Panasonic Wv Ns202 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Ns202 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
Configure the settings relating to the NTP server [NTP]
Click the [NTP] tab on the Basic setup page. (page 15)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this
page.
[Time adjustment]
Select the time adjustment method from the following.
Time adjusted by the selected method will be used as
the standard time of the camera.
Manual setup:Time set on the [Basic] tab on the
Basic setup page will be used as the standard time
of the...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-20.png "Page 21
21
Configure the settings relating to the NTP server [NTP]
Click the [NTP] tab on the Basic setup page. (page 15)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this
page.
[Time adjustment]
Select the time adjustment method from the following.
Time adjusted by the selected method will be used as
the standard time of the camera.
Manual setup:Time set on the [Basic] tab on the
Basic setup page will be used as the standard time
of the...")
21 Configure the settings relating to the NTP server [NTP] Click the [NTP] tab on the Basic setup page. (page 15) The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page. [Time adjustment] Select the time adjustment method from the following. Time adjusted by the selected method will be used as the standard time of the camera. Manual setup:Time set on the [Basic] tab on the Basic setup page will be used as the standard time of the...
Page 22
![Page 22
22
SD memory card setup
[SD memory card]
Select Use or Not use to determine whether or not to
use the SD memory card.
Default:Not use
Important:
• Before removing the SD memory card from the cam-
era, it is necessary to select Not use first.
• After inserting the SD memory card, it is necessary
to select Use to use the SD memory card.
[Notification of remaining]
When the E-mail notification function or the
Panasonic alarm protocol function is used to provide
notification of the remaining space of the...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-21.png "Page 22
22
SD memory card setup
[SD memory card]
Select Use or Not use to determine whether or not to
use the SD memory card.
Default:Not use
Important:
• Before removing the SD memory card from the cam-
era, it is necessary to select Not use first.
• After inserting the SD memory card, it is necessary
to select Use to use the SD memory card.
[Notification of remaining]
When the E-mail notification function or the
Panasonic alarm protocol function is used to provide
notification of the remaining space of the...")
22 SD memory card setup [SD memory card] Select Use or Not use to determine whether or not to use the SD memory card. Default:Not use Important: • Before removing the SD memory card from the cam- era, it is necessary to select Not use first. • After inserting the SD memory card, it is necessary to select Use to use the SD memory card. [Notification of remaining] When the E-mail notification function or the Panasonic alarm protocol function is used to provide notification of the remaining space of the...
Page 23
![Page 23
23
Note:
When FTP error is selected for Save trigger, the
file name entered for File name on the [FTP] tab of
the Network setup page will be used for the file
name of the image saved on the SD memory card.
[Frame rate]
Select an image save interval from the following.
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
Default:1 fps
[Number of images]
Select a number of alarm images to be saved on the SD
memory card from the following.
10 pics/20 pics/ 30 pics/50 pics/100 pics/200 pics/
300 pics/500 pics/1000...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-22.png "Page 23
23
Note:
When FTP error is selected for Save trigger, the
file name entered for File name on the [FTP] tab of
the Network setup page will be used for the file
name of the image saved on the SD memory card.
[Frame rate]
Select an image save interval from the following.
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
Default:1 fps
[Number of images]
Select a number of alarm images to be saved on the SD
memory card from the following.
10 pics/20 pics/ 30 pics/50 pics/100 pics/200 pics/
300 pics/500 pics/1000...")
23 Note: When FTP error is selected for Save trigger, the file name entered for File name on the [FTP] tab of the Network setup page will be used for the file name of the image saved on the SD memory card. [Frame rate] Select an image save interval from the following. 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps Default:1 fps [Number of images] Select a number of alarm images to be saved on the SD memory card from the following. 10 pics/20 pics/ 30 pics/50 pics/100 pics/200 pics/ 300 pics/500 pics/1000...
Page 24
![Page 24
24
Copy images saved on the SD memory card onto the PC [SD memory card images]
Click the [SD memory card] tab on the Basic setup page. (page 15)
The following are descriptions of how to copy images saved on the SD memory card onto the PC.
It is necessary in advance to select Allow for FTP access on the [Network] tab of the Network setup page
(page 59).
Important:
• It is impossible to copy images saved on the SD memory card when another user is simultaneously obtaining
images from the SD memory card....](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-23.png "Page 24
24
Copy images saved on the SD memory card onto the PC [SD memory card images]
Click the [SD memory card] tab on the Basic setup page. (page 15)
The following are descriptions of how to copy images saved on the SD memory card onto the PC.
It is necessary in advance to select Allow for FTP access on the [Network] tab of the Network setup page
(page 59).
Important:
• It is impossible to copy images saved on the SD memory card when another user is simultaneously obtaining
images from the SD memory card....")
24 Copy images saved on the SD memory card onto the PC [SD memory card images] Click the [SD memory card] tab on the Basic setup page. (page 15) The following are descriptions of how to copy images saved on the SD memory card onto the PC. It is necessary in advance to select Allow for FTP access on the [Network] tab of the Network setup page (page 59). Important: • It is impossible to copy images saved on the SD memory card when another user is simultaneously obtaining images from the SD memory card....
Page 25
2 GB 1 GB 512 MB 256 MB 128 MB 64 MB Size of SD memory card 25 Size of SD memory card Approx. 32 000 pics Approx. 16 000 pics Approx. 8 000 pics Approx. 4 000 pics Approx. 2 000 pics Approx. 1 000 picsApprox. 36 000 pics Approx. 18 000 pics Approx. 9 000 pics Approx. 4 500 pics Approx. 2 250 pics Approx. 1 125 picsApprox. 38 000 pics Approx. 19 000 pics Approx. 9 500 pics Approx. 4 750 pics Approx. 2 375 pics Approx. 1 187 picsApprox. 40 000 pics Approx. 20 000 pics Approx. 10 000 pics Approx. 5 000...
Page 26
![Page 26
26
Configure the settings relating to images and audio [Camera
setup]
The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset
positions, audio, etc. can be configured on this page.
The Camera setup page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab and
the [Audio] tab.
Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the Camera setup page. (page 15)
JPEG...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-25.png "Page 26
26
Configure the settings relating to images and audio [Camera
setup]
The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset
positions, audio, etc. can be configured on this page.
The Camera setup page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab and
the [Audio] tab.
Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the Camera setup page. (page 15)
JPEG...")
26 Configure the settings relating to images and audio [Camera setup] The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset positions, audio, etc. can be configured on this page. The Camera setup page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab and the [Audio] tab. Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4] Click the [JPEG/MPEG-4] tab on the Camera setup page. (page 15) JPEG...
Page 27
![Page 27
27
MPEG-4 setup
Configure the settings relating to MPEG-4 image such as Max bit rate (per 1 client), Image capture size, Image
quality, etc. in this section. Refer to page 26 for further information about the settings relating to JPEG images.
[MPEG-4 transmission]
Select ON or OFF to determine whether or not to
transmit MPEG-4 images.
ON:Transmits MPEG-4 images.
OFF:Does not transmit MPEG-4 images.
Default:ON
Note:
When ON is selected for MPEG-4 transmission,
displaying of MPEG-4 images or JPEG images...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-26.png "Page 27
27
MPEG-4 setup
Configure the settings relating to MPEG-4 image such as Max bit rate (per 1 client), Image capture size, Image
quality, etc. in this section. Refer to page 26 for further information about the settings relating to JPEG images.
[MPEG-4 transmission]
Select ON or OFF to determine whether or not to
transmit MPEG-4 images.
ON:Transmits MPEG-4 images.
OFF:Does not transmit MPEG-4 images.
Default:ON
Note:
When ON is selected for MPEG-4 transmission,
displaying of MPEG-4 images or JPEG images...")
27 MPEG-4 setup Configure the settings relating to MPEG-4 image such as Max bit rate (per 1 client), Image capture size, Image quality, etc. in this section. Refer to page 26 for further information about the settings relating to JPEG images. [MPEG-4 transmission] Select ON or OFF to determine whether or not to transmit MPEG-4 images. ON:Transmits MPEG-4 images. OFF:Does not transmit MPEG-4 images. Default:ON Note: When ON is selected for MPEG-4 transmission, displaying of MPEG-4 images or JPEG images...
Page 28
![Page 28
28
[Unicast port1 (Image)]
Enter the unicast port number (used to transmit images
from the camera).
Available port number:1024 - 50000 (Only even num-
bers are available.)
Default:32004
[Unicast port2 (Audio)]
Enter the unicast port number (used to transmit audio
from the camera).
Available port number:1024 - 50000 (Only even num-
bers are available.)
Default:33004
[Multicast address]
Enter the multicast IP address.
Images and audio will be transmitted to the designated
IP address.
Available IP...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-27.png "Page 28
28
[Unicast port1 (Image)]
Enter the unicast port number (used to transmit images
from the camera).
Available port number:1024 - 50000 (Only even num-
bers are available.)
Default:32004
[Unicast port2 (Audio)]
Enter the unicast port number (used to transmit audio
from the camera).
Available port number:1024 - 50000 (Only even num-
bers are available.)
Default:33004
[Multicast address]
Enter the multicast IP address.
Images and audio will be transmitted to the designated
IP address.
Available IP...")
28 [Unicast port1 (Image)] Enter the unicast port number (used to transmit images from the camera). Available port number:1024 - 50000 (Only even num- bers are available.) Default:32004 [Unicast port2 (Audio)] Enter the unicast port number (used to transmit audio from the camera). Available port number:1024 - 50000 (Only even num- bers are available.) Default:33004 [Multicast address] Enter the multicast IP address. Images and audio will be transmitted to the designated IP address. Available IP...
Page 29
![Page 29
29
Configure the settings relating to the camera title and the camera operations [Cam
Function]
Click the [Cam Function] tab on the Camera setup page. (page 15)
Configure the settings relating to camera title and the camera operations on this page.
[Camera title on screen]
Select ON or OFF to determine whether or not to dis-
play the camera title on images.
Default:OFF
[Camera title on screen (0-9, A-Z)]
Enter the camera title to be displayed on images.
Number of characters for the camera title:0 - 16...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-28.png "Page 29
29
Configure the settings relating to the camera title and the camera operations [Cam
Function]
Click the [Cam Function] tab on the Camera setup page. (page 15)
Configure the settings relating to camera title and the camera operations on this page.
[Camera title on screen]
Select ON or OFF to determine whether or not to dis-
play the camera title on images.
Default:OFF
[Camera title on screen (0-9, A-Z)]
Enter the camera title to be displayed on images.
Number of characters for the camera title:0 - 16...")
29 Configure the settings relating to the camera title and the camera operations [Cam Function] Click the [Cam Function] tab on the Camera setup page. (page 15) Configure the settings relating to camera title and the camera operations on this page. [Camera title on screen] Select ON or OFF to determine whether or not to dis- play the camera title on images. Default:OFF [Camera title on screen (0-9, A-Z)] Enter the camera title to be displayed on images. Number of characters for the camera title:0 - 16...
Page 30
![Page 30
30
[Upside-down]
Select ON (desktop) or OFF (ceiling) to determine
how the camera is to be installed.
ON (desktop):Select this when the camera is to be
installed with the dome side up.
OFF (ceiling):Select this when the camera is to be
installed with the dome side down.
Default:OFF (ceiling)
[EL-ZOOM]
Select ON or OFF to determine whether or not to use
the electronic zoom.
ON (Max X10):Images can be zoomed in on with the
optical zoom (1x - 22 x) and the electronic zoom
(23x – 220x).
OFF:Does not use the...](http://img.usermanuals.tech/thumb/58/68512/w300_wv-ns202_en_om_d-29.png "Page 30
30
[Upside-down]
Select ON (desktop) or OFF (ceiling) to determine
how the camera is to be installed.
ON (desktop):Select this when the camera is to be
installed with the dome side up.
OFF (ceiling):Select this when the camera is to be
installed with the dome side down.
Default:OFF (ceiling)
[EL-ZOOM]
Select ON or OFF to determine whether or not to use
the electronic zoom.
ON (Max X10):Images can be zoomed in on with the
optical zoom (1x - 22 x) and the electronic zoom
(23x – 220x).
OFF:Does not use the...")
30 [Upside-down] Select ON (desktop) or OFF (ceiling) to determine how the camera is to be installed. ON (desktop):Select this when the camera is to be installed with the dome side up. OFF (ceiling):Select this when the camera is to be installed with the dome side down. Default:OFF (ceiling) [EL-ZOOM] Select ON or OFF to determine whether or not to use the electronic zoom. ON (Max X10):Images can be zoomed in on with the optical zoom (1x - 22 x) and the electronic zoom (23x – 220x). OFF:Does not use the...