Panasonic Wv Ns202 Operating Instructions Manual

11
Action at an Alarm Occurrence
The alarm action will be performed when the following alarms occur.
Alarm type
Terminal alarm:When connecting an alarm device such as a sensor to the EXT I/O connector 1-3 on the rear of
the camera, the alarm action (camera action at an alarm occurrence) will be performed when the connected
alarm device is activated. Alarm action to be performed differs depending on the settings configured in the
Camera motion on alarm section of the [Alarm] tab. (page 44)
VMD alarm:When...

12
Transmit images onto an FTP server
Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured
at an alarm occurrence or captured at a designated interval to an FTP server will become available.
Important:
• When using this function, set the user name and the password to access the FTP server to restrict users who
can log into the FTP server.
• To transmit images to the FTP server, select Not use for SD memory card, or select FTP error for Save...

13
Save images on the SD memory card when images fail to
transmit using the FTP periodic transmission function
Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem-
ory card. Images saved on the SD memory card can be obtained from the [SD memory card] tab of the Basic setup
page. 
(page 22)
To use the SD memory recording function featured in Panasonic’s network disk recorder, select OFF for FTP peri-
odic transmission (page 63) and FTP error...

14
About the network security of the camera
Equipped security functions
The following security functions are featured in this camera.
qAccess restrictions by the host authentication and the user authentication
It is possible to restrict users from accessing the camera by setting the host authentication and/or the user
authentication to ON. (pages 54 and 55)
wAccess restrictions by changing the HTTP port
It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port...

15
Display the setup menu and configure the settings of the camera using a PC
The settings of the camera can be configured on the setup menu.
The setup menu is only operable by users whose access level is 1. Administrator. 
How to display the setup menu
Step 1
Display the Live page. (page 4)
Step 2
Click the [Setup] button on the Live page. 
→The window with the user name and password entry
fields will be displayed. 
Step 3
Click the [OK] button after entering the user name and
the password.
→The setup...

16
Step 1
Click the desired button in the frame on the left of the
window to display the respective setup menu.
When there are tabs at the top of the setup page dis-
played in the frame on the right of the window, click the
desired tab to display and configure the setting items
relating to the name of the tab.
Step 2
Complete each setting item displayed in the frame on
the right of the window. 
Step 3
After completing each setting item, click the [SET] but-
ton to apply them. 
Important:
When there are...

17
About the setup menu window
q[Live] button
Click this button to display the Live page.
w[Basic setup] button
Click this button to display the Basic setup page.
The basic settings such as time and date and cam-
era title, and the settings relating to the NTP server
and the SD memory card can be configured on the
Basic setup page. Refer to page 19 for further
information.
e[Camera setup] button
Click this button to display the Camera setup page.
The settings relating to JPEG/MPEG-4 images and
camera...

18
i[Network setup] button
Click this button to display the Network setup page.
The network settings and the settings relating to
DDNS (Dynamic DNS), SNMP (Simple Network
management Protocol) and the FTP (File Transfer
Protocol) periodic transmission function can be con-
figured on the Network setup page. Refer to page
58 for further information.
o[Maintenance] button
Click this button to display the Maintenance page.
System log check, firmware upgrade and initializa-
tion of the setup menu can be...

19
Configure the basic settings of the camera [Basic setup]
The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD
memory card can be configured on the Basic setup page. 
The Basic setup page has 3 tabs; the [Basic] tab, the [NTP] tab and the [SD memory card] tab. 
Configure the basic settings [Basic]
Click the [Basic] tab on the Basic setup page. (page 15)
The settings such as the camera name, time and date, etc. can be configured on this page....

20
•SD memory card error LED:This LED will light
when the SD memory card is unavailable to save
images.
•Power LED:This LED will light when the power is
on.
[OSD Position]
Select a position where time and date, camera title, pre-
set ID, panning/tilting angle, zoom ratio are to be dis-
played on the Live page.
Upper left:The above information will be displayed at
the upper left corner of the main area on the Live
page.
Lower left:The above information will be displayed at
the lower left corner of the...