Panasonic Wv Nf284 Operating Instructions Manual

•Is the LAN cable (category 5) is firmly connected to
the network connector on the mounting side of the
camera? Installation
Guide
51
•Are you accessing the wrong IP address? 
Check the connection as follows:
With the Windows command prompt, 
> ping IP address of the camera
When the WV-NF284 replies, the camera is function-
ing normally.
If not, proceed either of the following. 
•Restart the camera and change the IP address by
using the Panasonic IP setup software within 20
minutes after the restart....

•Depending on the traffic of the network or the concen-
tration of access to the camera, there might be diffi-
culties displaying the camera picture. Click the reload
button of the browser to request the camera picture to
be refreshed. 
52
– •Depending on the version of your browser, there
might be difficulties refreshing the picture and operat-
ing the camera. 
It is recommended to use Internet Explorer 6.0 SP2.
•Is the power of the camera on? 
Check if the power of the camera is turned on. 
•Is the...

53
•Isn’t the write protect switch set to LOCK? 
When the write protect switch is set to LOCK, avail-
able size/total size indication of the SD memory card
will be **********KB/**********KB.
•Isn’t the SD memory card out of order?
There are limited times to overwrite on an SD memory
card. When frequently overwritten, it may be at the
end of product life. It is recommended to replace the
SD memory card. 
•Is the SD memory card formatted? 
Format the SD memory card.
•Open the Security tab of Internet...

54
•This may occur due to the display adapter and driver
combination. 
When this occurred, update the driver of the display
adapter to the latest version first. 
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows. 
The following are descriptions for when Microsoft XP
Professional SP2 is installed on the PC in use. 
(1) Right-click on the desktop and select Properties
from the displayed pop-up menu. 
(2) Select Settings from Display Properties, and
then click...

55
•Click Internet Options on the Tools menu of Internet
Explorer, and then click the [Security] tab. Then, click
the [Custom Level…] button to open the Security
Setting window. Under Miscellaneous, select
Enable for Allow script-initiated windows without
size or position constraints. Click the [OK] button. 
The Warning window will be displayed. Click the
[Yes] button. 
•Delete temporary internet files as follows. 
1. Select Internet Options… from Tools on the
menu bar of Internet Explorer
®. The...

Matsushita Electric Industrial Co., Ltd.
Osaka, Japan
http://panasonic.net
© 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.  N1206-0/1 3TR004678AAA       Printed in Japan