Panasonic Wv Nf284 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Nf284 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11
Step 3
Move the current directory to drive B and obtain images.
Notes:
•When logging in the camera, the current directory will be drive D. Images on the SD memory card can be found
in the FTP directory under drive B. Move to the FTP directory and obtain images.
Example: To obtain the image (img_06010101230000.jpg) using the Windows command prompt
qEnter c:\>ftp 192.168.0.10 and press the [Enter] key.
→FTP connection will be established with 192.168.0.10.
wLog in by entering the user name and the...](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-10.png "Page 11
11
Step 3
Move the current directory to drive B and obtain images.
Notes:
•When logging in the camera, the current directory will be drive D. Images on the SD memory card can be found
in the FTP directory under drive B. Move to the FTP directory and obtain images.
Example: To obtain the image (img_06010101230000.jpg) using the Windows command prompt
qEnter c:\>ftp 192.168.0.10 and press the [Enter] key.
→FTP connection will be established with 192.168.0.10.
wLog in by entering the user name and the...")
11 Step 3 Move the current directory to drive B and obtain images. Notes: •When logging in the camera, the current directory will be drive D. Images on the SD memory card can be found in the FTP directory under drive B. Move to the FTP directory and obtain images. Example: To obtain the image (img_06010101230000.jpg) using the Windows command prompt qEnter c:\>ftp 192.168.0.10 and press the [Enter] key. →FTP connection will be established with 192.168.0.10. wLog in by entering the user name and the...
Page 12
12 About the network security of this unit Equipped security functions The following security functions are featured in this camera. qAccess restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to on. (☞pages 34 and 35) wAccess restrictions by changing the HTTP port It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port...
Page 13
![Page 13
13
Display the Setup Menu and Configure the Settings of the Camera using a PC
The settings of the camera can be configured on the setup menu.
The setup menu is only operable by users whose access level is 1. Administrator.
How to display the setup menu
Step 1
Display the Live page (☞page 4).
Step 2
Click the [Setup] button on the Live page.
→The window with the user name and password entry
fields will be displayed.
Step 3
Click the [OK] button after entering the user name and
the password.
→Click...](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-12.png "Page 13
13
Display the Setup Menu and Configure the Settings of the Camera using a PC
The settings of the camera can be configured on the setup menu.
The setup menu is only operable by users whose access level is 1. Administrator.
How to display the setup menu
Step 1
Display the Live page (☞page 4).
Step 2
Click the [Setup] button on the Live page.
→The window with the user name and password entry
fields will be displayed.
Step 3
Click the [OK] button after entering the user name and
the password.
→Click...")
13 Display the Setup Menu and Configure the Settings of the Camera using a PC The settings of the camera can be configured on the setup menu. The setup menu is only operable by users whose access level is 1. Administrator. How to display the setup menu Step 1 Display the Live page (☞page 4). Step 2 Click the [Setup] button on the Live page. →The window with the user name and password entry fields will be displayed. Step 3 Click the [OK] button after entering the user name and the password. →Click...
Page 14
![Page 14
14
Step 1
Click the desired button in the frame on the left of the
window to display the respective setup menu.
When there are tabs at the top of the setup page dis-
played in the frame on the right of the window, click the
desired tab to display and configure the setting items
relating to the name of the tab.
Step 2
Complete each setting item displayed in the frame on
the right of the window.
Step 3
After completing each setting item, click the [SET] but-
ton (or [REG] button) to apply them....](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-13.png "Page 14
14
Step 1
Click the desired button in the frame on the left of the
window to display the respective setup menu.
When there are tabs at the top of the setup page dis-
played in the frame on the right of the window, click the
desired tab to display and configure the setting items
relating to the name of the tab.
Step 2
Complete each setting item displayed in the frame on
the right of the window.
Step 3
After completing each setting item, click the [SET] but-
ton (or [REG] button) to apply them....")
14 Step 1 Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the setup page dis- played in the frame on the right of the window, click the desired tab to display and configure the setting items relating to the name of the tab. Step 2 Complete each setting item displayed in the frame on the right of the window. Step 3 After completing each setting item, click the [SET] but- ton (or [REG] button) to apply them....
Page 15
![Page 15
15
About the operation window
q[Live] button
The Live page will be displayed.
w[Basic setup] button
Click this button to display the Basic setup page.
The basic settings such as time and date and cam-
era name, and the settings relating to the NTP serv-
er and the SD memory card can be configured on
the Basic setup page. Refer to page 17 for further
information.
e[Camera setup] button
Click this button to display the Camera setup page.
The settings relating to image from the camera such
as image...](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-14.png "Page 15
15
About the operation window
q[Live] button
The Live page will be displayed.
w[Basic setup] button
Click this button to display the Basic setup page.
The basic settings such as time and date and cam-
era name, and the settings relating to the NTP serv-
er and the SD memory card can be configured on
the Basic setup page. Refer to page 17 for further
information.
e[Camera setup] button
Click this button to display the Camera setup page.
The settings relating to image from the camera such
as image...")
15 About the operation window q[Live] button The Live page will be displayed. w[Basic setup] button Click this button to display the Basic setup page. The basic settings such as time and date and cam- era name, and the settings relating to the NTP serv- er and the SD memory card can be configured on the Basic setup page. Refer to page 17 for further information. e[Camera setup] button Click this button to display the Camera setup page. The settings relating to image from the camera such as image...
Page 16
![Page 16
16
i[Network setup] button
Click this button to display the Network setup page.
The network settings and the settings relating to
DDNS (Dynamic DNS), SNMP (Simple Network
management Protocol) and FTP (File Transfer
Protocol) can be configured on the Network setup
page. Refer to page 38 for further information.
o[Maintenance] button
Click this button to display the Maintenance page.
System log check, firmware upgrade and initializa-
tion of the setup menu can be performed on the
Maintenance page. Refer...](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-15.png "Page 16
16
i[Network setup] button
Click this button to display the Network setup page.
The network settings and the settings relating to
DDNS (Dynamic DNS), SNMP (Simple Network
management Protocol) and FTP (File Transfer
Protocol) can be configured on the Network setup
page. Refer to page 38 for further information.
o[Maintenance] button
Click this button to display the Maintenance page.
System log check, firmware upgrade and initializa-
tion of the setup menu can be performed on the
Maintenance page. Refer...")
16 i[Network setup] button Click this button to display the Network setup page. The network settings and the settings relating to DDNS (Dynamic DNS), SNMP (Simple Network management Protocol) and FTP (File Transfer Protocol) can be configured on the Network setup page. Refer to page 38 for further information. o[Maintenance] button Click this button to display the Maintenance page. System log check, firmware upgrade and initializa- tion of the setup menu can be performed on the Maintenance page. Refer...
Page 17
![Page 17
17
Configure the basic settings of the camera [Basic setup]
The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD
memory card can be configured on the Basic setup page.
The Basic setup page has 3 tabs of the [Basic] tab, the [NTP] tab and the [SD memory card] tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the Basic setup page. (☞page 15)
The settings such as the camera name, time and date, etc. can be configured on this...](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-16.png "Page 17
17
Configure the basic settings of the camera [Basic setup]
The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD
memory card can be configured on the Basic setup page.
The Basic setup page has 3 tabs of the [Basic] tab, the [NTP] tab and the [SD memory card] tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the Basic setup page. (☞page 15)
The settings such as the camera name, time and date, etc. can be configured on this...")
17 Configure the basic settings of the camera [Basic setup] The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD memory card can be configured on the Basic setup page. The Basic setup page has 3 tabs of the [Basic] tab, the [NTP] tab and the [SD memory card] tab. Configure the basic settings [Basic] Click the [Basic] tab on the Basic setup page. (☞page 15) The settings such as the camera name, time and date, etc. can be configured on this...
Page 18
![Page 18
18
Configure the settings relating to the NTP server [NTP]
Click the [NTP] tab on the Basic setup page. (☞page 15)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this
page.
[Time adjustment]
Select the time adjustment method from the following.
Manual setup:Time set on the [Basic] tab on the
Basic setup page will be used as the standard time
of the camera.
Synchronization with NTP server:Time automatically
adjusted by synchronizing with...](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-17.png "Page 18
18
Configure the settings relating to the NTP server [NTP]
Click the [NTP] tab on the Basic setup page. (☞page 15)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this
page.
[Time adjustment]
Select the time adjustment method from the following.
Manual setup:Time set on the [Basic] tab on the
Basic setup page will be used as the standard time
of the camera.
Synchronization with NTP server:Time automatically
adjusted by synchronizing with...")
18 Configure the settings relating to the NTP server [NTP] Click the [NTP] tab on the Basic setup page. (☞page 15) The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page. [Time adjustment] Select the time adjustment method from the following. Manual setup:Time set on the [Basic] tab on the Basic setup page will be used as the standard time of the camera. Synchronization with NTP server:Time automatically adjusted by synchronizing with...
Page 19
![Page 19
19
■SD memory card setup
[About SD memory card]
Select Use or Not use to determine whether or not to
use the SD memory card.
Important:
•Before removing the SD memory card from the cam-
era, it is necessary to select Not use first.
•After inserting the SD memory card, it is necessary
to select Use to use the SD memory card.
[Notification for SD memory card]
When the E-mail notification function or the
Panasonic alarm protocol function is used to provide
notification of the remaining space of the SD...](http://img.usermanuals.tech/thumb/58/68501/w300_wv-nf284_en_om_d-18.png "Page 19
19
■SD memory card setup
[About SD memory card]
Select Use or Not use to determine whether or not to
use the SD memory card.
Important:
•Before removing the SD memory card from the cam-
era, it is necessary to select Not use first.
•After inserting the SD memory card, it is necessary
to select Use to use the SD memory card.
[Notification for SD memory card]
When the E-mail notification function or the
Panasonic alarm protocol function is used to provide
notification of the remaining space of the SD...")
19 ■SD memory card setup [About SD memory card] Select Use or Not use to determine whether or not to use the SD memory card. Important: •Before removing the SD memory card from the cam- era, it is necessary to select Not use first. •After inserting the SD memory card, it is necessary to select Use to use the SD memory card. [Notification for SD memory card] When the E-mail notification function or the Panasonic alarm protocol function is used to provide notification of the remaining space of the SD...
Page 20
20 2 GB 1 GB 512 MB 256 MB 128 MB 64 MB Size of SD memory card Size of SD memory card Approx. 32 000 pics Approx. 16 000 pics Approx. 8 000 pics Approx. 4 000 pics Approx. 2 000 pics Approx. 1 000 picsApprox. 36 000 pics Approx. 18 000 pics Approx. 9 000 pics Approx. 4 500 pics Approx. 2 250 pics Approx. 1 125 picsApprox. 38 000 pics Approx. 19 000 pics Approx. 9 500 pics Approx. 4 750 pics Approx. 2 375 pics Approx. 1 187 picsApprox. 40 000 pics Approx. 20 000 pics Approx. 10 000 pics Approx. 5 000...