Panasonic Wv Nf284 Operating Instructions Manual

WV-NF284
INSERTA
D
JUS
TLOCK
DOCOMEV
ER
DOMECOV
ER
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
Network Camera
Network Operating Instructions 
Model No.WV-NF284 

2
CONTENTS
Preface ............................................................................................................................ 3
About these operating instructions  .............................................................................. 3
Trademarks and Registered Trademarks  ................................................................... 3
Viewer Software  .......................................................................................................... 3
Monitor...

3
Preface
About these operating instructions
There are 2 sets of operating instructions for the WV-NF284 as follows.
•Installation Guide
•Network operating instructions
These network operating instructions contain descriptions of how to operate this product using a PC via a network
and of how to configure the settings.
Refer to the installation guide for descriptions of how to install this product and of how to connect to a network.
Adobe
®Reader is required to read PDF. When the Adobe®Reader is not...

4
Monitor Images on a PC
Notes:
•When ON is selected for User Authentication 
(☞page 34), the authentication window will be dis-
played before displaying live images for the user
name and password entries. The default user name
and password are as follows. 
User name: admin
Password: 12345
When accessing the camera without changing the
default password, the pop-up window saying that it
is recommended to change the password will be dis-
played. 
To enhance the security, change the password for
the user...

5
About the Live page
q[Setup] button (*1)
Click this button to display the setup menu. The but-
ton will turn green and the setup menu will be dis-
played. 
w[Live] button
Click this button to display the Live page. The but-
ton will turn green and the Live page will be dis-
played. 
eMulti-screen buttons
Images from multiple cameras can be displayed on
a multi-screen by registering cameras on the setup
menu. (☞page 7)rImage type buttons
:The letters MPEG-4 on the button will
turn green and an MPEG-4...

6
tImage capture size buttons
These buttons will be displayed only when a JPEG
image is displayed. 
:The letters VGA on the button will turn
green and images will be displayed in VGA
size. 
:The letters QVGA on the button will turn
green and images will be displayed in
QVGA size. 
yZOOM buttons (*2)
:The zoomed image will be zoomed out.
(Image displayed in the original size cannot be
zoomed out.) 
:The zoomed image will return to the original
size. 
:The displayed image will be zoomed in. 
Note:
When ON...

7
Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multi-screen. Images from up to 4 cameras can be displayed
simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can
be registered as a group and up to 2 groups (8 cameras) can be registered. (☞page 26)
Important:
•Select OFF for both the user authentication and the host authentication of the camera to be registered. 
(☞pages 34 and 35)
•Only JPEG images can...

8
Action at an Alarm Occurrence
The alarm action will be performed when the following alarm occur. 
Alarm type
Terminal alarm:When connecting an alarm device such as a sensor to the alarm connector on the mounting
side of the camera, the alarm action will be performed when the connected alarm device activated. 
VMD alarm:When a motion is detected in the set VMD area, the alarm action will be performed. 
* VMD stands for Video Motion Detection. 
Command alarm:When a Panasonic alarm protocol (☞page 27) is...

9
Transmit Images onto an FTP Server
Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured
at an alarm occurrence or captured at a designated interval to an FTP server will become available. 
Important:
When using this function, set the user name and password to restrict users who can log into the FTP server. 
Transmit an alarm image at an alarm occurrence (Alarm image
FTP transmission)
An alarm image can be transmitted at an alarm occurrence...

10
Save images on the SD memory card when failed to transmit
images by the FTP periodic transmission function
Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem-
ory card. To obtain the images saved on the SD memory card, use the Windows command prompt or FTP client
software. The obtained images can be browsed on a PC. 
*When using the SD memory REC function of a Panasonic’s network disk recorder, select OFF for the FTP
periodic transmission...