Panasonic Uf 7000 Operating Instructions Manual

31
Getting To Know 
Your Machine
Rear Cover
Paper TrayRear Paper Tray Cover
Paper TrayFront Cover
Toner CartridgeMisfed Paper
Misfed Paper
Front Cover
6
345
6
345
89
8
CAUTION
Do not scratch or touch the surface of the 
OPC Drum (Green) with bare hands.  
The OPC Drum is sensitive to light. To prevent 
optical exposure problems, do not expose the 
OPC Drum to direct sunlight or bright light.
ADF Cover
34
ADF TrayMisfed Paper 

32
Getting To Know Your Machine
Operation Chart
QProblem Solving
ƒUser Error Codes (U Code)
ƒJam Error Codes (J Code)
NOTE1. The J## Code indicates the most probable Jam location. If the jam message reappear after 
the jam is cleared, paper is most likely jammed at other location(s). Check the Jam Error 
Codes Table above for other check points and remove all misfed paper.
2. Make sure that the Jam Error Code disappears after removing the misfed paper.
3. The Jam Error Code will not disappear if the...

33
Getting To Know 
Your Machine
NOTE:When the optional Tray-2 is installed and the same size of paper is loaded in both trays, the paper will be 
supplied from Paper Tray-2 first. This is the default setting, if you wish to change the setting, please consult with 
your authorized Panasonic dealer.
To make copies from the Sheet Bypass
1. Set the original(s) on the ADF.
2. Press .
3. Set a sheet of paper into the Sheet Bypass.
4.PRESS ✽ appears in the upper line of the LCD display.
5. If you wish to make...

34
Getting To Know Your Machine
Mode Setting
QUsing the Functions
The following functions can be started by first pressing  and then entering the function number, or by 
pressing  or  scroll key repeatedly until the desired function appears on the LCD display.
NOTE1.  Available when Fax Parameter No.119 is set to 1:One-Touch. (See page 11 2)
2. The Select Mode (   ) settings can be temporarily changed for the current 
communication. Upon its completion, however, these parameters are returned to their...

35
Getting To Know 
Your Machine
NOTE3. To adjust the character brightness of the LCD display, press    , 
 , and then press  or  until the desired brightness is achieved. 
Set Mode
1 = User Parameters (See page 106)
Date & Time
Logo
Character ID
ID Number (Fax Telephone Number)
2 = Address Book
(One-Touch/Abbreviated Numbers) (see Note 1) (See page 96)
3 = Program Keys (See page 58)
4 = Fax Parameters (See page 108)
8 = Maintenance = Toner Order Form/Toner Replacement/ (See page 28) 
LCD Brightness (see...

36
Getting To Know Your Machine
Control Panel
No.IconContentsNo.IconContents
PRINT Key
Used for Printer function.SCAN/FILE Key
Used for optional Network Scanner 
Function.
(Available if the optional Internet Fax/
Email/Network Scanner Module (UE-
404090) is installed.)
EMAIL Key
Used to select the EMAIL mode.
(Available if the optional Internet Fax/
Email/Network Scanner Module (UE-
404090) is installed.)ENERGY SAVER Key
Used to switch the machine into energy 
saving.
DUPLEX Key
Used to scan the...

37
Getting To Know 
Your Machine
REDIAL/PAUSE Key
Used to enter a pause when 
programming or dialing a telephone 
number, or to redial the last dialed 
number. (See page 40)ABBR DIAL Key
Used to start Abbreviated Dialing. (See 
page 22)
STOP Key
Press to abort the current operation and 
reset selected mode(s)  (Email/Copy/
Scanner Functions) and return to the 
Facsimile Function.COPY Key
Used for Copy function.
START Key
Press this key to start activation.MONITOR Key
Used to start On-Hook Dialing....

38
Facsimile Features
Sending Documents
QGeneral Description
Your machine quickly stores the document(s) into the machines memory. Then, starts to dial the telephone number. If the 
transmission fails, your machine will retransmit the remaining unsuccessful page(s) automatically.
QMemory Transmissions
NOTE1. If you need to dial a prefix to get an outside line, dial it first then press  to enter a 
pause (represented by a -) before dialing the full number. 
Ex: 9   5551234 
Or use Dial Prefix function to...

39
Facsimile Features
QTo Stop the Transmission
NOTE
3. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, 
press 
 (represented by a /). 
The dialing mode will be changed from Pulse to Tone after dialing the digit /. 
Ex: 9   5551234
4. When transmitting at S-Fine or 600 dpi, there is a possibility that printing quality may 
deteriorate at the remote station due to its reception capability. If this occurs, re-send with 
Direct Transmission or use Fine...

40
Facsimile Features
Sending Documents
QUsing One-Touch Dialing
QRedialing the Last Dialed Numbers
(When Fax Parameter No.119 is set to 
1:One-Touch, see page 112.)
One-Touch Dialing can be used when the 
Telephone Number(s) are registered in the 
One-Touch Keys up to 80 stations  
(2 stations with each One-Touch Key, 1 - 40).21
Press One-Touch 
Key (1 - 40) ADF Tray
Original Guides
Adjust to the original’s width.
ABC
Lower Indicator
If two Stations are registered 
onto the One-Touch Key.or
Press...