Panasonic UF 6300 User Manual

One-Touch/Abbreviated Dialling Numbers
31
Programming 
Your Machine
NOTE1. If you require a special access number to get an outside line, enter it first and then press 
. A hyphen - is displayed for pause.
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, 
press   (Represented by a/). The dialling method will be changed from Pulse to Tone after 
dialling the digit /. 
Ex: 9 PAUSE * 5551234
3. You can search for an unused One-Touch key or ABBR. number by...

One-Touch/Abbreviated Dialling Numbers
32
If you have to change or delete any of the One-Touch/Abbreviated dialling numbers, follow the steps below.
NOTE1. If you made a mistake, use  or   to move the cursor beyond the incorrect number, press 
 and then re-enter the new number.
Editing One-Touch/Abbreviated Dialling Numbers
To change the settings of a One-Touch/ABBR dialling number
1
    
1:ONE-TOUCH
2:ABBR NO.
2Select   for One-Touch Dialling number
Select   for ABBR. Dialling Number
Ex:ONE-TOUCH<  >...

One-Touch/Abbreviated Dialling Numbers
33
Programming 
Your Machine
To delete the settings of One-Touch/ABBR Dialling number
1
    
1:ONE-TOUCH
2:ABBR NO.
2Select   for One-Touch Dialling number
Select   for ABBR. Dialling Number
Ex:
ONE-TOUCH<  >
PRESS ONE-TOUCH
3
Enter the station you wish to delete.
Ex:
 SALES DEPT
9
-555 1234
4
 SALES DEPT
E
NTER TEL. NO.
5
To return to standby, press  .
ONE-TOUCH<  >
PRESS ONE-TOUCH
72
1
2
1
Stop
UF6300_FAX_UK_PJQMC1263ZB.book  33 ページ  ２００８年１２月１０日　水曜日　午後１時２６分...

One-Touch/Abbreviated Dialling Numbers
34
After programming a one-touch dialling number, you can print out the directory sheet which includes the first 
12 characters of each station name.  Cut along the dotted line and place it over the One-Touch key under 
the Directory Sheet Cover.  To print out a directory sheet, follow the steps below.
Printing Out a Directory Sheet
1
 
PRINT OUT      (1-7)
ENTER NO. OR 
∨ ∧
2
 
Your machine prints out the directory sheet.
* PRINTING *
DIRECTORY SHEET...

35
Programming 
Your Machine
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the 
Parameter Table, are preset for you and do not need to be changed. If you do want to made a change, read 
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily 
changed by simple key operations just before a transmission is made. When the transmission ends, 
however, these parameters return to their...

Customizing Your Machine
36
Fax Parameter Table
No. ParameterSetting 
NumberSetting Comments
01 CONTRAST (HOME) 1 NORMAL Setting the home position of the CONTRAST key.
2LIGHTER
3 DARKER
02 RESOLUTION 
(HOME)1 STANDARD Setting the home position for the RESOLUTION.
2
FINE
3S-FINE
4 HALFTONE 
(FINE)
5HALFTONE
(S-FINE)
04 STAMP (HOME) 1 OFF Setting the home position of the STAMP key.
To select the stamp function when document is stored in 
memory, see Fax Parameter No. 28. 2ON
05 MEMORY (HOME) 1 OFF Setting...

Customizing Your Machine
37
Programming 
Your Machine
18 OP CALL TIMER 1 20SEC Selecting the length of time that your machine signals 
(rings) for an incoming voice call in Fax/Tel Auto Switching 
mode.  (See page 68) 230SEC
340SEC
450SEC
19 OGM LENGTH 
(TAM I/F)1 1SEC Setting for the OGM length of your TAM from 1 to 60 
seconds. The machine will not start to detect SILENCE 
until the time setting has lapsed.
(Default = 20 sec.) --- ---
60 60SEC
20 SILENT DETECTION 
(TAM I/F)1 INVALID Selecting the...

Customizing Your Machine
38
Fax Parameter Table
34 ENERGY SAVER 
MODE1 OFF To reduce the power consumption in standby, select either 
Energy-Saver or Sleep mode and specify the Delay Time 
(1 to 120 minutes) for the machine to enter into the 
selected mode. 
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
OFF : The unit will remain in standby mode 
and consume more energy than when 
in Energy-Saver or Sleep modes.
ENERGY SAVER: Saves energy by consuming less 
power than...

Customizing Your Machine
39
Programming 
Your Machine
51 REMOTE 
DIAGNOSTIC1 INVALID Selecting whether or not the machine accepts to update 
the firmware or Remote Diagnostics from the remote 
station. Please ask your Panasonic Authorized Dealer for 
details. 2VALID
52 DIAGNOSTIC 
PASSWORD(----) Setting the password for Remote Diagnostic Mode.  
Please ask your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS 
PSWD(----) Setting a 20-digit password for secured sub-address 
communication.
54 FAX...

Customizing Your Machine
40
Fax Parameter Table
NOTE1. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List. 
(See page 135)
2. The contents of Fax Parameter may differ depending on regulations and specifications in the 
countries. 133 JOB BUILD 1 OFF Selecting whether the machine performs Job Build when 
the total number of documents exceed the maximum 
capacity of the ADF, or when scanning the documents 
manually one at a time. If you place the documents on the...