Panasonic Sv As3 Operating Instructions Manual
Have a look at the manual Panasonic Sv As3 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56VQT0P18
4Select a picture and then press the
Jog Ball.
5Check the setting, select [Print start]
and then press the Jog Ball.
– When printing is finished, the message
[PRINTING COMPLETED] appears.
To cancel printing, press the [MENU] button.
∫To change the print setting
When you select [Change settings] in Step 5, you can change 3 items
described in the table below. Select and set the desired item with the
Jog Ball.
The items which are not supported by the printer will not be displayed.
When...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-55.png "Page 56
56VQT0P18
4Select a picture and then press the
Jog Ball.
5Check the setting, select [Print start]
and then press the Jog Ball.
– When printing is finished, the message
[PRINTING COMPLETED] appears.
To cancel printing, press the [MENU] button.
∫To change the print setting
When you select [Change settings] in Step 5, you can change 3 items
described in the table below. Select and set the desired item with the
Jog Ball.
The items which are not supported by the printer will not be displayed.
When...")
![Page 58
58VQT0P18
≥Error messages also appear in the following cases. Check the
message before connecting.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Messages displayedConditions
USE BOTH AC
ADAPTOR AND
BATTERYWhen the battery is not inserted
When the AC adaptor is not connected
When the AC adaptor is unplugged during
connection
SET TO PLAY MODEWhen connecting in the recording mode
NO CARDWhen the card is not inserted
CHECK CARDWhen...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-57.png "Page 58
58VQT0P18
≥Error messages also appear in the following cases. Check the
message before connecting.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Messages displayedConditions
USE BOTH AC
ADAPTOR AND
BATTERYWhen the battery is not inserted
When the AC adaptor is not connected
When the AC adaptor is unplugged during
connection
SET TO PLAY MODEWhen connecting in the recording mode
NO CARDWhen the card is not inserted
CHECK CARDWhen...")
![Page 59
59VQT0P18
3Roll the Jog Ball left or right to select
the desired file.
(Only when [Single print] is selected)
4Roll the Jog Ball up or down to select
the number of prints and then press
the Jog Ball.
The number of prints can be set from 1 to 99.
If you want to set DPOF setting on other
pictures when [Single print] is selected, repeat
Steps 3–4.
5Press the [MENU] button.
– The setting is completed.
∫When you confirm pictures with DPOF setting
Select [Check DPOF] in Step 2 and then press the Jog...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-58.png "Page 59
59VQT0P18
3Roll the Jog Ball left or right to select
the desired file.
(Only when [Single print] is selected)
4Roll the Jog Ball up or down to select
the number of prints and then press
the Jog Ball.
The number of prints can be set from 1 to 99.
If you want to set DPOF setting on other
pictures when [Single print] is selected, repeat
Steps 3–4.
5Press the [MENU] button.
– The setting is completed.
∫When you confirm pictures with DPOF setting
Select [Check DPOF] in Step 2 and then press the Jog...")
![Page 60
60VQT0P18
∫When you print the date in DPOF printing
Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation
screen and then press the Jog Ball.
Date printing is set to all the pictures that DPOF setting is set. (You
cannot set date printing for each picture.)
You cannot print the date on the pictures if the recording date is not
recorded.
The date may be cut or not be displayed depending on the printer.
∫When you cancel DPOF setting
Set the number of prints to [0] in Step 4.
≥If the...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-59.png "Page 60
60VQT0P18
∫When you print the date in DPOF printing
Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation
screen and then press the Jog Ball.
Date printing is set to all the pictures that DPOF setting is set. (You
cannot set date printing for each picture.)
You cannot print the date on the pictures if the recording date is not
recorded.
The date may be cut or not be displayed depending on the printer.
∫When you cancel DPOF setting
Set the number of prints to [0] in Step 4.
≥If the...")
![Page 62
62VQT0P18
1Insert a card which includes audio files.
2Connect the remote controller and the stereo
earphones.
You cannot listen to the audio on this unit without the use of
earphones.
3Slide the Power Switch to [ON].
– The Power Lamp lights in red.
Slide the Record/Playback Mode
Switch to the playback mode [ ].
4Press the [MODE] button and then
select [Audio] with the Jog Ball.
1Remote Controller (supplied)
2Stereo Earphones (supplied)
1 2
AudioEXIT
Playing Music (continued)
VQT0P18Eng.book 62...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-61.png "Page 62
62VQT0P18
1Insert a card which includes audio files.
2Connect the remote controller and the stereo
earphones.
You cannot listen to the audio on this unit without the use of
earphones.
3Slide the Power Switch to [ON].
– The Power Lamp lights in red.
Slide the Record/Playback Mode
Switch to the playback mode [ ].
4Press the [MODE] button and then
select [Audio] with the Jog Ball.
1Remote Controller (supplied)
2Stereo Earphones (supplied)
1 2
AudioEXIT
Playing Music (continued)
VQT0P18Eng.book 62...")
![Page 63
63VQT0P18
5Press the [MENU] button and then
select [List] with the Jog Ball.
When you did not select music from [List], the
music will be selected and played from the files
displayed.
6Roll the Jog Ball up or down to select
the desired music file.
7Play music.
If you do not operate this unit for about 10 seconds after you start
playback, the LCD Monitor will turn off to save power. (The Card
Access Lamp blinks during playback.) If you want to turn the LCD
Monitor on again, press the [MENU]...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-62.png "Page 63
63VQT0P18
5Press the [MENU] button and then
select [List] with the Jog Ball.
When you did not select music from [List], the
music will be selected and played from the files
displayed.
6Roll the Jog Ball up or down to select
the desired music file.
7Play music.
If you do not operate this unit for about 10 seconds after you start
playback, the LCD Monitor will turn off to save power. (The Card
Access Lamp blinks during playback.) If you want to turn the LCD
Monitor on again, press the [MENU]...")
![Page 64
64VQT0P18
∫When you switch the sound quality
Press the [EQ] button on the remote controller. The sound quality is switched every time you press the [EQ] button as
below.
The sound quality cannot be switched when the menu screen or the
6 pictures multi playback screen is displayed.
∫To prevent operation mistakes on this unit
Hold the [MODE] button on this unit for about 2 or more seconds. The operations with the buttons on this unit are disabled (except the
Power Switch and Record/Playback Mode...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-63.png "Page 64
64VQT0P18
∫When you switch the sound quality
Press the [EQ] button on the remote controller. The sound quality is switched every time you press the [EQ] button as
below.
The sound quality cannot be switched when the menu screen or the
6 pictures multi playback screen is displayed.
∫To prevent operation mistakes on this unit
Hold the [MODE] button on this unit for about 2 or more seconds. The operations with the buttons on this unit are disabled (except the
Power Switch and Record/Playback Mode...")
![Page 65
65VQT0P18
1Press the [MENU] button and then
select [Playlist] with the Jog
Ball.
– When you select the item listed on the top, all
of the recorded files are played.
1Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Selecting Playlists
You can select and play the playlist set in SD-Jukebox.
Playlist
EXITMENU
Playing Repeatedly (Repeat Playback)
Repeat
l
OFFStops playback after the last file
is played.
Repeat oneRepeats the file being played.
Repeat allRepeats playing all files...](http://img.usermanuals.tech/thumb/58/66043/w64_sv-as3_en_om_d-64.png "Page 65
65VQT0P18
1Press the [MENU] button and then
select [Playlist] with the Jog
Ball.
– When you select the item listed on the top, all
of the recorded files are played.
1Press the [MENU] button and then set the item with the
Jog Ball. (P20)
Selecting Playlists
You can select and play the playlist set in SD-Jukebox.
Playlist
EXITMENU
Playing Repeatedly (Repeat Playback)
Repeat
l
OFFStops playback after the last file
is played.
Repeat oneRepeats the file being played.
Repeat allRepeats playing all files...")
61VQT0P18 Files recorded onto a card with SD-Jukebox can be played on this unit. (You may not be able to play music depending on the file.) ≥Audio file formats playable on this unit MPEG2-AAC WMA MP3 Playing Music 1 Install SD-Jukebox from the supplied CD-ROM to the PC. For details of the method to record music, refer to the operating instructions of SD-Jukebox (PDF file). Record audio files from a music CD to the PC. Connect this unit to the PC. 1 USB cable (supplied) Be sure to insert a card into this unit and connect this unit with the PC to record audio files. If you record audio files onto a card inser ted in the card slot of the PC or use an USB Reader Writer etc. for recording, the recorded audio files may not be played back on this unit. Record the audio files onto the card by using SD-Jukebox. Audio file Playing Music VQT0P18Eng.book 61 ページ ２００５年１月１２日 水曜日 午前９時１１分
62VQT0P18 1Insert a card which includes audio files. 2Connect the remote controller and the stereo earphones. You cannot listen to the audio on this unit without the use of earphones. 3Slide the Power Switch to [ON]. – The Power Lamp lights in red. Slide the Record/Playback Mode Switch to the playback mode [ ]. 4Press the [MODE] button and then select [Audio] with the Jog Ball. 1Remote Controller (supplied) 2Stereo Earphones (supplied) 1 2 AudioEXIT Playing Music (continued) VQT0P18Eng.book 62 ページ ２００５年１月１２日 水曜日 午前９時１１分
63VQT0P18 5Press the [MENU] button and then select [List] with the Jog Ball. When you did not select music from [List], the music will be selected and played from the files displayed. 6Roll the Jog Ball up or down to select the desired music file. 7Play music. If you do not operate this unit for about 10 seconds after you start playback, the LCD Monitor will turn off to save power. (The Card Access Lamp blinks during playback.) If you want to turn the LCD Monitor on again, press the [MENU] button on this unit. The title and the artist name may not be displayed on this unit. List EXITMENU Remote ControllerThis Unit Playback/StopPress 1/∫.Press the Jog Ball. IndexTa p : or 9.Roll the Jog Ball right or left. (This operation is disabled during playback.) Fast-forward/ Fast-rewindHold : or 9.— Vo l u m ei: Turns up the volume. j: Turns down the volume.Press the Volume button. VQT0P18Eng.book 63 ページ ２００５年１月１２日 水曜日 午前９時１１分
64VQT0P18 ∫When you switch the sound quality Press the [EQ] button on the remote controller. The sound quality is switched every time you press the [EQ] button as below. The sound quality cannot be switched when the menu screen or the 6 pictures multi playback screen is displayed. ∫To prevent operation mistakes on this unit Hold the [MODE] button on this unit for about 2 or more seconds. The operations with the buttons on this unit are disabled (except the Power Switch and Record/Playback Mode Switch) while [HOLD] is displayed. When you hold the [MODE] button for 2 or more seconds, the button operations are enabled. When you operate the Power Switch or the Record/Playback Mode Switch, the button operations are enabled. ≥Music files cannot be recorded or deleted on this unit.≥When multiple pictures are associated with a music file by SD-Jukebox, only the picture associated as the first picture will be displayed. (The picture may not be displayed depending on the picture.) ≥If the playback of an audio file with associated pictures is started while the LCD Monitor is turned off, the associated pictures will not be displayed even if you turn the LCD Monitor on during playback. These pictures will be displayed when you stop playback. ≥When you format a card, all the data (files) in the card including music files will be deleted. NORMAL (Normal sound) l S-XBS1 (Heavy and low sound) l S-XBS2 (Sound heavier and lower than S-XBS1) l TRAIN (Prevents leakage of sound) Playing Music (continued) VQT0P18Eng.book 64 ページ ２００５年１月１２日 水曜日 午前９時１１分
65VQT0P18 1Press the [MENU] button and then select [Playlist] with the Jog Ball. – When you select the item listed on the top, all of the recorded files are played. 1Press the [MENU] button and then set the item with the Jog Ball. (P20) Selecting Playlists You can select and play the playlist set in SD-Jukebox. Playlist EXITMENU Playing Repeatedly (Repeat Playback) Repeat l OFFStops playback after the last file is played. Repeat oneRepeats the file being played. Repeat allRepeats playing all files (or all files in the playlist). VQT0P18Eng.book 65 ページ ２００５年１月１２日 水曜日 午前９時１１分
66VQT0P18 ≥SD Viewer and SD-Jukebox are not compatible with Macintosh. ∫Operating environment for USB connection ∫Operating environment of the software Operating Environment of the Software WindowsMacintosh 98SE Me 2000 XP Mac OS 9Mac OS X Is the installation of the USB driver needed?OS standard driver is available. Is SD Viewer available?Available Not available Is SD-Jukebox available?Not available Available Not available PCIBM PC/AT compatible personal computer preinstalled with Microsoft Windows 98 Second Edition/Millennium Edition/ 2000 Professional/XP Home Edition/XP Professional Macintosh (Mac OS 9/Mac OS X) SD Viewer Version 3.4E for D-snap (SD Viewer)SD-Jukebox Version5.0Light Edition (SD-Jukebox) PCIBM PC/AT compatible personal computer OSPC preinstalled with Microsoft Windows 98 Second Edition/Millennium Edition/2000 Professional/ XP Home Edition/XP Professional PC preinstalled with Microsoft Windows 2000 (Professional Service Pack 2, 3 or 4)/XP (Home Edition/Professional or Service Pack 1, 2 suppor ted) CPU 98SE MeIntel Pent ium III 450 MHz or higher/Celeron 400 MHz or higher (including compatible CPU)— 2000 XPIntel Pent ium III 500 MHz or higher NeededNot needed Connecting to PC VQT0P18Eng.book 66 ページ ２００５年１月１２日 水曜日 午前９時１１分
67VQT0P18 SD Viewer Version 3.4E for D-snap (SD Viewer)SD-Jukebox Version5.0Light Edition (SD-Jukebox) RAM 98SE Me64 MB (recommended: 128 MB) or more— 2000 XP128 MB (recommended: 256 MB) or more256 MB or more Free hard disk space400 MB or more 100 MB or more DisplayHigh Color (16 bit) or more (True Color (24 bit) or more recommended.) Desktop resolution of 800k600 or more (1024k768 pixels or more recommended.) VRAM 8 MB or more (16 MB or more recommended.)— SoundWindows compatible sound device DriveCD-ROM drive— Used for installationCD-ROM drive—A CD-ROM drive capable of digital recording is required. Four- speed or higher is recommended. (Recording cannot work properly with CD-ROM drives connected through an IEEE1394 connection.) InterfaceUSB port Necessary softwareDirectX 8.1 or later Windows Media Player 6.4 or later Internet Explorer 5.5 or laterInternet Explorer 5.01 or later Other requirements—If you are using the CDDB function, then an Internet connection is also required. VQT0P18Eng.book 67 ページ ２００５年１月１２日 水曜日 午前９時１１分
68VQT0P18 ≥Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc. of the U.S. ≥IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U.S. ≥Intel, Pentium and Celeron are trademarks or registered trademarks of Intel Corporation in the United States and/or other countries. ≥Even if the system requirements are fulfilled, some personal computers can not be used. ≥Operation is not guaranteed when used on Windows OSs except Operating environment in the chart on P66. ≥Operation on an upgraded OS is not guaranteed. ≥Multi-boot environment is not supported. ≥This software cannot be used on 64-bit OS. ≥When your OS is Windows 2000/XP, install the USB driver after logging in with the user name authorized as the system administrator (Administrator). ≥This system requirements guarantee if the application run alone. It is not guaranteed in the case that any other application or resident application runs. ≥This software may not run properly on user-built computers. ≥When 2 or more USB devices are connected to one PC, or when devices are connected through an USB hub or by using an USB extension cable, the operation is not guaranteed. ∫Cautions for USB driver ≥This software is not compatible with a multi-CPU environment. ∫Cautions for SD-Jukebox ≥This software cannot play and record music CDs that does not have a “ ” mark on the disk label. Connecting to PC (continued) VQT0P18Eng.book 68 ページ ２００５年１月１２日 水曜日 午前９時１１分
69VQT0P18 ≥Depending on your computer system, you may experience problems such as being unable to record or use recorded music data. Please note that Panasonic is in no way liable for any music data you lose, or for any other direct or indirect damages. ≥When you use the CDDB function, the environment for the Internet access is needed. ≥Do not connect this unit to the PC until the installation is completed. ≥Exit all the other application software before inserting the CD-ROM. 1Start the PC and insert the CD-ROM (supplied) . – The setup menu is automatically started. (When it does not start, double-click [autorun.exe] in the CD-ROM.) 2Click the name of the software you want to install in the setup menu. If you stop the installation by pressing [Cancel], the software may not be properly operated. Before Connecting to a PC for the First Time (Installation) When your OS is Windows 98SE or Me, the installation of the USB driver is required before connecting this unit to a PC. ∫When you install SD Viewer ≥When the message that informs the absence of DirectX 8.1 or later appears, install DirectX from the setup menu prior to the installation of the software. VQT0P18Eng.book 69 ページ ２００５年１月１２日 水曜日 午前９時１１分
70VQT0P18 1Click [USB Driver]. 2Click [Finish]. To enable the driver, restar t the PC. 1Click [SD Viewer 3.4E]. 2Click [Next]. Installing the USB Driver When your OS is Windows 2000 or XP, the installation of the USB driver is not required because the OS standard driver is used. Installing SD Viewer Connecting to PC (continued) VQT0P18Eng.book 70 ページ ２００５年１月１２日 水曜日 午前９時１１分