Panasonic Sv As3 Operating Instructions Manual

							51VQT0P18
≥You can cancel the zoom by opening the menu screen.
≥The more the picture is enlarged, the more the picture quality is 
deteriorated.
≥The zoom may not be done on a picture recorded with other 
equipment.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the 
Jog Ball. (P20)
3Select the desired picture and then 
press the Jog Ball.
–[¿] appears on the LCD Monitor and the 
picture is registered.
 Press the Jog Ball again to cancel.
 Press the [MENU] button to close the menu.
∫When you play files registered as “Favorite” only
Select [Play] in Step 2 and then press the Jog Ball.
≥Roll the Jog Ball right or left to select the picture.
≥Press the [MENU] button to stop the Mark play function.
∫When you cancel registration
Select a registered file in Step 3 and then press the Jog Ball.
Registering Still Pictures as “Favorite”
Only pictures registered as a “Favorite” can be displayed or watched 
on the slide show (P54).
MarklSelect/Unselect
VQT0P18Eng.book  51 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							52VQT0P18
∫When you cancel registration on all files
Select [Unselect all] in Step 2, select [Yes] on the confirmation screen 
and then press the Jog Ball. All pictures registered are canceled.
≥Up to 999 pictures can be registered as a “Favorite”.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the 
Jog Ball. (P20)
 If you have created a slide show already, a confirmation message 
appears. If you select [Yes], you can delete a slide show previously 
created and then create a new one. If you select [No], you can change 
an existing slide show.
3Roll the Jog Ball left or right to select 
the pictures to create a slide show 
and then press the Jog Ball.
– [ ] appears on the LCD Monitor.
 Press the Jog Ball again to cancel.
 You can also set other pictures by repeating 
this operation.
Creating a Slide Show with Audio
You can create a slide show with the audio file in the card added as a 
BGM (Background Music).
Slide showlMake slide show
Playback (continued)
VQT0P18Eng.book  52 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							53VQT0P18
4Press the [MENU] button.
 If no audio file is recorded in the card, a slide 
show without audio is created.
5(When there are audio files in the 
card)
Select [Yes] or [No] on the 
confirmation screen and then press 
the Jog Ball.
 If you select [No], a slide show without audio is 
created.
6(When you select [Yes] in Step 5)
Select the audio file you want to play 
during the slide show and then press 
the Jog Ball.
 A slide show with audio is created.
≥The only files attachable as BGM (Background Music) is audio files 
that can be played on this unit. (P61)
≥Up to 36 pictures can be set in a slide show.
≥During the playback in a slide show with audio, the picture quality is 
deteriorated.
DO YOU  NEED 
BACKGROUND MUSIC?
Ye s N o
VQT0P18Eng.book  53 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							54VQT0P18
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the 
Jog Ball. (P20)
– A slide show starts.
 Press the Jog Ball to stop the playback halfway.
≥You can set the pictures which will be played as a slide show in 
SD Viewer. On this unit, pictures cannot be played in the interval set 
in SD Viewer.
≥You can adjust the volume with the Volume button on the remote 
controller during the slide show (with audio). (The volume control 
screen does not appear.)
≥It may take time to display the slide show (with audio) since the 
opening screen appears during a preparation for playback. However, 
this is not a malfunction.
Playing Still Pictures on the Slide Show
Still pictures are automatically played in sequence. This function is 
suitable for making a story with still pictures.
Slide showlPlay slide showl
Slide show 
(with audio)Plays slide shows with audio (P52) created 
on this unit.
Slide show 
(all pictures)Plays all pictures (in the order of the file 
number).
SD Slide 
showPlays slide shows set on the supplied 
software SD Viewer.
Slide show 
(¿ mark)Plays slide show pictures registered as 
“Favorite” (P51).
Playback (continued)
VQT0P18Eng.book  54 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							55VQT0P18
≥When you want to listen to the audio being played, connect the 
remote controller and the stereo earphones (supplied). (This unit is 
not equipped with a speaker.)
 
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the 
Jog Ball. (P20)
 Be sure to set the item above before connecting this unit with the 
printer.
3Connect this unit to the power plug with 
the AC adaptor.
 Be sure to insert the charged battery and the 
card into this unit.
Connect this unit and the printer with 
the supplied USB cable 1.
– [ACCESSING PICTBRIDGE/PTP] indication 
appears.
 If the message [ACCESSING PC] is displayed, 
disconnect the USB cable once and confirm 
the setting in Step 2.
Printing Pictures Directly by Connecting to a Printer 
(PictBridge)
You can print still pictures played on this unit from a printer 
supporting PictBridge connected to this unit with the USB cable 
(supplied). (Turn the printer on beforehand.)
SetuplConnection
(USB)lPictBridge
1
VQT0P18Eng.book  55 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							56VQT0P18
4Select a picture and then press the 
Jog Ball.
5Check the setting, select [Print start] 
and then press the Jog Ball.
– When printing is finished, the message 
[PRINTING COMPLETED] appears.
 To cancel printing, press the [MENU] button.
∫To change the print setting
When you select [Change settings] in Step 5, you can change 3 items 
described in the table below. Select and set the desired item with the 
Jog Ball.
 The items which are not supported by the printer will not be displayed.
 When [PrinterSetting] is selected, pictures are printed out in the paper 
size set on the printer.
 If you press the [MENU] button during the setting, the screen returns to 
the picture selection screen (Step 4). 
Change
Print start COUNT 
Size
Date
´«
´PrinterSetting ´OFF 
:§:À:º:Ë:™:É:À:»:¾:¼
Print startPrint starts.
Change 
settingsChanges the print 
setting.
Start
Change
COUNTSizeDate
1–99L (3.5a5z)Post Card OFF
2L (5a7z)A4 ON
PrinterSetting
Playback (continued)
VQT0P18Eng.book  56 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							57VQT0P18
≥Do not use any other USB cables except the supplied one.
≥While printing or canceling the print, do not disconnect the USB 
cable.
≥Do not replace the card while connecting with the printer. (Ensure 
that the printer is not printing anything and then disconnect the USB 
cable before replacing the card.)
≥Pictures recorded on other devices or altered on a PC may not be 
printed.
≥If you unplug the AC adaptor while connecting with the printer, 
operations of buttons on this unit will be disabled.
≥If the following messages appear during printing, check the printer 
and then select [Print resume] to restart printing or select [Print 
cancel] to stop printing. (If an irretrievable error takes place, only 
[Print cancel] will appear.) (Refer to the operating instructions of the 
printer you use.)
≥When the error message of the printer is displayed before printing 
begins, you cannot operate this unit until you turn this unit off and the 
printer recovers.
Messages displayed
NO PAPER 
CHECK PRINTERJAMMED PAPER 
CHECK PRINTERPRINTER ERROR 
CHECK PRINTER
NO INK 
CHECK PRINTERPRINTER BUSY 
CHECK PRINTER
VQT0P18Eng.book  57 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							58VQT0P18
≥Error messages also appear in the following cases. Check the 
message before connecting.
1Set the mode to [Picture] mode. (P43)
2Press the [MENU] button and then set the item with the 
Jog Ball. (P20)
Messages displayedConditions
USE BOTH AC 
ADAPTOR AND 
BATTERYWhen the battery is not inserted
When the AC adaptor is not connected
When the AC adaptor is unplugged during 
connection
SET TO PLAY MODEWhen connecting in the recording mode
NO CARDWhen the card is not inserted
CHECK CARDWhen MultiMediaCard is inserted
TARGET FILE DOES 
NOT EXISTWhen there is no picture to be selected in the 
card
Setting Still Pictures to be Printed and the Number of 
Prints (DPOF Print)
DPOF is a system that allows the user to select which pictures are to 
be printed on compatible photo printers.
DPOF 
printl
Single printSets the number of prints 
for each file independently.
All printsSets the same number of 
prints for all files.
Playback (continued)
VQT0P18Eng.book  58 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							59VQT0P18
3Roll the Jog Ball left or right to select 
the desired file.
(Only when [Single print] is selected)
4Roll the Jog Ball up or down to select 
the number of prints and then press 
the Jog Ball.
 The number of prints can be set from 1 to 99.
 If you want to set DPOF setting on other 
pictures when [Single print] is selected, repeat 
Steps 3–4.
5Press the [MENU] button.
– The setting is completed.
∫When you confirm pictures with DPOF setting
Select [Check DPOF] in Step 2 and then press the Jog Ball. Roll the Jog Ball right or left to confirm the picture. Press the [MENU] 
button to stop the confirmation.
COUNT0
EXITMENU SEL ENTER
VQT0P18Eng.book  59 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							60VQT0P18
∫When you print the date in DPOF printing
Select [Print date]>[ON] in Step 2, select [Yes] on the confirmation 
screen and then press the Jog Ball.
 Date printing is set to all the pictures that DPOF setting is set. (You 
cannot set date printing for each picture.)
 You cannot print the date on the pictures if the recording date is not 
recorded.
 The date may be cut or not be displayed depending on the printer.
∫When you cancel DPOF setting
Set the number of prints to [0] in Step 4.
≥If the DPOF setting is set, you do not need to indicate which or how 
many pictures are to be printed. It is also convenient when you print 
pictures with a printer supporting SD Memory Card because you do 
not need settings on the printer.
≥If a file does not conform to the DCF standard (P91), the DPOF 
setting cannot be set on the file.
≥When using the DPOF feature, this unit will overwrite any previous 
DPOF settings made by other equipment.
≥When the message [CARD FULL] is displayed, delete unnecessary 
files and set DPOF setting again.
≥It takes some time to set DPOF setting on many files at the same 
time. Use a fully charged battery.
≥DPOF setting may not be set on a picture recorded with other 
equipment.
≥DPOF is the abbreviation for “Digital Print Order Format”.
Playback (continued)
VQT0P18Eng.book  60 ページ  ２００５年１月１２日　水曜日　午前９時１１分