Panasonic Sv As3 Operating Instructions Manual

							21VQT0P18
2Roll the Jog Ball 2 to select the sub-menu, and then 
press the Jog Ball to set.
– The sub-menu screen appears.
3Roll the Jog Ball to select the desired item, and then 
press the Jog Ball to set.
– The setting is changed and the menu screen disappears.
 If you have other items to select, repeat Step 3.
≥To stop the operation, press the [MENU] button.
≥If the Jog Ball is left without any operation for about 30 seconds, the 
unit exits the menu automatically.
≥When you press the [MENU] button for about 1 second, the shortcut 
menu appears. (P26)
Flash
EXIT MENU
Auto
EXIT MENU2
Flash offEXIT MENU
VQT0P18Eng.book  21 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							22VQT0P18
1Press the [MENU] button and then set the desired 
items with the Jog Ball. (P20)
∫Setting the operation sound
∫Setting the Jog Ball
≥The response speed of the Jog Ball is not changed when you select 
pictures and move between thumbnails or list display in the playback 
mode.
Setup Menu
You can change the settings on this unit in the menu.
SetuplSelect the following items for the settings.
Vo l u m el
Beep ONTurns on the operation 
sound.
Beep OFFTurns off the operation 
sound.
Main volumeAdjusts the volume of the 
stereo earphones.
Sensitivity 
(Jog Ball)l
NormalThis is normal response 
speed of the Jog Ball.
FastThe response of the Jog 
Ball becomes fast.
SlowThe response of the Jog 
Ball becomes slow.
Preparation (continued)
VQT0P18Eng.book  22 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							23VQT0P18
∫Setting the USB connection
∫Setting the LCD Monitor
∫Setting the power
≥When this unit is automatically turned off and you want to turn it on 
again, slide the Power Switch to [OFF] and slide it to [ON].
≥[Auto power off] does not work when connecting in USB connection 
mode, recording/playing MPEG4 images, playing the slide show or 
music, or recording/playing the [Voice] files.
Connection
(USB)l
Connection
(PC)Connects to the PC. 
(P73)
PictBridgeConnects to the printer. 
(P55)
Display setupl
Icon displayDisplays or hides the 
icon display.
BrightnessAdjusts the brightness of 
the LCD Monitor.
Auto power offl
5min power off
Turns off this unit 
automatically without any 
operation for about 
5 minutes.
CancelWill not turn this unit off 
automatically.
VQT0P18Eng.book  23 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							24VQT0P18
∫Setting the clock
∫Formatting (initializing) the card
∫Restoring the settings
1Press the [MENU] button and then set the item with the 
Jog Ball. (P20)
Clock setSets the date and time.
FormatIf the card is formatted, all the data (including 
protected files) cannot be recovered. Check the 
data before formatting.
Reset settingsResets to the initial settings except the clock 
setting.
Setting the Clock
The clock is not set at the time of purchase. Set the clock on the 
clock setting screen which appears at the time you turn this unit on.
(If you do not set the clock here, the clock is automatically set to 
January 1st, 2000 12:00AM.)
SetuplClock set
Preparation (continued)
VQT0P18Eng.book  24 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							25VQT0P18
2Adjust the date and time with the Jog Ball.
 The highlight moves between the items (Month, Day, Year, Hour, 
Minute) every time you press the Jog Ball. When you roll the Jog Ball up 
or down, the value is changed. (You can set the year from 2000 to 2099.)
 The time is displayed in 12 hour system.
3Press the [MENU] button after adjusting the date and 
time.
– The setup screen disappears.
≥When the fully charged battery is inserted in the SD Multi 
Camera for 1 hour or more, the clock setting is stored in the SD 
Multi Camera for about 10 hours even after the battery is 
removed. (The time to keep the clock setting depends on how long 
the battery is inserted. It is stored for about 3 months at a maximum. 
If a battery which is not fully charged is inserted, the time may 
become shorter.) The clock setting is canceled if more time has 
passed without the battery inserted. In this case, set the clock again.
EXITMENUSEL ENTER
FebAM
EXIT MENUSEL ENTER
VQT0P18Eng.book  25 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							26VQT0P18
1Press the [MENU] button for 1 or more seconds and 
then set the item with the Jog Ball.
 Roll the Jog Ball up/down/left/right to select the item and then press 
the Jog Ball to set the item.
 Press the [MENU] button to exit the shortcut menu.
Shortcut Menu
400400
AUTOAUTO01010OFFOFFAUTOAUTO1001002002002
1
400AUTO02
2016016OFFOFF
1600160012801280
HDTVHDTV
640640
A AWB
234 5
678910
11 13 1412
ALLALL
OFFOFFOFFOFF
SDSD
0
OFFOFFNORMALNORMALS-XBS1-XBS1S-XBS2-XBS2TRAINTRAIN
15 1716
OFFOFF
1 Flash (P36)
2 Night mode (P40)
3 White balance (P39)
4 Picture quality (P33)
5 Picture size (P33)
6 Exposure compensation 
(P41)
7 ISO sensitivity (P42)
8 Self-timer (P38)9 Slide show (P54)
10 Repeat playback (P47)
11 File delete (P47)
12 Lock setting (P49)
13 DPOF print (P58)
14 Mark setting (P51)
15 Playlist (P65)
16 Sound quality (P64)
17 Repeat playback (P65)
 
Preparation (continued)
VQT0P18Eng.book  26 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							27VQT0P18
∫How to hold the SD Multi Camera 
≥Put your arm on the side of your body.
≥Fix the SD Multi Camera with your right hand and 
put your left hand on the SD Multi Camera.
≥The shutter speed can be automatically adjusted. 
The shutter speed becomes slow in dark places 
such as shaded areas or in a room. Therefore, be 
careful not to shake the SD Multi Camera and press 
the shutter button gently. When you take pictures of 
the subjects in quick motion, the picture may be 
blurred or the image of the subject may persist.
≥You can reduce camera shakes by taking pictures with the self-timer 
or the remote controller.
≥If the SD Memory Card has been formatted by a PC or other 
equipment, it may not record properly. Format the card with this unit 
before use.
Before Recording
Recording
VQT0P18Eng.book  27 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							28VQT0P18
∫Selecting the desired recording mode
1Slide the Power Switch to [ON].
– The Power Lamp lights in red.
Slide the Record/Playback Mode 
Switch to the recording mode [ ].
2Press the [MODE] button and then 
select the desired mode with the Jog 
Ball.
 Refer to the table below to select the mode.
Recording
This unit can focus on a subject at a distance of about 2.0 ft. (60 cm) 
or more. 
Picture
EXIT
Recording modeRecommendable situationAudio
Picture
 (Still picture recording)When you want to capture 
still imagesCannot be 
recorded
MPEG4
 (Motion image recording)When you want to record 
and watch motion images
Recorded 
from the 
microphone 
on this unit
Vo i c e
(Audio recording)When you want to listen to 
sounds for studying 
languages or rehearsing a 
speech
Recording (continued)
VQT0P18Eng.book  28 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							29VQT0P18
∫When selecting [Picture]
1Tap the Shutter button for recording.
 You can also use the Shutter button on the 
remote controller.
 Recorded pictures are displayed for a few 
seconds after capture.
∫
When selecting [MPEG4] or [Voice]
1Tap the Shutter button for recording.
–[¥] appears during recording.
 You can also use the Shutter button on the 
remote controller.
2Press the Shutter button to stop 
recording.
–[∑] appears while recording is stopped.
 If the memory of the card becomes full during 
the recording, the recording is stopped 
automatically.
VQT0P18Eng.book  29 ページ  ２００５年１月１２日　水曜日　午前９時１１分 
						

							30VQT0P18
≥Do not cover the microphone with your finger or 
other objects during recording. Be careful not to 
touch the Jog Ball or any other buttons. Noises 
may be recorded.
∫When recording in [Picture] mode
≥If you select 
[Advanced setup] >   [Reset file No.] on the 
menu setting, you can reset the file number in recording to a card to 
0001. (The folder number is increased by 1.)
∫When recording in [MPEG4] mode
≥If the remaining recording time becomes less than 1 minute, 
“R 0h00m” is displayed in red.
≥You cannot use the flash, night mode and self-timer.≥The ISO sensitivity cannot be adjusted.≥The audio is recorded in monaural.
≥If you use a card with a low writing speed, recording in [MPEG4] 
mode may be stopped. (We recommend using Panasonic SD 
Memory Card.)
≥Before and after the recording, the click sound may occur around the 
Lens or the brightness of the screen may change depending on the 
ambient lighting. However, it is not a malfunction.
∫When recording in [Voice] mode
≥The LCD Monitor turns off in about 10 seconds after the recording 
has started. It turns on again when you press the [MENU] button. (It 
also turns on when the recording is stopped.)
≥The audio is recorded in monaural.≥The files that are recorded are automatically protected. (P49)
Recording (continued)
VQT0P18Eng.book  30 ページ  ２００５年１月１２日　水曜日　午前９時１１分