Panasonic Sdr S10 Operating Instructions Manual

							31VQT1D97
Setup
Inserting/removing 
an SD card
Be sure to set the mode dial to OFF 
before inserting/removing an SD card.
1Set the mode dial to OFF.
≥Check that the status indicator has 
gone off.
2Slide the card/battery door 
lock in the direction of the 
arrow and then open the card/
battery door.
≥When the card/battery door does not 
open, place your finger on the [ ] part 
and open the card/battery door.
3Insert/remove the SD card 
into/from the card slot.
≥When inserting an SD card, place the 
label side A upwards and press it 
straight in as far as it goes.
≥When removing the SD card, press the 
center of the SD card and then pull it 
straight out.
4Close the card/battery door 
and then slide the card/battery 
door lock in the direction of 
the arrow.
≥If the card/battery door cannot be 
completely closed, remove the card 
and then insert it again. If the SD card is inserted or removed 
while the power is on, this unit may 
malfunction or the data recorded on 
the SD card may be lost.
A
VQT1D97(ENG).book  31 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							32VQT1D97
Setup
∫Card access lamp
≥When this unit accesses the SD card 
(reading, recording, playback, erasing, 
etc.), the access lamp lights up.
≥If the following operations are 
performed when the access lamp is lit, 
then the SD card or the recorded data 
may be damaged or this unit may 
malfunction.
sOpening the card/battery door
sRemoving the SD card
sOperating the mode dial
sRemoving the battery or 
disconnecting the AC adaptor
How to use the 
cursor button
This unit has a cursor button for 
selecting functions, performing 
operations, etc..
Operations on the menu screen and 
selection of files on the thumbnail view 
screen, etc.
Press the cursor button up, 
down, left or right to select an 
item or scene and then press the 
cursor button in the center to set 
it.
≥Menu screen operations (l38)
Basic operations
1Up
2Down
3Left
4Right
5Press to select the item
1
34
2
5
VQT1D97(ENG).book  32 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							33VQT1D97
Setup
¬Rotate the mode dial to select 
 or  .
1Press the cursor button in the 
center and the icons will be 
displayed on the screen.
≥The indication disappears when 
the cursor button in the center is 
pressed again.
≥The indication changes each time 
the cursor button is pressed down.
2Press the cursor button up, 
left or right to select an item.¬Rotate the mode dial to select 
 or  .
1Press the cursor button up, 
down, left or right to select the 
scene to be played back and 
then press the cursor button 
in the center.
The selected scene is played back 
on the full screen.
≥The operation icon is automatically 
displayed on the screen.
2Press the cursor button up, 
down, left or right to operate.
≥The operation icon appears or 
disappears each time the cursor button 
in the center is pressed.
Operations during 
recording
1/21/2 NEXTNEXT1/2 NEXT
Operations during playback
VQT1D97(ENG).book  33 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							Setup
34VQT1D97
About auto mode and manual mode (l44)
 Video recording mode
≥The shaded operation icons are not displayed while recording. 
About the operation icons displayed in each mode
IconDirectionFunctionPage
(1/2)3Backlight compensation 51
2Fade 52
1Help mode37
(2/2)
3MagicPix53
2Soft skin mode53
(3/3)
When the 
[MANUAL AF/MF] 
button is pressed 
to set to manual 
mode.3White balance 60
2Iris or gain value 62
1Shutter speed 62
(4/4)
When the 
[MANUAL AF/MF] 
button is pressed 
again to set to 
manual focus 
mode.21Manual focus adjustment 59
1/21/2 NEXTNEXT1/2 NEXT2/22/2 NEXTNEXT2/2 NEXT3/33/3 NEXTNEXT3/3 NEXT4/44/4 NEXTNEXT4/4 NEXT
VQT1D97(ENG).book  34 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							Setup
35VQT1D97
 Video playback mode
IconDirectionFunctionPage
1/;3Playback/pause 64
∫4Stop playback and show thumbnails 64
:
2Skip 64
6Rewind 65
2;
Reverse slow/frame playback (during pause)65, 66
9
1Skip 64
5Fast forward 65
;1
Forward slow/frame playback (during pause)65, 66
VQT1D97(ENG).book  35 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							Setup
36VQT1D97
 Picture recording mode
 Picture playback mode
IconDirectionFunctionPage
(1/2)3Backlight compensation 51
Ø2Self timer 54
1Help mode 37
(2/2)2Soft skin mode 53
(3/3)
When the 
[MANUAL AF/MF] 
button is pressed 
to set to manual 
mode.3White balance 60
2Iris or gain value 62
1Shutter speed 62
(4/4)
When the 
[MANUAL AF/MF] 
button is pressed 
again to set to 
manual focus 
mode.21Manual focus adjustment 59
IconDirectionFunctionPage
1/;3Slide show start/pause 68
∫4Stop playback and show thumbnails 68
E2Playback previous picture (during pause) 68
D1Playback next picture (during pause) 68
1/21/2 NEXTNEXT1/2 NEXT2/22/2 NEXTNEXT2/2 NEXT3/33/3 NEXTNEXT3/3 NEXT4/44/4 NEXTNEXT4/4 NEXT
VQT1D97(ENG).book  36 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							37VQT1D97
Setup
∫Help mode
The help mode explains the operation 
icons that are displayed when the unit is 
set to AUTO in video/picture recording 
mode.
≥Rotate the mode dial to select   or 
.
1 Press the cursor button in the 
center to display the icon during 
the recording pause.
2 Press the cursor button right to 
select [ ].
3 Press the cursor button up, left or 
right to select the desired icon.
An explanation of the selected icon 
is displayed on the screen.
≥The indication changes each time 
the cursor button is pressed down.
To exit the help mode
Press the MENU button or select [EXIT].
≥When the help mode is used, functions 
cannot be set.
≥When the help mode is used, motion 
pictures and still pictures cannot be 
recorded.
1/3 NEXT1/21/2 NEXTNEXT1/2 NEXT
1/21/2 NEXTNEXT1/2 NEXT
VQT1D97(ENG).book  37 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							38VQT1D97
Setup
Switching the 
language
You can switch the language on the 
screen display or the menu screen.
1Press the MENU button, then 
select [LANGUAGE] and then 
press the cursor button in the 
center.
2Select [English] and then 
press the cursor button in the 
center.
Using the menu 
screen
Refer to “Menu list” (l95) for 
information about the menus.
1While stopped, press the 
MENU button.
The menu displayed differs 
depending on the position of the 
mode dial.
≥Do not switch the mode dial when 
the menu is displayed.
2Press the cursor button up or 
down in order to select the 
desired top menu.
3Press the cursor button right 
or press the button in the 
center.
VQT1D97(ENG).book  38 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							39VQT1D97
Setup
4Press the cursor button up or 
down in order to select the 
submenu item.
5Press the cursor button right 
or press the cursor button in 
the center.
6Press the cursor button up or 
down in order to select the 
desired item.
7Press the cursor button in the 
center to enter the selection.
To get back to the previous 
screen
Press the cursor button left.
To exit the menu screen
Press the MENU button.
≥The menu screen does not appear 
during recording or playing. You 
cannot start other operations while the 
menu screen appears.
VQT1D97(ENG).book  39 ページ  ２００７年３月２０日　火曜日　午後５時３３分 
						

							40VQT1D97
Setup
Setting date and time
When the unit is turned on for the first 
time, a message asking you to set the 
date and time will appear.
≥Select [YES] and press the cursor 
button in the center. Perform steps 2 
and 3 below to set the date and time.
If the screen shows the incorrect date 
and time, then adjust it.
¬Rotate the mode dial to select 
 or  .
1Press the MENU button, then 
select [BASIC] # 
[CLOCK SET] # [YES] and 
then press the cursor button 
in the center.
2Press the cursor button left or 
right to select the item to be 
set. Then, press the button up 
or down to set the desired 
value.
≥The year will change as follows:
2000, 2001, ..., 2099, 2000, ...≥The 12-hour system is used to 
display the time.
3Press the cursor button in the 
center to enter the selection.
≥The clock function starts at 
[00] seconds when the cursor 
button in the center is pressed.
≥After pressing the MENU button to 
finish the setting, check the date 
and time display.
∫Changing the date and time 
display style
Press the MENU button, then select 
[SETUP] # [DATE/TIME] # desired 
display style and then press the 
cursor button in the center.
[DATE] [D/T]
[OFF]
DEC.15.2007 DEC.15.2007  3:30 PM
VQT1D97(ENG).book  40 ページ  ２００７年３月２０日　火曜日　午後５時３３分