Panasonic Rp Btgs10 Owners Manual

VQT5C48
11
11
ENGLISH
Button operation

You can control the Bluetooth® device using buttons on the headset.
 • Depending on Bluetooth® devices, some functions below do not work, or 
work differently via button operation of the headset.
(Operation example)
Play/Pause button
Play/Pause/Resume
 / 
Previous button/Next button Press
Press and holdDuring 
playbackDuring  pause
Return to the start of  current track Rewind 
Forward to the start of 
next trackFast 
forwardPlay/Pause
Right (R) Next
Previous...

VQT5C48
12
12
Making a phone call
With Bluetooth® enabled phones (cell phones or smartphones) that support the 
“HFP” or “HSP” Bluetooth® profile, you can use the headset for phone calls.
 • HFP (Hands-Free Pro file): 
In addition to the HSP function, an advanced communication feature is 
available.
 • HSP (Headset Profile): 
Hands-free phone calls are possible using the headset.
When answering an incoming callWhen making an outgoing call
1Connect the Bluetooth® enabled phone and headset (  P. 8)
2
Press...

VQT5C48
13
13
ENGLISH
Restoring to the factory settings
Useful functions
 
■Note • There may be instances when hands free operation needs to be set on the \
Bluetooth® enabled phone.
 • Depending on the Bluetooth® enabled phone, you may hear incoming and 
outgoing call ringtones of the phone from the headset.
 • If you cannot check the outgoing call, press and hold the Call button 
 on 
the headset for approximately 2 seconds and switch the device used for 
the call from the Bluetooth
® enabled phone to...

VQT5C48
14
14
Safety precautions
 
■Unit • Avoid using or placing this unit near sources of heat.
 • Do not operate this unit while driving or cycling.
 • Do not listen with this unit at high volume in places where you need to \
hear sounds from the surrounding environment for safety, such as at 
railroad crossings, platforms, roads and construction sites.
 
■Batteries • Do not peel off the covering on batteries and do not use the batteries if 
the covering has been peeled off.
 • Align the poles  ( and...

VQT5C48
15
15
ENGLISH
CAUTION • Danger of explosion if battery is incorrectly replaced. Replace only wit\
h the type recommended by the manufacturer.
 • When disposing of the batteries, please contact your local authorities  or dealer and ask for the correct method of disposal.
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADAThis device complies with Industry Canada licence-exempt RSS standard(s\
).Operation is subject to the following two conditions: 
(1) This device may not cause interference, and 
(2)...

VQT5C48
16
16
About Bluetooth®
Panasonic bears no responsibility for data and/or information that is 
compromised during a wireless transmission.
 
■Frequency band usedThis unit uses the 2.4 GHz frequency band.
 
■Certification of this unit • This unit conforms to frequency restrictions and has received 
certification based on frequency laws. Thus, a wireless permit is not 
necessary.
 • The actions below are punishable by law in some countries: – Taking apart/modifying the unit.
–  Removing...

VQT5C48
17
17
ENGLISH
Clean this unit with a dry and soft cloth. • Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed 
or the coating to come off.
This unit and adjustable band
If the unit and adjustable band become too dirty, wring a cloth moistened in 
water, wipe the dirt with it and clean with a dry cloth. USB charger
Clean the USB charger after disconnecting it from the computer.
Product service
1....

VQT5C48
18
18
Troubleshooting guide
Before requesting service, make the following checks. If you are in doub\
t 
about some of the check points, or if the remedies indicated in the char\
t do 
not solve the problem, refer to “Customer Services Directory (United\
 States 
and Puerto Rico)” on page 23 if you reside in the U.S.A. or Puerto R\
ico, or 
refer to “Product information” on page 17 if you reside in Canada.\
General
No operation • Remove the battery, and insert it again. If you still cannot...

VQT5C48
19
19
ENGLISH
Bluetooth® device connecting
The device cannot be connected • The unit’s pairing information may have been deleted from the Bluetooth® 
device. Pair them again if pairing information cannot be found. (  P. 8)
 • Delete the pairing information for this unit from the Bluetooth
® device, then 
pair them again. (  P. 8)
Sound and audio volume
No sound • Make sure that the unit and the Bluetooth® device are connected correctly.  
( P. 8)
 • Check if music is playing on the Bluetooth®...

VQT5C48
20
20
Specifications
 
Ù Bluetooth® section
Bluetooth® system specification Ver.3.0
Wireless equipment classification Class 2 (2.5 mW)
Frequency band 2.4 GHz band FH-SS
Supported profiles A2DP, AVRCP, HSP, HFP
Supported codec SBC, aptX
®
Operating distanceup to 10 m (33 ft.)
 
Ù Microphone section
Type Mono
 
Ù General
Power 
supply Rechargeable batteryDC 1.2 V (1 × Ni-MH rechargeable 
battery, AAA)
Dry-cell batteryDC 1.5 V (1 × LR03 battery, AAA)
Dimensions (W × H × D)
160 mm × 50 mm × 170...