Panasonic Rp Btgs10 Owners Manual

ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
VQT5C48
Owner’s Manual
Manuel d’utilisation
Instrucciones de funcionamiento Instruções de Operação
Bone Conduction Headset
Casque à conduction osseuse
Auriculares de conducción ósea
Fone de ouvido com condução óssea
Model No. 
N° de modèleRP-BTGS10
PP
If you have any questions contactIn the U.S.A. and Puerto Rico:
 http://www.panasonic.com/support
In Canada:
 www.panasonic.ca/english/support
Pour toute question, veuillez contacter www.panasonic.ca/french/support
Si...

VQT5C48
2
2
Dear customerThank you for purchasing this product.Please read these instructions carefully before using this product, and \
save this 
manual for future use.
Key Features
♦  You can listen to music and make hands-free phone calls by 
wirelessly connecting a Bluetooth® device.
♦   Water resistant specifications (IPX4) allow the headset to be used 
without worrying about rain or sweating 
during sports.
♦   Equipped with bone conduction 
speakers, the headset lets you hear 
sounds from both...

VQT5C48
3
3
ENGLISH
Table of 
contentsAccessories
Before use
Accessories ................................... 3(Important) About water resistance ... 4
Part names .................................... 5
Preparation
Charging ........................................ 6
Inserting a battery .......................... 7
Turning the power on/off ................ 7
Connecting a Bluetooth
® device .... 8
How to wear the headset ............... 9
Operation
Listening to music ........................ 10
Making a...

VQT5C48
4
4
(Important) About water resistance
 • This unit has water resistant specifications equivalent to IPX4 of IEC 60529.
(IPX4: Protected against splashing water)
 • Supplied USB charger and rechargeable battery are not water resistant.
 
■About the IPX4 (liquid ingress protection level against 
splashing water)
Water resistance is not always guaranteed under all conditions.
This unit is compatible to operate after splashing approximately 1.8 L 
(0.5 gallon)/minute room temperature tap water for...

VQT5C48
5
5
ENGLISH
Part names
Left (L)Right (R)
Outside
Inside
6
96
8810
713
5
234
8
7
1
12
11
6
1Battery lid2LED pattern switch 
button
 • Switches between the sports and normal modes. (  P. 13)
3Power button 4Pairing button 5Protrusion (Adjustable 
band attachment 
position) ( P. 9)
6Left speaker7Right speaker8LED illumination* • The number of blinks or color 
notifies the status of the unit.
(* hereafter referred to as “LED”)9Volume button VOL +/–10Call button 11Microphone12Play/Pause button...

VQT5C48
6
6
Charging
The rechargeable battery is not charged initially. Charge the battery 
before using the headset.
1Place the rechargeable battery in the USB charger
 • The battery can be charged in either the right or left slot of the 
USB charger.
 • Make sure to align the battery  terminals (
, ) correctly as 
marked in the USB charger.

AAA rechargeable 
battery (supplied)
USB charger 
(supplied)
*  Use the USB charger as shown  in the figure, without lifting up the 
 terminal section.
2Connect...

VQT5C48
7
7
ENGLISH
Inserting a battery
Insert the supplied or optional rechargeable battery (or any commercial\
ly 
available alkaline dry cell battery) into the headset.
1Open the battery lid of the headset • Put your fingertip on the groove on the outside lid. Pull the lid toward\
s you.
 • Press 
 on the inside lid, and lower the lid.
Outside 
lid
Groove
Inside 
lid Outside 
lid
Protrusion
2Place the battery inside • Check the battery terminals (, ). 
Make sure the  terminal goes in first.
AAA...

VQT5C48
8
8
Connecting a Bluetooth® device
To establish a wireless connection, register the headset with Bluetooth® 
compatible devices.
Power on for the first time
1Turn on the headset  •The headset will start searching 
for the Bluetooth® device to 
connect to, and the LED on 
the top will blink in blue and 
magenta alternately. (Only one 
operation after purchase)
2When the headset 
(“RP-BTGS10”) is detected 
by the Bluetooth
® device, 
register and connect to it
 • If prompted for a passkey, 
input...

VQT5C48
9
9
ENGLISH
How to wear the headset
Wear the headset from behind your neck and hook over both ears, 
and place the speakers against the bone slightly in front of ear holes.
If you wear the headset in the incorrect position, you may not hear 
sounds well from the speakers and the surrounding environment.
When you find the headset too loose and unstable on your headIf you use the supplied adjustable band, the headset may fit you better.
How to attach the adjustable band
1  Attach the adjustable...

VQT5C48
10
10
Listening to music
If the Bluetooth® compatible device supports the “A2DP” and “AVRCP” 
Bluetooth® profiles, music can be played back with remote control operations 
on the headset.
 •A2DP (Advanced Audio Distribution Pro file): 
Transmits audio to the headset.
 • AVRCP (Audio/Video Remote Control Pro file):
Allows remote control of the device using the headset.
1Connect the Bluetooth® device and the headset (  P. 8)
2Select and play the music or video sound on the Bluetooth® 
device
 • The...