Panasonic Projector PT-DZ10KU User Manual

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 141
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
[Access error log] page
Click [Status] → [Access error log].
The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or 
passwords.
[Access log] page
Click [Status] → [Access log].
The log such as user name accessed to the WEB control page, accessed IP address, accessed time is...

Chapter 4 Settings — [NETWORK] menu
142 - ENGLISH
[Basic control] page
Click [Projector control] → [Basic control].
1
2
5 3
4
1 [POWER]
T
urns on/off the power.
2
 
[SHUTTER]
Switches the setting whether to use the shutter function 
(closing/opening of the shutter). 3

 [OSD]
Switches on (display)/of
f (hide) the on-screen display function.
4
 
[SYSTEM]
Switches the system method.
5

 
[INPUT SELECT]
Switches the input signal.
[Detail control] page
Click [Projector control] → [Detail control].
6 5
4
3 2...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 143
[Network config] page
Click [Detailed set up] → [Network config].
 fClick [Network config] to display the  [CAUTION!]

 screen.
 fThe current settings are displayed by pressing the [Next] button.
 fClick [Change] to display the setting change screen.
1
2
3
4
5
6
7
8
1 [PROJECT OR NAME]
Enter the name of the projector. Enter the host name if it is 
required when using a DHCP server etc.
2
 
[DHCP
  ON]/[DHCP OFF]
To enable the DHCP client function, set to...

Chapter 4 Settings — [NETWORK] menu
144 - ENGLISH
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
4
5
6
7
1 [Time Zone]
Select the time zone.
2
 
[Set time zone]
Updates the time zone setting.
3

 
[NTP
  SYNCHRONIZATION]
Set to [ON] to adjust the date and time automatically.
4
 
[NTP
  SERVER NAME]
Enter the IP address or server name of the NTP server when 
you set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be set up.) 5
 [Date]
Enter the...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 145
[E-mail set up] page
When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail addresses (up to two 
addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]
Select [Enable] to use the E-mail function.
2
 
[SMTP
  SERVER NAME]
Enter the IP address or the server name of the E-mail server 
(SMTP). To enter the server name, the DNS server needs to be 
set up.
3
 
[MAIL
  FROM]
Enter the...

Chapter 4 Settings — [NETWORK] menu
146 - ENGLISH
8
7
9
8
7
7 [E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 
2] blank when two E-mail addresses are not to be used. 8
 Settings of the conditions to send E-mail
Select the conditions to send E-mail.
[MAIL
 CONTENTS]: 
Select either [NORMAL] or [SIMPLE].
[ERROR]: 
Send an E-mail when an error occurred in the self-diagnosis.
[LAMP1 RUNTIME]:
An E-mail message is sent when the remaining lamp on time for 
the...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 147
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
7
8
1 [Auth]
Select the authentication method specified by your Internet 
service provider
.
2
 
[SMTP
  Auth]
Set when the SMTP authentication is selected.
3
 
[POP
  server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0...

Chapter 4 Settings — [NETWORK] menu
148 - ENGLISH
Contents of E-mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== P anas onic  pr ojec t or  r epor t ( CO NF I G URE )  ===
P r ojec t or  T y pe  :  DS 12K
S er ial No  :  S W1234567
-----  E-mail set up dat a -----
T EMPERAT URE WARNING  SET UP 
M I NI M UM  T I M E   at  [  60]  m inut es  int er v al 
I NT A K E  A I R T E M P E RA T URE   O v er  [  46degC /  114degF  ]...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 149
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== P anas onic  pr ojec t or  r epor t(E RRO R) ===
P r ojec t or  T y pe  :  DS 12K
S er ial No  :  S W1234567
-----  check syst em -----
M A I N CP U B US   [   O K   ]
F A N  [   O K   ]
INT AKE AIR T EMPERAT URE  [   O K   ]
O PT ICS MO DULE T EMPERAT URE  [   O K   ]
ARO UND LAMP T EMPERAT URE  [   O K   ]
LAMP1 REMAIN T IME  [   O K   ]
LAMP2 REMAIN T...

Chapter 4 Settings — [NETWORK] menu
150 - ENGLISH
[Change password] page
Click [Change password].
1
2
3
1 [Administrator]
Used to change the setting of the [Administrator].
2
 
[User]
Used to change the setting of the [User]. 3

 [Next]
Used to change the setting of the password.
[Administrator] account
1
2
3
4
5
6
7
1 [Account]
Displays the account to change.
2
 
[Current][User name]
Enter the user name before the change.
3

 
[Current][Password]
Enter the current password.
4

 
[New][User name]
Enter...