Panasonic Projector PT-DZ10KU User Manual

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 131
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
 fAfter selecting the item, press 

asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a...

Chapter 4 Settings — [SECURITY] menu
132 - ENGLISH
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] Displays the image registered by the user.
Note
 fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 133
2) Press the  button.
 fThe  [CONTROL DEVICE SETUP] screen is displayed.
3) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
4)  
Press the  button.
5)

 
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT  SELECT BUTTON] is selected, press the  button, and then press as to select the button to set.
Buttons that can be set
[CONTROL PANEL]...

Chapter 4 Settings — [SECURITY] menu
134 - ENGLISH
4) Press asqw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
Attention
 fThe initial password is “AAAA” by the factory default or when [ALL  USER DA TA] in [INITIALIZE] (x   page   124) is executed. fChange the password periodically that is hard to guess.   

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 135
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press  as to select [NETWORK SETUP].
2)  
Press the  button.
 f The  [NETWORK SETUP] screen is displayed....

Chapter 4 Settings — [NETWORK] menu
136 - ENGLISH
4) Press as to select [STORE], and press the  button.
5)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2)  
Press the  button.
 f The  [NETWORK STATUS] screen is displayed.
Network connections
The projector has a network function, and the following operations are available from the computer using the web...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 137
Name and function of network function parts
3 2
1
1 LAN LINK/ACT lamp (green)
Lights on when connected.
Flashes when transmitting/receiving data.
2
 
 terminal (10Base
 - T/100Base - TX)
Used to connect the LAN cable here.
3
 
LAN10/100 lamp (yellow)
Lights on when connected to the 100Base

- TX.
Accessing from the web browser
1) Start up the web browser on the computer .
2)  
Enter the IP
  address set on the projector into the URL entry field of the web...

Chapter 4 Settings — [NETWORK] menu
138 - ENGLISH
Note
 fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x   page   135). fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   150)
 fThe administrator rights allow use of all functions. 

The user rights allow use of [Projector status] (x   page   139), confirmation...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 139
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
14
15
166
7
8
9
1
2
3
4
17 10
5
11
12
13
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of the shutter (ON: closed, OFF: open).
5

 
[LAMP
  SELECT]
Displays the setting status...

Chapter 4 Settings — [NETWORK] menu
140 - ENGLISH
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the 
error/warning details.
 f The projector may go into the standby status to protect the projector de\
pending on the contents of the error

.
1
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[F
AILED]:
Indicates that there is a...