Panasonic Projector PT-DZ10KU User Manual

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 121
 fWhen [USER] is selected, proceed to Step  3) .
3) Press the  button.
4)  
Press 
 as to select one from [PIN2] to [PIN8], and press  qw to switch the setting.
[FUNCTION BUTTON]
Set the functions of the  button on the remote control.
1) Press as to select [FUNCTION BUTTON].
2)  
Press the  button.
 f The  [FUNCTION BUTTON] screen is displayed.
3) Press  as to select a function.
[DISABLE] Disables the  button.
[P IN P] Switches...

Chapter 4 Settings — [PROJECTOR SETUP] menu
122 - ENGLISH
2) Press the  button.
 fThe  [DATE AND TIME] screen is displayed.
3) Press  as to select [ADJUST CLOCK].
4)  
Press the  button.
 f The  [ADJUST CLOCK] screen is displayed.
5) Press  as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6)  
Press 
 as to select [APPLY], and press the  button.
 fThe setting of the date and time will be completed.
Note
 fTo set the date and time automatically, the projector must be...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 123
Loading the lens position
1) Press as to select [LENS MEMORY].
2)  
Press the  button.
3)

 
Press 
 as to select [LENS MEMORY LOAD].
4)
 
Press the  button.
 f The  [LENS MEMORY LOAD] screen is displayed.
5) Press  as to select the item to load, and press the  button.
6)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
 fThe lens moves automatically to the registered shift, zoom, and focus...

Chapter 4 Settings — [PROJECTOR SETUP] menu
124 - ENGLISH
 fIf you press  asqw to select [CANCEL] and then press the  button, the changed name will not be registered.
 fIf you press 

asqw to select [DEFAULT] and press the  button, the changed name will not be registered and the default 
name will be used.
 f If you select [OK] without entering any characters and press the  button, the default name will be used.
[SAVE ALL USER DATA]
Save the various setting values as a backup in the built-in memory of...

Chapter 4 Settings — [P IN P] menu
ENGLISH - 125
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two images simultaneously .
1) Press as to select [P IN P MODE].
2)  
Press the  button.
 f The  [P IN P MODE] screen is...

Chapter 4 Settings — [P IN P] menu
126 - ENGLISH
12) If [CLOCK PHASE] is selected in Step 6), press qw  to make adjustment.
13)  
Press 
 as to select [FRAME LOCK].
14)
 
Press 
 qw to switch the item.
[MAIN WINDOW] Set frame lock to the input signal set in the main window.
[SUB WINDOW] Set frame lock to the input signal set in the sub window.
15) Press as to select [TYPE].
16)  
Press 
 qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display...

Chapter 4 Settings — [TEST PATTERN] menu
ENGLISH - 127
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 fPress 

qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various 
adjustments.
1) Press  qw to switch...

Chapter 4 Settings — [SIGNAL LIST] menu
128 - ENGLISH
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x
  page   65) for the operation of the menu screen.
 rRegistered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
 f
A name can be set for each sub memory (x   page   130).
Registering new signals
After a new signal is input and the  button on the remote...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 129
 fTo cancel the deletion, press the  button to return to the  [REGISTERED SIGNAL LIST] screen.
3) Press the  button.
 fThe selected signal will be deleted.
Note
 fA registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press  asqw to select the signal to protect.
2)  
Press the  button.
 f The  [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the...

Chapter 4 Settings — [SIGNAL LIST] menu
130 - ENGLISH
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by 
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same 
synchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such...