Panasonic Projector Pt D12000u Operating Instructions

ENGLISH – 81
Special Features
 
Status
Displays the status of the projector.
Press ▲▼ to select “STATUS”. 1. 
REMOTE2 MODE
STATUS
AIR FILTER CLEANINGDEFAULT
Press ENTER. 2. 
The “STATUS” screen will be displayed. • 
STATUS
INPUT
NAME
SIGNAL FREQUENCY
PROJECTOR RUNTIME
LAMP1
LAMP2
LAMP3
LAMP4
INTAKE AIR TEMP.
OPTICS MODULE TEMP.
AROUND LAMP TEMP.
REMOTE2 STATUSRGB2
XGA60-A399999
48.36kHz/59.99Hz
76h
341h / ON /
334h / ON /
342h / ON /
97h / ON /
31°C/87°F
27°C/80°F
31°C/87°F
DISABLE1/3
Press ◄► to move to...

82 – ENGLISH
Projector setup (continued)
Press ENTER. 2. 
The “AIR FILTER CLEANING” screen will be  • 
displayed.
You can select the automatic cleaning time  • 
(“TIME”) and also force cleaning to be carried 
out immediately (“EXECUTE”).
AIR FILTER CLEANING
TIME
EXECUTE00:00
Press ▲▼ to select “TIME”. 3. 
Select “TIME” and then set the time for  • 
automatic cleaning to be carried out. 
If you would like cleaning to be carried out  • 
straight away, select “EXECUTE” and then 
press ENTER.
Press ◄► to...

ENGLISH – 83
Special Features
 
Setting FUNC1
The user can specify the function of the “FUNC1” 
button on the remote control.
Press ▲▼ to select “FUNC1”. 1. 
AIR FILTER CLEANING
AUTO POWER OFF
FUNC1DISABLE
Press ENTER. 2. 
The “FUNC1” screen will be displayed. • 
FUNC1
 DISABLE
C P IN P
Press ▲▼ to select a function. 3. 
DISABLE: • 
Disables the FUNC1 button.
P IN P: • 
Enables setting of P IN P to “OFF”, “USER 1”, 
“USER 2”, or “USER 3”. (pp. 85-86)
SUB MEMORY: • 
The sub memory can be switched. (pp....

84 – ENGLISH
Projector setup (continued)
 
Load all user data
This loads various setting values that were saved as a 
backup to the internal memory of the projector.
Press ▲▼ to select “LOAD ALL  1. 
USER DATA”.
SAVE ALL USER DATA
LOAD ALL USER DATA
INITIALIZE
Press ENTER. 2. 
The “SECURITY PASSWORD” screen will be  • 
displayed.
SECURITY PASSWORD
Enter the password set for  3. 
the security password of the 
security menu.
A confirmation screen will appear. • 
ENTER
LOAD ALL USER DATA?
After data has...

ENGLISH – 85
Special Features
 
P IN P
Using the P IN P function
Two videos can be projected simultaneously by 
placing a separate small sub screen within the main 
screen.
Press ENTER. 1. 
The “P IN P” screen will be displayed. • 
P IN P
P IN P MODE
OFF
Press ▲▼ to select “P IN P  2. 
MODE”.
P IN P MODE
 OFF
C USER1
 USER2
 USER3
Press ▲▼ to select a function. 3. 
OFF: • 
The P IN P function is not used.
USER1, USER2, USER3: • 
The P IN P function is used with the settings 
that were set in “Setting the...

86 – ENGLISH
P IN P (continued)
MAIN WINDOW: • 
The input terminal for the main window is 
displayed. Press ▲▼ to select an item, and 
press ENTER to switch to the item.
SIZE: The user can specify the display size of 
the main window between 10 % and 100 %.
POSITION: The user can specify the display 
position of the main window on the screen.
SUB WINDOW: • 
The input terminal for the SUB WINDOW is 
displayed. Press ▲▼ to select an item, and 
press ENTER to switch to the item.
SIZE: The user can specify...

ENGLISH – 87
Special Features
Displaying the internal test pattern
 
Test pattern
Results of adjustment on the image, picture quality, 
position, size and other factors will not be reflected 
in test patterns. Be sure to display the input signal 
before performing various kinds of setting.
Press ◄► to search through the  1. 
various types of test patterns.
Cycle of displayed internal test 
  „
patterns
The setting will change as follows each time ◄► 
is pressed.
MENU screen
+
Entry screenMENU screen
+...

88 – ENGLISH
Setting the security
Displaying the security 
screen
Password settings and text settings can be made 
after the security screen is displayed.
If using for the first time  z
Press ▲, ►, ▼, ◄, ▲, ►, ▼ and  1. 
◄ in this order.
If the existing password has been changed  z
Enter the new password.
SECURITY PASSWORD
1b1b1b1b1b1b1b1b
Press ENTER. 2. 
The “SECURITY” screen will be displayed. • 
Note
Only asterisks  • 
* will appear on the screen to 
represent the actual characters of the password...

ENGLISH – 89
Special Features
OFF: • 
The text display is disabled.
TEXT: • 
The text display is enabled.
LOGO1: • 
The picture registered by the user will be projected.
LOGO2: • 
The picture registered by the user will be projected.
LOGO3: • 
The Panasonic logo is projected.
Note
Separate software is required in order to create the  • 
pictures to use for “LOGO1” and “LOGO2”. Consult 
your dealer.
  Changing the text
When DISPLAY SETTING is enabled, you can change 
the text that is displayed.
Press ▲▼...

90 – ENGLISH
Setting the security (continued)
 
Control device setup
Control from the remote control and main unit 
controls can be restricted.
Press ▲▼ to select “CONTROL  1. 
DEVICE SETUP”.
DISPLAY SETTING
TEXT CHANGE
CONTROL DEVICE SETUPOFF
Press ENTER. 2. 
The “CONTROL DEVICE SETUP” screen will be  • 
displayed.
CONTROL DEVICE SETUP
CONTROL PANEL
REMOTE CONTROLLER
Press ▲▼ to select “CONTROL  3. 
PANEL” or “REMOTE 
CONTROLLER”.
CONTROL PANEL: • 
Restriction of control from the main unit 
controls can...