Panasonic Projector Pt D12000u Operating Instructions

ENGLISH – 91
Special Features
How to use network functions
 
Network standby
When the projector is in a standby state, you can 
control the power of the projector from a computer 
connected via a wired LAN.
Press ▲▼ to select “NETWORK  1. 
STANDBY”.
NETWORK
NETWORK STANDBY
NETWORK SETUPOFF
Press ◄► to switch “NETWORK  2. 
STANDBY”.
The setting will change as follows each time  • 
◄► is pressed.
OFFON
ON: • 
Enables the network standby function.
OFF: • 
Disables the network standby function.
Initial...

92 – ENGLISH
How to use network functions (continued)
DHCP (DHCP client function) : • 
Set the DHCP item to ON when to acquire 
an IP address automatically using the DHCP 
server. Set to OFF if DHCP server is not used. 
Enter the IP address if DHCP server is not 
used.
IP ADDRESS (Display of IP address and  • 
setting) :
Enter the IP address if DHCP server is not 
used.
SUBNET MASK (Displaying and setting the  • 
subnet mask) :
If not using a DHCP server, enter the subnet 
mask.
GATEWAY (Display of...

ENGLISH – 93
Special Features
 
Network connections
The projector is equipped with network functions, and web browser controls can be used to carry out the 
following operations from a computer.
Projector settings and adjustments • 
Projector status display • 
Transmission of E-mail messages if there is a problem with the projector • 
Note
A LAN cable is required to use the network function. A cross cable is required when connecting directly to a  • 
computer. Straight cables are used when connecting...

94 – ENGLISH
How to use network functions (continued)
Accessing from the Web browser
Activate the Web browser in the personal computer. 1. 
Enter the IP address set by the projector into the URL input field of the  2. 
Web browser.
Enter your “User Name” and “Password”. 3. 
The factory default settings are user1 (user privileges) or admin1 (administrator privileges) for the user name  • 
and panasonic (lowercase letters) for the password.
Press OK to display the Projector status page. 4. 
Note
Avoid...

ENGLISH – 95
Special Features
Basic control page  „
This page is the first page displayed when the projector is accessed through a web browser.
To move from another page, click [Projector control], then [Basic control].
Page selection tabs
Click these to switch pages.
Monitor information button
Click this item, and the status of the projector 
is displayed.
This displays the on-screen status. It is 
displayed even if the on-screen display of the 
projector is set to off.
Detailed set up button
Click this...

96 – ENGLISH
How to use network functions (continued)
Detail control page  „
Click [Projector control], then [Detail control] to display the Detail control page.
Lens adjustment
Menu display
Test pattern display
This button updates the on-screen description 
on the right of the control page with the latest 
information.
Pressing these buttons controls the projector 
and updates the on-screen description on 
the right of the control page when control is 
finished.
Projector status page  „
Click [Status],...

ENGLISH – 97
Special Features
Error information page  „
When  is displayed on the status information screen, click it to display the error 
details.
Depending on the nature of the error, the projector may be placed in the standby mode for its own  • 
protection.
OK: Normal operation
FAILED: Occurrence of trouble
When [FAILED] has appeared for an item  z
Parameter Description
MAIN CPU BUS Trouble has occurred in the microcomputer circuitry. Consult your dealer.
FAN Trouble has occurred in the fan or its...

98 – ENGLISH
How to use network functions (continued)
E-mail setup page  „
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can 
be sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
Select “Enable” to use the E-mail function.
Enter the IP address or server name of the 
E-mail server (SMTP). The DNS server must 
be set if the server name is entered....

ENGLISH – 99
Special Features
Periodic warning interval setting (E-mail is sent 
on the checked days of the week/times) 

100 – ENGLISH
How to use network functions (continued)
E-mail setup page (continued)  „
Select the conditions for sending E-mail to the 
second E-mail address.
MAIL CONTENTS:
Select “NORMAL” or “SIMPLE”.
ERROR:
an error is detected by self-diagnosis.
LAMP1 RUNTIME:
remaining lamp service time has reached the 
value set in the field.
LAMP2 RUNTIME:
remaining lamp service time has reached the 
value set in the field.
LAMP3 RUNTIME:
remaining lamp service time has reached the 
value set in the field.
LAMP4...