Panasonic Projector Pt D12000u Operating Instructions

ENGLISH – 51
Basic Operation
On-screen menus
 
MAIN MENU
The main menu consists of the following 11 menu 
items. When a main menu item is selected, the screen 
changes to a sub-menu selection screen.
Icon MAIN MENU item
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
  SUB MENU
The sub-menu screen appears, and you can set and 
adjust the various items in the sub-menu.
PICTURE (pp. 54-59)  „
ENTER
PICTURE
PICTURE MODE...

52 – ENGLISH
On-screen menus (continued)
POSITION (pp. 60-63)  „
ENTER
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
GEOMETORY
 MENU SELECT
 SUB MENUDEFAULT
0
OFF
ADVANCED MENU (pp. 64-68)  „
ADVANCED MENU
DIGITAL CINEMA REALITY
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING
FRAME DELAY
RASTER POSITION
 MENU SELECT
 CHANGEAUTO
OFF
DEFAULT
DISPLAY LANGUAGE (p. 69)  „
ENTER
DISPLAY LANGUAGE
C ENGLISH
 DEUTSCH
 FRANÇAIS
 ESPAÑOL
 ITALIANO
 
ÔŠ  ¤ UXVVOMN à´	¯
 SELECT
 SET
DISPLAY OPTION (pp....

ENGLISH – 53
Basic Operation
 
Using the menu screens
Press MENU. 1. 
The “MAIN MENU” appears on the screen. • 
ENTER
MAIN MENU
 PICTURE
 POSITION
 ADVANCED MENU
 DISPLAY LANGUAGE
 DISPLAY OPTION
 PROJECTOR SETUP
  P IN P
 TEST PATTERN
 SIGNAL LIST
 SECURITY
 NETWORK
 MENU SELECT
 SUB MENU
Press ▲▼ to select the desired  2. 
item.
The selected item is displayed with the colors  • 
set by OSD DESIGN. (p. 75)
ENTER
MAIN MENU
 PICTURE
 POSITION
 ADVANCED MENU
 DISPLAY LANGUAGE
 DISPLAY OPTION
 PROJECTOR...

54 – ENGLISH
Adjusting the picture
 
Switching the picture mode
The user can switch to the desired picture mode 
suitable for the image source and the environment in 
which this projector is used.
Press ▲▼ to select “PICTURE  1. 
MODE”.
PICTURE
PICTURE MODE
 CONTRASTSTANDARD
0
Press ◄► to switch “PICTURE  2. 
MODE”.
The setting will change as follows each time  • 
◄► is pressed.
STANDARD
USER
CINEMA
GRAPHIC
NATURAL
DYNAMIC
STANDARD: • 
The picture becomes suitable for moving images in 
general.
CINEMA: •...

ENGLISH – 55
Basic Operation
Press ◄► or ENTER. 2. 
The “CONTRAST” individual adjustment screen  • 
will be displayed.
CONTRAST
 ADJUST0
Press ◄► to adjust the level. 3. 
Operation AdjustmentAdjustment 
range
Press ► 
button.
Raises the picture 
brightness and the 
picture becomes clearer.Maximum value 
31
Press ◄ 
button.Lowers the picture 
brightness and 
weakens the picture. Minimum value 
-31
Attention
If you need to adjust the “BRIGHTNESS”, it should  • 
be adjusted before other adjustments are...

56 – ENGLISH
Adjusting the picture (continued)
Press ◄► to switch “COLOR  3. 
TEMPERATURE”.
The setting will change as follows each time  • 
◄► is pressed.
DEFAULT
HIGH
USER1
MIDDLE
USER2
LOW
When any setting other than “OFF” has been  • 
selected for color matching, the COLOR 
TEMPERATURE setting is fixed at “USER1”.
“DEFAULT” cannot be selected when the picture  • 
mode has been set to “USER”.
To further adjust toward the   „
desired white balance
Select “USER1” or “USER2” in  4. 
Step 3.
Press ENTER....

ENGLISH – 57
Basic Operation
Press ◄► to switch “SYSTEM  3. 
DAYLIGHT VIEW”.
The setting will change as follows each time  • 
◄► is pressed.
3 (High)
OFF (No correction)
2 (Medium)
1 (Low)
 
Sharpness setting
This adjusts the sharpness of the pictures.
Press ▲▼ to select  1. 
“SHARPNESS”.
 SYSTEM DAYLIGHT VIEW
 SHARPNESS
 NOISE REDUCTIONOFF
0
OFF
Press ◄► or ENTER. 2. 
The “SHARPNESS” individual adjustment  • 
screen will be displayed.
SHARPNESS
 ADJUST0
Press ◄► to adjust the level. 3. 
Operation...

58 – ENGLISH
Adjusting the picture (continued)
AUTO IRIS (Automatic aperture   „
adjustment)
OFF (No automatic 
adjustment)
3 (High)
1 (Low)
2 (Intermediate)
MANUAL IRIS (Fixed aperture   „
adjustment)
OFF (No fixed iris)
63 (High)
1 (Low)
2œ62 (Intermediate)
DYNAMIC GAMMA (signal   „
compensation amount 
adjustment)
OFF (No automatic 
correction)
3 (High)
1 (Low)
2 (Intermediate)
Note
The contrast is set to the maximum level when  • 
“DYNAMIC IRIS” is set to “3”.
  Registering the picture mode...

ENGLISH – 59
Basic Operation
ET-MD100SD4:
When single link SDI signals
Select from AUTO YCbCr, 1 080/60i, 1 035/60i, 
720/60p, 1 080/24p, 1 080/50i, 1 080/30p, 
1 080/25p, 1 080/24sF, 720/50p, 480i, and 576i.
When dual link SDI signals
Select from AUTO RGB, AUTO X’Y’Z’, 
1 920/24p/RGB, 2 048/24p/RGB, 2 048/24p/XYZ, 
1 920/24sF/RGB, 2 048/24sF/RGB, 2 048/24sF/
XYZ, 1 920/25p/RGB, 1 920/30p/RGB, 1 920/50i/
RGB, and 1 920/60i/RGB.
Note
Press the DEFAULT button to return to AUTO  • 
YCbCr or AUTO RGB.
“AUTO...

60 – ENGLISH
Adjusting the position
 
Shift adjustment
This function allows the user to adjust the raster 
position vertically or horizontally if the position of 
the image projected on the screen is displaced 
even when the projector is properly aligned with the 
screen, and the internal test patterns are correctly 
framed.
Press ▲▼ to select  “SHIFT”. 1. 
POSITION
SHIFT
ASPECT
DEFAULT
Press ENTER. 2. 
The “SHIFT” screen will be displayed. • 
SHIFT
V
H12
212
Press ▲▼◄► to adjust the  3. 
position.
For...