Panasonic Projector Pt D12000u Operating Instructions

ENGLISH – 61
Basic Operation
 
Adjusting the aspect ratio
This changes the aspect ratio of the projected image.
This changes the aspect ratio for the screen range 
selected with “SCREEN SETTING”. Set “SCREEN 
SETTING” first. (p. 72)
Press ▲▼ to select “ASPECT”. 1. 
SHIFT
ASPECT
ZOOMDEFAULT
Press ◄► or ENTER. 2. 
The “ASPECT” individual adjustment screen  • 
will be displayed.
ASPECT
 CHANGEDEFAULT
Press ◄► to switch “ASPECT”. 3. 
The setting will change as follows each time  • 
◄► is pressed.
VID AUTO...

62 – ENGLISH
Adjusting the position (continued)
 
Adjusting the zoom ratio
This adjusts the size of the projected pictures.
Press ▲▼ to select “ZOOM”. 1. 
ASPECT
ZOOM
CLOCK PHASEDEFAULT
0
Press ENTER. 2. 
The “ZOOM” screen will be displayed. • 
ZOOM
MODE
INTERLOCKED
V
H
HVINTERNAL
OFF
100%
100%
100%
Press ▲▼ to select “MODE”. 3. 
Press ◄► to switch “MODE”. 4. 
The setting will change as follows each time  • 
◄► is pressed.
INTERNALFULL
INTERNAL: • 
Enlarges the size of the pictures to within the 
default...

ENGLISH – 63
Basic Operation
OFF: • 
Geometry correction is not performed.
KEYSTONE: • 
This adjusts projected images when they are 
distorted to a trapezoid.
CURVED: • 
This adjusts projected images when they are 
distorted to a curved surface.
PC: • 
This is for performing geometry correction from a PC.
Select “KEYSTONE” or  3. 
“CURVED” in Step 2, and then 
press ENTER.
The “GEOMETRY:KEYSTONE” or  • 
“GEOMETRY:CURVED” screen will be 
displayed.
GEOMETRY:KEYSTONE
VERTICAL KEYSTONE
VERTICAL SUB...

64 – ENGLISH
How to use ADVANCED MENU
 
Digital cinema reality
Increase the vertical resolution when the PAL (or 
SECAM) 576i signal input or the NTSC 480i, 1 080/50i 
and 1 080/60i signal input is applied.
Press ▲▼ to select “DIGITAL  1. 
CINEMA REALITY”.
ADVANCED MENU
DIGITAL CINEMA REALITY
BLANKINGAUTO
Press ◄► or ENTER. 2. 
The “DIGITAL CINEMA REALITY” individual  • 
adjustment screen will be displayed.
DIGITAL CINEMA REALITY
 CHANGEAUTO
Press ◄► to switch “DIGITAL  3. 
CINEMA REALITY”.
The setting...

ENGLISH – 65
Basic Operation
Press ENTER. 2. 
The “BLANKING” adjustment screen will be  • 
displayed.
BLANKING
UPPER
LOWER0
0
Press ▲▼ to select the desired  3. 
item for adjustment.
Press ◄► to adjust blanking. 4. 
The adjustment value for the PT-D12000U can  • 
be changed within a range of 0 to 525 vertically 
and 0 to 700 horizontally. 
The adjustment value for the PT-DZ12000U can  • 
be changed within a range of 0 to 600 vertically 
and 0 to 960 horizontally.
When correcting the upper blanking of the...

66 – ENGLISH
How to use ADVANCED MENU (continued)
Press ENTER. 2. 
The “CLAMP POSITION” screen will be  • 
displayed.
CLAMP POSITION
POSITION
 ADJUST1
Press ◄► to adjust. 3. 
The value changes from 0 to 255. • 
The optimal value for the clamp position  • 
adjustment
If dark areas are crushed:
The optimal value is the point where the dark 
area is best improved.
If the dark areas are displayed in green:
The optimal value is the point where the green 
areas become black and the crushing effect is...

ENGLISH – 67
Basic Operation
Press ENTER.10. 
The “BRIGHT ADJUST” screen will be  • 
displayed.
BRIGHT ADJUST
BRIGHT INSIDE
BRIGHT OUTSIDE
Press ▲▼ to select “BRIGHT 11. 
INSIDE”.
Press ENTER.
12. 
The “BRIGHT INSIDE” adjustment screen will  • 
be displayed.
BRIGHT INSIDE
INTERLOCKED
WHITE
RED
GREEN
BLUEON
0
0
0
0
When “INTERLOCKED” is set to “OFF”,  • 
individual adjustment of “RED”, “GREEN” and 
“BLUE” will be possible.
Press ▲▼ to select an item, and 13. 
press ◄► to adjust the setting.
Once...

68 – ENGLISH
How to use ADVANCED MENU (continued)
Press ◄► to switch “FRAME 2. 
DELAY”.
The setting will change as follows each time  • 
◄► is pressed.
DEFAULTSHORT
DEFAULT: • 
This is the standard setting.
SHORT: • 
Shortens the delay at the expense of some picture 
quality.
Note
When “FRAME DELAY” is set to “SHORT”,  • 
deterioration in the picture quality will occur. 
Furthermore, the noise reduction function cannot be 
used.
  Raster position
When the scaler is set such that the image is smaller...

ENGLISH – 69
Basic Operation
Setting the DISPLAY LANGUAGE
Changing the display 
language
This lets you switch the on-screen display language.
Press ▲▼ to select the desired  1. 
language.
DISPLAY LANGUAGE
C ENGLISH
 DEUTSCH
 FRANÇAIS
 ESPAÑOL
 ITALIANO
 
ÔŠ  ¤ UXVVOMN à´	¯
Press ENTER to establish your  2. 
selection.
Menus, setting items, adjustment screens, and  • 
control button names will be displayed in the 
language the user chooses.
The available languages are: English, German  •...

70 – ENGLISH
Display Option settings
 
Adjusting color matching
When multiple sets are used simultaneously, this 
projector allows the user to correct the difference of 
colors among the sets.
Press ▲▼ to select “COLOR  1. 
MATCHING”.
DISPLAY OPTION
COLOR MATCHING
LARGE SCREEN CORRECTIONOFF
OFF
Press ◄► to switch “COLOR  2. 
MATCHING”.
The setting will change as follows each time  • 
◄► is pressed.
OFF3COLORS
MEASURED
7COLORS
709MODE
OFF: • 
Color matching adjustment is not carried out.
3COLORS: • 
It is...