Panasonic Part For Network Functions And SD Memory Card Functions PT-L735NTE Manual

51
SD control
Note:
To control SD Memory Card with the Web browser control of the projector, go (on
the projector) to [On-screen menu] 
→[Network settings], set [WEB control] to ON,
and set [SD mode] to Web (set to Viewer on shipping).
Note:
If the thumbnail screen is not renewed,
check the following settings and reset
them when the settings are not correct.
• Internet Explorer
Select [Tool] 
→[Internet option] →
[Setting] of the temporary Internet file
and check that [Confirm automatically] is...

52
Click the page, so the image
will be magnified in the Web
browser and projected on
the projector screen.
Presentation screen
Changing password Click Change password in the menu.
Note:
Up to16 characters can be used for a password.
Use alphanumeric characters and symbols to create a password.
Both upper and lower case letters can be used.
Use of Web browser control 

53
Using a PDA
From a personal digital assistance (PDA) and other portable information terminal, the
user can access this projector to make setting on the projector and to operate data of
the SD card.
For settings of PDA and the network card for PDA, see the instruction manual for that
device.
Starting the Web browser control (PDA)Start the browsing software and enter the following address:
http://(the IP address set by the projector)/index_p.htmThen the Web browser control (PDA) will start.
Top screenIf...

54
Menu screenPress [Projector Control], [SD Control] or [Status].
Projector Control
Notes:
•When the power is turned ON, confirm that the indicator lamp is lighting, then go
to the top screen again.
•Immediately after power turning ON, it may happen to be unable to connect with
the projector. If this is the case, wait for a while and then try connection again.
•Either basic control or option control will not function unless Web power is set to
ON in the option setting of the projector.
•Power ON...

55
SD Control
Status
PresentationThe NEXT button will project the
next image and the PREV button
the previous image.
ListA list of files that can be replayed
will appear. Press the button
located at the right of the desired
file for replay, and the image will
be projected. (1) Switch  to “SD CARD” using the input switching (RGB) button on the projector or
the remote control.
This switching can be made also on the screen of the projector control.
(2) Click “SD control” of the menu.
(3) Select from folders...

56
Use of Image Creator 1.0A
Starting/ending Image Creator 1.0A
Functions on the main screen
Start-upFrom the [Start] menu at the left bottom of the screen, go
to [All Programs] →[Image Creator], and select [Image
Creator 1.0A].
EndClick [Exit] on the operation screen.
Activate Image Creator 1.0A, and the main screen will open.
Function of each part of main screen is illustrated in the diagram below.
File
Settings
Close
Exit
Capture
slides
Capture
images
Convert and save SD card/
Other folder
Thumbnail...

57
Use of Image Creator 1.0A
File menu
Capture slides, Capture an image, Convert and save and Exit are available
in this menu.
Settings menu
This menu allows you to use change of JPEG conversion format (saving in DCF
format, making thumbnails) and adjust of JPEG quality (low-quality or high-
quality).
Version information
You can check the version of Image Creator 1.0A software.
Capture slides button
Presentation files created with Microsoft PowerPoint are captured into Image
Creator 1.0A.
Capture images...

58
Converting and saving captured images
Click [Convert and save] on the main screen.
A setting screen appears.
Use of Image Creator 1.0A
SlideClose
Cancel/Exit Slide display All image
Compress
ion format
Convert
and screen
size
Current
image 

59
Convert and screen size setting
Specify the screen size of the file to be saved.
Current image button
Currently selected image file will be saved in the specified compression format
and screen size onto the SD card or into other folders. The name of the saved file
will be generated automatically.
All image button
All image files captured into Image Creator are saved in the specified
compression format and screen size onto the SD card or into other folders. The
name of the saved file will be generated...

60
(1) Press the [Capture slide] button and select your
desired presentation files, so an [Open] windows
will appear. In the [File location] menu, or using
the folder icon, move to the location in which your
desired presentation files for conversion exist.
Select the presentation files and press the [Open]
button.
(2) Press Convert and save button to save the
captured image files onto the SD card or other
folders.
To capture all slides in the presentation file:Press the [Capture all] button.
To capture...