Panasonic Part For Network Functions And SD Memory Card Functions PT-L735NTE Manual

							51
SD control
Note:
To control SD Memory Card with the Web browser control of the projector, go (on
the projector) to [On-screen menu] 
→[Network settings], set [WEB control] to ON,
and set [SD mode] to Web (set to Viewer on shipping).
Note:
If the thumbnail screen is not renewed,
check the following settings and reset
them when the settings are not correct.
• Internet Explorer
Select [Tool] 
→[Internet option] →
[Setting] of the temporary Internet file
and check that [Confirm automatically] is
checkmarked.
• Netscape
Select [Edit] 
→[Setting] →[Detail] →
[Cache] →[Comparison between the
page of Cash and the one on the
network] and check that [When the page
is out of time] is checkmarked.
SD file list screen
SD thumbnail screen 
Switch to SD CARD by using the input selector (RGB) button
of the projector or the remote control.
It is also possible to switch to it on the basic control screen of the
projector control.
1
Click SD control in the menu.2
Use of Web browser control
Select a folder in the SD card.
Clicking an image will zoom in on it 
within the Web browser.
Clicking Projection will display it 
on the projector.Select from display of thumbnail, display
of file name list and presentation.
Control auto-play. 
Clicking a file name will zoom in on it
within the Web browser.
Clicking  Projection  will display the file. 
						

							52
Click the page, so the image
will be magnified in the Web
browser and projected on
the projector screen.
Presentation screen
Changing password Click Change password in the menu.
Note:
Up to16 characters can be used for a password.
Use alphanumeric characters and symbols to create a password.
Both upper and lower case letters can be used.
Use of Web browser control 
						

							53
Using a PDA
From a personal digital assistance (PDA) and other portable information terminal, the
user can access this projector to make setting on the projector and to operate data of
the SD card.
For settings of PDA and the network card for PDA, see the instruction manual for that
device.
Starting the Web browser control (PDA)Start the browsing software and enter the following address:
http://(the IP address set by the projector)/index_p.htmThen the Web browser control (PDA) will start.
Top screenIf a password has been set, enter it and press ENTER.
Note:
Explanation made here uses a PDA, pocket Internet explorer 3.0, for example,
with the screen size being 240 wide and 320 long.
Note:
In case you forget the password, assign a new password to the projector (For
security reason, the projector does not show the password that you have been
using).
Use of Web browser control
Enter the password if any has been defined. 
						

							54
Menu screenPress [Projector Control], [SD Control] or [Status].
Projector Control
Notes:
•When the power is turned ON, confirm that the indicator lamp is lighting, then go
to the top screen again.
•Immediately after power turning ON, it may happen to be unable to connect with
the projector. If this is the case, wait for a while and then try connection again.
•Either basic control or option control will not function unless Web power is set to
ON in the option setting of the projector.
•Power ON operation will not occur unless Web power is set to ON in the option
setting of the projector. At this moment, however, the projector control screen
has the same indications as those displayed when normal operation is available.
Use of Web browser control 
						

							55
SD Control
Status
PresentationThe NEXT button will project the
next image and the PREV button
the previous image.
ListA list of files that can be replayed
will appear. Press the button
located at the right of the desired
file for replay, and the image will
be projected. (1) Switch  to “SD CARD” using the input switching (RGB) button on the projector or
the remote control.
This switching can be made also on the screen of the projector control.
(2) Click “SD control” of the menu.
(3) Select from folders in the SD card.
(4) Select form control modes (presentation and list).
Use of Web browser control
When power is turned ON:When the system is in Web standby state:
Note:
Although the Status information is updated at constant intervals, pressing the
update button of the Web browser will display the current information. 
						

							56
Use of Image Creator 1.0A
Starting/ending Image Creator 1.0A
Functions on the main screen
Start-upFrom the [Start] menu at the left bottom of the screen, go
to [All Programs] →[Image Creator], and select [Image
Creator 1.0A].
EndClick [Exit] on the operation screen.
Activate Image Creator 1.0A, and the main screen will open.
Function of each part of main screen is illustrated in the diagram below.
File
Settings
Close
Exit
Capture
slides
Capture
images
Convert and save SD card/
Other folder
Thumbnail display
Launch Wireless Manager
Version information 
						

							57
Use of Image Creator 1.0A
File menu
Capture slides, Capture an image, Convert and save and Exit are available
in this menu.
Settings menu
This menu allows you to use change of JPEG conversion format (saving in DCF
format, making thumbnails) and adjust of JPEG quality (low-quality or high-
quality).
Version information
You can check the version of Image Creator 1.0A software.
Capture slides button
Presentation files created with Microsoft PowerPoint are captured into Image
Creator 1.0A.
Capture images button
Image files created with other applications (either in JPEG, BMP, TIFF, PNG
format) are captured into Image Creator 1.0A.
SD card/Other folder selection
Here select the destination of captured image files.
Convert and save button
The destination folders for saving selected in [SD Memory Card / other folders]
will be subjected to format conversion (automatic, JPEG and PNG conversion)
and size conversion, and then files are saved.
Launch Wireless Manager button
Wireless Manager 3.0 will be started.
(Once it is started, it will be minimized on the task bar. To operate the function,
right-clicking the icon with the mouse.)
If images are saved using Image Creator 1.0A in advance, then a series of steps
will be performed, including: startup of Wireless Manager 3.0; display of the
presentation mode window; and up to thumbnail display of images saved by
Image Creator 1.0A. However, the presentation mode window may not be
displayed if Wireless Manager 3.0 has been activated.
Thumbnail display
The images captured into Image Creator 1.0A are displayed in reduced size.
They can be sorted or deleted by right clicking with the mouse.
Exit button
Quits Image Creator 1.0A.
Close buttonQuits Image Creator 1.0A. 
						

							58
Converting and saving captured images
Click [Convert and save] on the main screen.
A setting screen appears.
Use of Image Creator 1.0A
SlideClose
Cancel/Exit Slide display All image
Compress
ion format
Convert
and screen
size
Current
image 
						

							59
Convert and screen size setting
Specify the screen size of the file to be saved.
Current image button
Currently selected image file will be saved in the specified compression format
and screen size onto the SD card or into other folders. The name of the saved file
will be generated automatically.
All image button
All image files captured into Image Creator are saved in the specified
compression format and screen size onto the SD card or into other folders. The
name of the saved file will be generated automatically.
Slide display
The currently selected image file will be displayed.
Cancel/Exit button
This button stops converting and saving process and closes the screen. If you
press this button when converting or saving is in progress, the remaining process
will be stopped and the screen will be closed.
Close button
This button stops converting and saving process and closes the screen. If you
press this button when converting or saving is in progress, the remaining process
will be stopped and the screen will be closed.
Slide button
This button switches the display of image files captured into Image Creator.
Compression format setting
This button changes the displayed image files captured by Image Creator 1.0A.
Note:
In the AUTO mode, an optimum compression format will be selected automatically
according to the image.
Use of Image Creator 1.0A 
						

							60
(1) Press the [Capture slide] button and select your
desired presentation files, so an [Open] windows
will appear. In the [File location] menu, or using
the folder icon, move to the location in which your
desired presentation files for conversion exist.
Select the presentation files and press the [Open]
button.
(2) Press Convert and save button to save the
captured image files onto the SD card or other
folders.
To capture all slides in the presentation file:Press the [Capture all] button.
To capture only desired slides one by one:Press the [Previous slide] or [Next slide] button
to view the desired slide, and then press the [Capture] button.
Press the [Stop/End] button when all captures are complete.
Note:
Only presentation files saved in PPT format (with a .ppt extension) can be
captured. A file saved in other format (e.g. a file with a .pps extension) should be
opened with PowerPoint and saved in PPT format.
Notes:
•Press the Cancel/Exit button if you want to stop the process of Capture all.
•All captured slides are converted so that the aspect ratio will be 4:3. Slides with
other aspect ratio than 4:3 will not be reproduced in correct image.
•Some slides created with PowerPoint97 may cause an error during their
converting process. If this occurs, you can solve the problem by converting the
slides with the PC that has PowerPoint2000 installed.
•If image files are pasted in combined PowerPoint 97 and Windows 98, normal
conversion is not available.
Capturing presentation files created with
Microsoft PowerPoint97/2000/2002
Use of Image Creator 1.0A