Home > Panasonic > Projector Accessories > Panasonic Lamp Units For Lcd Projector Commercial Use ET-LAL6510, ET-LAL6510W Replacement Instructions

Panasonic Lamp Units For Lcd Projector Commercial Use ET-LAL6510, ET-LAL6510W Replacement Instructions

Add to Favourites
    Download as PDF

    View the Panasonic Lamp Units For Lcd Projector Commercial Use ET-LAL6510, ET-LAL6510W Replacement Instructions for free. All the Panasonic manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 1 Replacement Instructions Lamp units for LCD Projector Commercial Use ET-LAL6510 (1 pc) ET-LAL6510W (2 pcs) 1234 1234 123412345 12345 12345Model No. TQZH 420-2 Read these instructions completely before replacing Lamp unit. Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on...
    Page 2 2 Notes on replacing the lamp unit • Take extreme care when handling the removed lamp unit, as it contains gas under high pressure and can easily become damaged if it is struck against hard objects or dropped. • The old lamp unit may shatter if it is handled roughly after removal. Ask an Authorized Waste Disposal Agency to dispose of the old lamp unit. • A Phillips screwdriver is necessary for removing the lamp unit. Make sure that your hands are not slippery when using the screwdriver. Lamp unit...
    Page 3 3 4.Use a Phillips screwdriver to loosen the two lamp unit fixing screws until the screws turn freely . Then hold the handle of the lamp unit and gently pull it out from the projector. Lamp unit 1 Fixing screwsLamp unit 2 Fixing screws Lamp unit 1 Lamp unit 2 Handle Caution The lamp unit will be hot after it has been used. You might get burned if you touch it while it is still hot. Lamp unit coverFixing screwsTab 3.Remove the lamp unit cover by pulling it forward. Caution • Firmly install the lamp unit...
    Page 4 4 Matsushita Electric Industrial Co., Ltd © 2002 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. M1002-4047 Printed in Japan Note • If the “MENU” button is pressed, the lamp time resetting screen will be cancelled. Accessory• Air filter x1 10.Press the “MENU” button to display the MAIN MENU screen, and then press the and buttons to move the cursor to select “OPTION2”. 11 .Press the ENTER button to display the OPTION2 screen, and then use the and buttons to select “LAMP RUNTIME”....
    Start reading Panasonic Lamp Units For Lcd Projector Commercial Use ET-LAL6510, ET-LAL6510W Replacement Instructions

    Related Manuals for Panasonic Lamp Units For Lcd Projector Commercial Use ET-LAL6510, ET-LAL6510W Replacement Instructions

    All Panasonic manuals