Panasonic Part For Network Functions And SD Memory Card Functions PT-L735NTE Manual

Part for Network Functions and
SD Memory Card Functions 
(PT-L735NTE) 

2
Notes for use ..........................4
Information on SD Memory Card ......4
Instructions on handling ....................4
Instruction on storage ........................4
For protection of important data ........4To create a backup copy of the data
stored on the SD card ........................5
Write protection switch ......................5
Information on wireless card ............6
Available channels ............................8
Typical applications of network
functions / SD Memory Card...

3
Use of Web browser control ....46
Settings on the projector..................46
Web control......................................46
Web power supply ..........................46
Web password ................................46
Settings on the personal computer 47
Operation of Web browser control ..48
Top screen ......................................48
Projector control ..............................49
Basic control screen ........................49
Option control screen ......................49
Monitor...

4
Notes for use
Information on SD Memory Card
This SD card is a semiconductor memory with the size of 24mm x 32mm x 2.1mm, as
small as a postage stamp, and is expected to be a next-generation recording medium
that replaces minidisks (MDs), compact disks (CDs) and cassette tapes. The card
allows repetition of data reading, writing and deleting.
Instructions on handling
Abstain from the following:
• To disassemble or modify the card
• To give the card a strong impact, twisting, bending, dropping, treading,...

To create a backup copy of the data stored on the SD card
Double click and open the icon of SD card
drive in My Computer of your personal
computer (on the desktop if your computer is
Macintosh) and drag and drop the DCIM
folder onto desktop (while pressing the
Option button, for Macintosh machine). This
operation can create copies of all data within
the DCIM folder into your personal
computer.
Write protection switch
• Putting the write-protection switch of SD
card to the LOCK position will disable...

6
Information on wireless card
Notes for use
The optional wireless card (ET-CDWL2E) uses radio wave in the 2.4 GHz band.
Although it is not necessary to have a license for radio station to use the wireless
card, fully understand the following instructions:
Do not use the cards near other sources of radio
emissions.
The following devices may use the same frequencies that are used by the
wireless card. If the wireless card is used near such devices, radio interference
may prevent successful communication,...

77 Notes for use
Radio emissions from the wireless card will not travel
through steel framework, metal sheets or concrete.
It is not possible to keep communication through walls or floors made of
reinforcing steel bars, metals or concrete although it is possible to keep
communication through walls and floors made of wood or glass (excluding glass
reinforced with metal wires). 

8
N5HBD0000024
Notes for use
Available channels
The channels (frequency bandwidth) that are available for the wireless card to
use will vary depending on the country or area where the wireless card is being
used. Refer to the following table as a guide.
Country / Area
Japan
USAARIB
STD33 &
T66
FCC part 15
22
231~14
1~112 412 MHz~
2 484 MHz
2 412 MHz~
2 462 MHz
Canada IC
Taiwan
Malaysia
UK, Germany, France,
Italy, Belgium, Austria,
Sweden, Norway,
Denmark, Switzerland,
Holland, Finland,
Portugal, Greece,...

9
Wireless Manager3.0
Wireless LAN Driver
Typical applications of network functions / SD Memory Card 
For Wireless Easy
Connection,
see page 21
For Network settings,
see page 25
For Installation of
software,
see page14Projecting images from the personal
computer by wireless
Projecting images from SD card using Web
browser controlSee page 66
Examples of use of network functions
SD Memory Card
Controlling the projector using Web
browser controlFor Wireless Easy
Connection,
see page 21
For Network...

10
The supplied Wireless Manager 3.0 allows the user to
transfer image data from the personal computer to the
SD card inserted in the projector and to record the data
on the card. Thus the user can project images
changing very quickly to desired ones. The Web browser allows the user to access the
projector and to project the image data stored on the
SD Memory card inserted in the projector.
Transferring image data from personal
computer to the projector and recording
them onto the SD Memory card inserted...