Panasonic Part For Network Functions And SD Memory Card Functions PT-L735NTE Manual

41
Presentation mode
When the user specifies a folder name in the folder selection at the left top, the
images in the folder will be listed in thumbnails if the folder contains image file(s)
(JPEG, PNG). If the system is in “PowerPoint →
Presentation” mode, the folder(s) of
converted images will be automatically selected.
PowerPoint Presentation mode
This function converts PowerPoint files (*.ppt) into image files so that they may be
transmitted to the projector.
From startup menu, execute [PowerPoint...

42
Presentation mode
Check [Presentation mode] and press the [Send] button.
When an image is sent, the next image will be automatically selected. In addition,
images can be changed over without delay of time because the next image has been
sent to the projector in advance. Furthermore, the projector cannot be connected by
other personal computers because it is already monopolized.
Progress bar
The bar chart indicates the progress while the image is transferred to the projector.
Switching display mode...

43
Re-display:
This function updates images to the list of the latest thumbnail images. If any
image in a folder has undergone edit by Explorer etc., for example, the re-display
button will reflect the result in the thumbnail viewing frame.
Automatic play:
This function will project the images in the folder one after another at constant
time intervals in turn from the first one to the last.
Automatic play starts with the currently selected thumbnail image. During
automatic play, the [Automatic play]...

44
Other functions
Searching projector
This function is not required when Simple Connection
is used. The function becomes necessary when
Simple Connection is not used or if two or more
projectors are used.
Go to [Option] and specify the projector in
[Selection of projector].
[Search]:
The user can use this function to search the
projectors that are available for connection.
However, projectors subject to search are limited
to those within the same network.
Projectors that are not powered cannot be...

45
Displaying the sender, senders name
Checkmark [Show the sender] and enter the name in [Sender].
In meeting mode, the entered [Sender’s name] will be shown in combination at the
right bottom of image sent to the projector. The above information is not displayed in
live mode or in presentation mode. If [Presentation mode] is not checkmarked in
presentation mode, the information is displayed on each image transmission.
Setting a shortcut key
Go to [Option] and select [Others].
[Live mode]:
This function...

46
Use of Web browser control
Browsing software (Internet Explorer etc) can be used to access the projector and
remote-control the projector from the personal computer, or to control the SD
Memory Card inserted in the projector.
Settings on the projector
Web control 
ON: enables Web browser control.
OFF: disables Web browser control.
Web power supply
ON: enables to turn on the lamp of the projector by Web browser control when
the system is on standby.
OFF: disables to turn on the lamp of the projector by...

47
Use of Web browser control
Settings on the personal computer
Notes:
•  If Simple Connection is used, settings will be made automatically.
(Internet Explorer Ver.6.0 or superior is needed, though)
•  If a proxy server is already used, set the IP address of the projector to which
connection is made as an exception for not using a proxy server in [Advanced].
Note:
For Netscape, go to [Edit] →
[Setting] →
[Details] and enable JavaScript.
In Security, set the security level
to the Default level. Or...

48
Operation of Web browser control
Starting Web browser control
Start the browser (Microsoft Internet Explorer is used as an example here), and enter
the IP address assigned to the projector.
Web browser control will be started.
Top screen
Note:
Web browser control can also be started from Wireless Manager 3.0.
While Wireless Manager 3.0 is running, right-click the icon shown on the task bar,
select and left-click  Remote Control.The Web browser control can also be started
by pressing the [CTRL] + [H]...

49
Projector control
Click Projector control in the menu.
The user can make various settings of the projector.
Basic control screen
Option control screen 
Notes:
• If the power supply has been turned ON, the screen will be closed for a moment.
Confirming the lamp is lighting, then enter into the top screen again.
• It may happen that connection to the projector is unsuccessful immediately after
the power is turned ON. Then, wait for a moment and try connection again.
• If Web control is not set to ON in...

50
Monitor information screen
When power is turned ON:When the system is in Web standby state:
Note:
Monitor information is updated at regular intervals. If you go to Display and press
the Refresh button, you can check the current and accurate information. 
Use of Web browser control