Panasonic Part For Network Functions And SD Memory Card Functions PT-L735NTE Manual

31
For Windows Me/98SE:
An example screen of Windows Me is shown below.
(1) Right-click [My network] and open the Properties.
(2) Select [Panasonic Wireless LAN PC Card] and click
[Properties].
(3) Enter the IP address of the same segment as the IP
address that was set for the projector.
(4) Enter the same value as the subnet mask that was
set for the projector.
(5) Set the gateway (infrastructure mode only), click [OK]
and return to the previous screen.
(6) Click [OK].
(7) Click [Yes].
Network setting 

32
For Windows CE:
The diagram below shows an example screen of Personal Digital Assistant (PDA).
However, different screens may be found depending on manufacturers and models:
typical settings when the projector is just shipped from the factory or when Simple
Connection is turned ON.
(1) On  a PDA, go to [Settings] →
[Connect To] →
[Network adaptor], then select
[Gemtek Wireless LAN PC Card] and click [Properties].
(2) Check [Use specified IP address] and set the address of the same group as the...

33
21
22
23
24
25
26
27
28
29
2a
2b
2c
2d
2e
2f!

#
%
&

(
)
+
’
-
.
/
30
31
32
33
34
35
36
37
38
39
3a
3b
3c
3d
3e
3f0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?40
41
42
43
44
45
46
47
48
49
4a
4b
4c
4d
4e
4f@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O50
51
52
53
54
55
56
57
58
59
5a
5b
5c
5d
5e
5fP
Q
R
S
T
U
V
W
X
Y
Z
[
]
ˆ
—60
61
62
63
64
65
66
67
68
69
6a
6b
6c
6d
6e
6f`
a
b
c
d
e
f
h
i
j
k
l
m
n
o70
71
72
73
74
75
76
77
78
79
7a
7b
7c
7d
7ep
q
r
s
t
u
v
w
x
y
z
|
Network setting 

34
Network setting
Settings for use of optional wireless card (ET-CDWL2E)
For Windows XP:
No dedicated utility software is required. For details, see the manual for Windows XP.
(1) Turn ON the power supply of the projector.
(2) Go to [Start] →
[Programs] →
[Connect To] →
[Show all connections] and select
[Wireless network connection].
(3) Right-click the [Panasonic Wireless LAN PC Card]
icon and select [Show available wireless networks].
A wireless network connection screen will appear.
(4) From the...

35
For Windows 2000/Me/98SE:
(1) Double-click the resident icon at the right bottom of the
PC screen.
This activates the utility software.
(2) Click the item of [Profile Setting] and click [Add].
(3) Enter the set name of the network, click [Next] and
enter the network name (the SSID of the projector
with which you want to make connection; selection on
factory shipping is Panasonic Projector).
Network setting
Notes:
Do not use the utility software when the system is in Simple Connection. Using it
may...

36
Notes:
• The communicate mode is not compatible with the ad
hoc mode. Select either peer-to-peer (802.11 ad hoc)
or Access Point (infrastructure).
• Some other cards than the optional item (ET-
CDWL2E) are compatible only with ad hoc mode.
Such cards cannot be used.
• To make setting for encryption (WEP), select 64 (40)
bits or 128 bits from [Off] and click [Next]. If you do
not want to use it, select [Off].
• The user may select characters or hexadecimals for
WEP entry.
Character entry: five...

37
For Windows CE:
The diagram below shows an example screen of Personal Digital Assistant (PDA).
However, different screens may be found depending on manufacturers and models:
typical settings when the projector is just shipped from the factory or when Simple
Connection is turned ON.
(1) On  a PDA, go to [Start] →
[Settings] →
[System],
and select [Wireless Settings].
(2) Set Mode to [802.11 Ad Hoc] and set SSID to
[Panasonic Projector] and click [OK]. Note:
If [Wireless Settings] does not appear, make...

38
Use of Wireless Manager 3.0
Live mode
Start-up
Go to [Start] →[All Programs] →[Wireless Manager], and
select [Wireless Manager 3.0]
Select the function you want to use in the window when it appears as shown below.
Images on the personal computer screen are directly transferred to the projector.
Since a single personal computer occupies the projector in this mode, the wireless
card does not allow other personal computer(s) to connect to the projector.
Selecting the transfer mode
Right-click the...

39
Use of Wireless Manager 3.0
In live mode
The colour of icon changes to green from blue, which is normal, and a checkmark is
given to “Live mode” of the task tray.
Quitting and resuming live mode
Click “Live mode” on the task tray. It toggles between Quit and Resume.
Alternatively, double-clicking the resident icon will help you do this.
Note:
The display speed in live mode depends on the CPU performance of the personal
computer. If the display speed is too slow, select another transfer mode, or use a...

40
Selection of capture format
This function allows selection of format when the image is captured.
[PNG]:
The image quality is not deteriorated, but this format is not suitable for natural
pictures.
[JPEG]:
This compression format is suitable for natural pictures. However, this is not
suited to images that contain many characters because of remarkable quality
deterioration. Further, only JPEG allows the user to adjust the image quality
optionally.
[BMP]:
This format does not use compression, and the...