Panasonic Network Disk Recorder Wjnd300a Setup Instructions

61
Setup items
[Manufacturer]
Select the manufacturer of the camera.
[MODEL/COMPRESSION]
Select the model of the camera and the image compres-
sion method.
Notes:
•When the [SETUP] button is clicked after changing
only the compression method, the set recording
rate/transmission rate will be automatically changed
as follows.
•When changed from MPEG-4 to JPEG or M-
JPEG, they will be 1 ips.
•When changed from JPEG or M-JPEG to
MPEG-4, they will be I-Frame.
•When the [SETUP] button is clicked after...

62
Settings of the sequential display of images from cameras [Sequence Setup]
Perform the settings for the sequential display of live images.
Screenshot 1
Click the [Camera] button in the setup menu (Advanced)
and then click Sequence Setup to display the
Sequence Setup window.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Settings of the title of the camera group...

63
Setup items
[The Method of Sequence]
Select SPOT or 4 Screens for The Method of
Sequence.
[SPOT] [4 Screens]
When the [SETUP] button for the selected method is
clicked the following window will be displayed. Perform
the settings on this window.  Click the [SET] button after
completing the settings, and close the window by click-
ing the [×] button at the top right of the window.
Note:
When the image compression method of the camera
selected for a camera channel is MPEG-4, the
respective sequence step...

64
Settings for Communication with other Devices [Comm]
Perform the network settings such as settings of the IP address of this unit and gateway address.
The following are the descriptions of how to perform the required settings for communicating with PCs.
Basic network settings [Basic Setup]
Basic network settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click Basic Setup. The Basic Setup window
will be displayed. 
Step 1
Perform the...

65
[Port Forwarding Setup]
Select ON or OFF to determine whether or not to set
the port forwarding.
The camera setup menu can be displayed only when
ON is selected for Port Forwarding on the setup
menu (Advanced) (Comm - Basic Setup - Port
Forwarding).
[Port Setup]
Set the port numbers used to connect each camera.
HTTP Port Number
Specify the HTTP port number to be used to send
images from the unit. A number from 1 - 65535 is avail-
able. It is unnecessary to change it for normal use.
Notes:
•Depending...

66
Basic settings relating to DNS [DNS Setup]
Basic network DNS settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click DNS Setup to display the DNS Setup
window.
Step 1
Perform the settings for the following items. 
DNS Setup
Select MANUAL or AUTO to enable IP address
searching by the host name using the DNS. Select
OFF when not using the DNS. 
Selecting AUTO is available only when ON is select-
ed for DHCP (using the DHCP server)....

67
Basic network settings relating to DDNS [DDNS Setup]
Basic network DDNS settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click DDNS Setup to display the DDNS
Setup window.
Step 1
Perform the settings for the following items.
DDNS Setup
Select ON or OFF to determine whether or not to use
the DDNS (Dynamic Domain Name Server). 
When ON is selected, perform the following settings. 
User Name
Enter a user name registered in the DDNS....

68
Basic settings relating to the proxy server [Proxy Setup]
Basic network proxy settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click Proxy Setup to display the Proxy
Setup window.
Step 1
Perform the settings for the following items.
Proxy Setup
Select ON or OFF to determine whether or not to use
the proxy server. 
When ON is selected, perform the following settings. 
Server Address
Enter a proxy server address. Enter up to 255...

69
Perform the settings for SNMP network [SNMP Setup]
Perform the settings for the SNMP. Perform the settings for the status check of the unit, etc. by connecting the
SNMP manager.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click SNMP Setup to display the SNMP
Setup window. 
Step 1
Perform the settings for the following items.
COMMUNITY
Enter a name used for SNMP authentication in alphanu-
meric characters. Enter up to 32 alphanumeric charac-
ters.
CONTACT
Enter the mail...

70
Perform the settings for the time adjustment of a network [NTP Setup]
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click NTP Setup to display the NTP Setup
window.
Step 1
Perform the settings for the following items.
Time Adjustment
Select ON or OFF to determine whether or not to adjust
the time according to the NTP server.
NTP Server Address
Enter the NTP server address when adjusting the time
using the NTP server. Enter up to 255 alphanumeric
characters including...