Panasonic Network Disk Recorder Wjnd300a Setup Instructions

71
Perform the settings for the FTP server [FTP Setup]
Perform the settings for the FTP server.
Settings for transmitting images from a camera connected to this unit to a designated FTP server can be performed
with the FTP Setup menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click FTP Setup. The FTP Setup window
will be displayed. 
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the...

72
File Name
Perform the settings for the rules about the file name to
be sent.
Select whether to TIME & DATE BASE or SERIAL
NUMBER.
Interval
Enter a number for transmission interval. Enter a num-
ber (1-1440) for transmission interval, and select
whether it will be s (seconds) or m (minutes) for the
interval unit.
Channel to Send
Select a camera channel from which images will be sent
periodically.  Images from the checked camera channel
will be sent to the FTP server.
Note:
When the image compression...

73
Perform the settings for mail notification [Mail Setup]
Perform the settings relating to the alarm mail function, the warning report mail function and the error mail function
(refer to the Operating Instructions (PDF)).
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click Mail Setup to display the Mail Setup
window.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after...

74
Send to
Enter the mail addresses of the recipient of the alarm
mail and the warning report mail. Enter the mail
addresses of the recipients for Address1 - Address4.
Enter up to 255 alphanumeric characters including
hyphens (-), periods (.) and at mark (@). Up to 4 desti-
nations can be registered.
Check the desired mail type (warning/alarm) to be sent.From Address
Enter the mail address of a sender. Entered mail
addresses will be displayed in the From (sender) line.
Enter up to 127 alphanumeric...

75
Settings Relating to the User Authentication [User Mng.]
Perform the settings for the user authentication/host authentication to restrict access this unit from PCs. It is possible
to restrict access this unit from users/hosts (PCs) by registering users and hosts (PCs) who can access this unit in
advance when ON is selected for the user authentication and the host authentication.
Settings to enable/disable the user authentication/host authentication [Basic Setup]
Select ON or OFF to determine whether...

76
Edit information of the registered administrator [Administrator Edit]
It is possible to edit the registered administrator information such as the password, operational level, etc. 
Screenshot 1
Click the [User Mng.] button in the setup menu
(Advanced) and then click Administrator Edit. The
Administrator Edit window will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing...

77
Setup items
USER ID
Enter a user ID. Enter 4 to 14 alphanumeric characters
for a user ID.
Password
Enter a password. Enter 4 to 8 alphanumeric characters
for a password.
Notes:
•Set a unique password, not something that would be
easily guessed by a third person. The password also
should be memorable.
•Up to 32 users can be registered.
Level
Select a user level from the following. Operable func-
tions for each level can be set in the User Level menu
(page 80).
LV1/LV2/LV3/LV4
Priority
Perform the...

78
Edit/delete registered user information [User Edit/Delete]
Edit or delete registered user information.
Screenshot 1
Click the [User Mng.] button in the setup menu
(Advanced) and then click User Edit/Delete. The User
Edit/Delete window will be displayed. 
Step 1
Click the [i] button to select the desired user informa-
tion to be edited or deleted.
Step 2
•Click the [EDIT] button to edit the selected user
information.
The editing window will be displayed with informa-
tion of the registered user. Edit...

79
Setup items
Host IP Address
Enter an IP address. Enter 4 units from the decimal
numbers (0-254). 
Notes:
•Entering * validates all numbers.
•It is impossible to register 0.0.0.0 or *.*.*.*.
Level
Select a user level from the following. Operable func-
tions for each level can be set in the User Level menu
(page 80).
LV1/LV2/LV3/LV4
Priority
Assign a priority from 1 (lowest priority) to 16 (highest
priority) to every host.Default Screen
Select a startup display to be displayed after login from
the...

80
Setting of operation level [User Level]
Assign a level (LV1/LV2/LV3/LV4) to every user to restrict operable functions.
Screenshot 1
Click the [User Mng.] button in the setup menu
(Advanced) and then click User Level. The User
Level window will be displayed. 
Step 1
Check the desired functions that a user may operate. To
stop a user from operating certain functions, do not
check the respective function.
Refer to page 81 for further information about each
function.
Step 2
Click the [SET] button after...