Home
>
Panasonic
>
Recording Equipment
>
Panasonic Network Disk Recorder Wjnd300a Setup Instructions
Panasonic Network Disk Recorder Wjnd300a Setup Instructions
Here you can view all the pages of manual Panasonic Network Disk Recorder Wjnd300a Setup Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41
Screenshot 3
The submenus respective to the clicked button on the
setup menu (Advanced) will be displayed.
Step 3
Click the desired submenu on the setup menu
(Advanced).
Screenshot 4
The settings page of the selected submenu will be dis-
played in the image display area.
Step 4
Perform the settings for each item.
Click the [SET] button after completing the settings.
When the [CLEAR] button is clicked, the contents of the
settings will be cleared.
Step 5
To complete the settings, click the...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-40.png "Page 41
41
Screenshot 3
The submenus respective to the clicked button on the
setup menu (Advanced) will be displayed.
Step 3
Click the desired submenu on the setup menu
(Advanced).
Screenshot 4
The settings page of the selected submenu will be dis-
played in the image display area.
Step 4
Perform the settings for each item.
Click the [SET] button after completing the settings.
When the [CLEAR] button is clicked, the contents of the
settings will be cleared.
Step 5
To complete the settings, click the...")
41 Screenshot 3 The submenus respective to the clicked button on the setup menu (Advanced) will be displayed. Step 3 Click the desired submenu on the setup menu (Advanced). Screenshot 4 The settings page of the selected submenu will be dis- played in the image display area. Step 4 Perform the settings for each item. Click the [SET] button after completing the settings. When the [CLEAR] button is clicked, the contents of the settings will be cleared. Step 5 To complete the settings, click the...
Page 42
![Page 42
42
Perform the Settings for the System [System]
Perform the settings for the system of this unit.
Perform the basic settings for the system [Basic Setup]
Perform the settings for the basic operations of this unit.
Screenshot 1
Click the [System] button in the setup menu (Advanced)
and then click Basic Setup. The Basic Setup window
will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-41.png "Page 42
42
Perform the Settings for the System [System]
Perform the settings for the system of this unit.
Perform the basic settings for the system [Basic Setup]
Perform the settings for the basic operations of this unit.
Screenshot 1
Click the [System] button in the setup menu (Advanced)
and then click Basic Setup. The Basic Setup window
will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button...")
42 Perform the Settings for the System [System] Perform the settings for the system of this unit. Perform the basic settings for the system [Basic Setup] Perform the settings for the basic operations of this unit. Screenshot 1 Click the [System] button in the setup menu (Advanced) and then click Basic Setup. The Basic Setup window will be displayed. Step 1 Perform the settings for each item. Refer to the following for further information about the settings for each item. Step 2 Click the [SET] button...
Page 43
![Page 43
43
GO TO LAST before
Select a time to be skipped to when the [GO TO LAST]
button is clicked during playback from the following.
5 s/10 s/30 s/1 min/5 min
Perform the settings for the time and date [Time & Date]
Perform the settings for the time and date.
Screenshot 1
Click the [System] button in the setup menu (Advanced)
and then click Time & Date. The Time & Date win-
dow will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-42.png "Page 43
43
GO TO LAST before
Select a time to be skipped to when the [GO TO LAST]
button is clicked during playback from the following.
5 s/10 s/30 s/1 min/5 min
Perform the settings for the time and date [Time & Date]
Perform the settings for the time and date.
Screenshot 1
Click the [System] button in the setup menu (Advanced)
and then click Time & Date. The Time & Date win-
dow will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for...")
43 GO TO LAST before Select a time to be skipped to when the [GO TO LAST] button is clicked during playback from the following. 5 s/10 s/30 s/1 min/5 min Perform the settings for the time and date [Time & Date] Perform the settings for the time and date. Screenshot 1 Click the [System] button in the setup menu (Advanced) and then click Time & Date. The Time & Date win- dow will be displayed. Step 1 Perform the settings for each item. Refer to the following for further information about the settings for...
Page 44
![Page 44
44
Setup items
Date Format
Select a date format to be displayed from the following.
(Ex. April 1, 2007)
YY.MM.DD:07.04.01
MMM.DD.YY:APR.01.07
DD.MMM.YY:01.APR.07
Time Format
Select a time format to be displayed from the following.
(Example for 3 o’clock in the afternoon)
12h:3:00:00PM
24h:15:00:00
Time & Date
Adjust the current time and date.
Select numbers for the year, month, day, hour and
minute, and then click the [SET] button.
Important:
Live images will turn to black screen and recording
will...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-43.png "Page 44
44
Setup items
Date Format
Select a date format to be displayed from the following.
(Ex. April 1, 2007)
YY.MM.DD:07.04.01
MMM.DD.YY:APR.01.07
DD.MMM.YY:01.APR.07
Time Format
Select a time format to be displayed from the following.
(Example for 3 o’clock in the afternoon)
12h:3:00:00PM
24h:15:00:00
Time & Date
Adjust the current time and date.
Select numbers for the year, month, day, hour and
minute, and then click the [SET] button.
Important:
Live images will turn to black screen and recording
will...")
44 Setup items Date Format Select a date format to be displayed from the following. (Ex. April 1, 2007) YY.MM.DD:07.04.01 MMM.DD.YY:APR.01.07 DD.MMM.YY:01.APR.07 Time Format Select a time format to be displayed from the following. (Example for 3 o’clock in the afternoon) 12h:3:00:00PM 24h:15:00:00 Time & Date Adjust the current time and date. Select numbers for the year, month, day, hour and minute, and then click the [SET] button. Important: Live images will turn to black screen and recording will...
Page 45
![Page 45
45
Summer Time (Daylight Savings) Table
Set the start (ON)/end (OFF) date and time for summer
time.
The following window will be displayed when the
[SETUP] button is clicked. Click the [SET] button after
completing the settings, and close the window by click-
ing the [×] button at the top right of the window.
Enter the start time and date and the end time and date
of summer time. Enter the last 2 digits of the year.
Up to 10 times and dates for switching to summer time
can be set.](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-44.png "Page 45
45
Summer Time (Daylight Savings) Table
Set the start (ON)/end (OFF) date and time for summer
time.
The following window will be displayed when the
[SETUP] button is clicked. Click the [SET] button after
completing the settings, and close the window by click-
ing the [×] button at the top right of the window.
Enter the start time and date and the end time and date
of summer time. Enter the last 2 digits of the year.
Up to 10 times and dates for switching to summer time
can be set.")
45 Summer Time (Daylight Savings) Table Set the start (ON)/end (OFF) date and time for summer time. The following window will be displayed when the [SETUP] button is clicked. Click the [SET] button after completing the settings, and close the window by click- ing the [×] button at the top right of the window. Enter the start time and date and the end time and date of summer time. Enter the last 2 digits of the year. Up to 10 times and dates for switching to summer time can be set.
Page 46
![Page 46
46
Submenu
Time TableSetup items Status
FTP SEND BY PERIODIC TIMER Disabled
WARNING REPORT MAIL Disabled
FTP ALARM SENDING Disabled
ALARM MESSAGE Functions normally (Fixed to ON.)
Panasonic Alarm Protocol Disabled
ALARM MAIL Disabled
Functions for Recording [Recording]
Perform the settings for recording. Perform the basic settings for recording and the settings for emergency recording.
Basic settings for recording [REC Setup]
Perform the basic settings for recording.
Screenshot 1
Click the [Recording]...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-45.png "Page 46
46
Submenu
Time TableSetup items Status
FTP SEND BY PERIODIC TIMER Disabled
WARNING REPORT MAIL Disabled
FTP ALARM SENDING Disabled
ALARM MESSAGE Functions normally (Fixed to ON.)
Panasonic Alarm Protocol Disabled
ALARM MAIL Disabled
Functions for Recording [Recording]
Perform the settings for recording. Perform the basic settings for recording and the settings for emergency recording.
Basic settings for recording [REC Setup]
Perform the basic settings for recording.
Screenshot 1
Click the [Recording]...")
46 Submenu Time TableSetup items Status FTP SEND BY PERIODIC TIMER Disabled WARNING REPORT MAIL Disabled FTP ALARM SENDING Disabled ALARM MESSAGE Functions normally (Fixed to ON.) Panasonic Alarm Protocol Disabled ALARM MAIL Disabled Functions for Recording [Recording] Perform the settings for recording. Perform the basic settings for recording and the settings for emergency recording. Basic settings for recording [REC Setup] Perform the basic settings for recording. Screenshot 1 Click the [Recording]...
Page 47
47 Program Special DaysProgram 1 - 4 The settings performed on the setup menu (Advanced) will not be validated. The settings performed on the setup menu (Quick) will be validated. * Disabled Submenu Setup items Status * To perform the schedule recording, perform the settings for Time Table and Program. •When QUICK is selected, MPEG-4 live image will not be displayed and recording will not be performed. Recording Select ON or OFF to record or not record. OFF:No recording will be performed. ON:Recording...
Page 48
![Page 48
48
Settings for emergency recording [Emergency REC]
Perform the settings for emergency recording such as the recording time or recording rate. Refer to the provided
operating instructions for further information about emergency recording.
Screenshot 1
Click the [Recording] button in the setup menu
(Advanced) and then click Emergency REC. The
Emergency REC window will be displayed.
Step 1
Perform the settings for each item.
Recording Duration
Perform the settings for emergency recording such as
the...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-47.png "Page 48
48
Settings for emergency recording [Emergency REC]
Perform the settings for emergency recording such as the recording time or recording rate. Refer to the provided
operating instructions for further information about emergency recording.
Screenshot 1
Click the [Recording] button in the setup menu
(Advanced) and then click Emergency REC. The
Emergency REC window will be displayed.
Step 1
Perform the settings for each item.
Recording Duration
Perform the settings for emergency recording such as
the...")
48 Settings for emergency recording [Emergency REC] Perform the settings for emergency recording such as the recording time or recording rate. Refer to the provided operating instructions for further information about emergency recording. Screenshot 1 Click the [Recording] button in the setup menu (Advanced) and then click Emergency REC. The Emergency REC window will be displayed. Step 1 Perform the settings for each item. Recording Duration Perform the settings for emergency recording such as the...
Page 49
![Page 49
49
Functions for Events [Event]
Perform the settings for event actions of each event type (site alarm, terminal alarm and command alarm). Refer to
the provided operating instructions for further information about each event type.
Basic settings for event actions [Basic Setup]
Perform the settings relating to event actions such as the alarm output duration and the buzzer sound duration of
each camera channel at an event occurrence (site alarm, terminal alarm, command alarm).
Screenshot 1
Click the [Event]...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-48.png "Page 49
49
Functions for Events [Event]
Perform the settings for event actions of each event type (site alarm, terminal alarm and command alarm). Refer to
the provided operating instructions for further information about each event type.
Basic settings for event actions [Basic Setup]
Perform the settings relating to event actions such as the alarm output duration and the buzzer sound duration of
each camera channel at an event occurrence (site alarm, terminal alarm, command alarm).
Screenshot 1
Click the [Event]...")
49 Functions for Events [Event] Perform the settings for event actions of each event type (site alarm, terminal alarm and command alarm). Refer to the provided operating instructions for further information about each event type. Basic settings for event actions [Basic Setup] Perform the settings relating to event actions such as the alarm output duration and the buzzer sound duration of each camera channel at an event occurrence (site alarm, terminal alarm, command alarm). Screenshot 1 Click the [Event]...
Page 50
![Page 50
50
Settings relating to the terminal alarm [Terminal Setup]
Set event actions at a terminal alarm occurrence for each camera channel.
Screenshot 1
Click the [Event] button in the setup menu (Advanced)
and then click Terminal Setup to display the Terminal
Setup window.
Step 1
Perform the settings for the following items for each ter-
minal alarm channel.
[REC CAM]
Performs the settings for a camera channel used for
recording.
[PRESET]
Enter a preset position (blank, 1-256) to which the cam-
era will move...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-49.png "Page 50
50
Settings relating to the terminal alarm [Terminal Setup]
Set event actions at a terminal alarm occurrence for each camera channel.
Screenshot 1
Click the [Event] button in the setup menu (Advanced)
and then click Terminal Setup to display the Terminal
Setup window.
Step 1
Perform the settings for the following items for each ter-
minal alarm channel.
[REC CAM]
Performs the settings for a camera channel used for
recording.
[PRESET]
Enter a preset position (blank, 1-256) to which the cam-
era will move...")
50 Settings relating to the terminal alarm [Terminal Setup] Set event actions at a terminal alarm occurrence for each camera channel. Screenshot 1 Click the [Event] button in the setup menu (Advanced) and then click Terminal Setup to display the Terminal Setup window. Step 1 Perform the settings for the following items for each ter- minal alarm channel. [REC CAM] Performs the settings for a camera channel used for recording. [PRESET] Enter a preset position (blank, 1-256) to which the cam- era will move...