Home
>
Panasonic
>
Recording Equipment
>
Panasonic Network Disk Recorder Wjnd300a Setup Instructions
Panasonic Network Disk Recorder Wjnd300a Setup Instructions
Here you can view all the pages of manual Panasonic Network Disk Recorder Wjnd300a Setup Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Perform the settings for site alarm [Site Alarm Setup]
Perform the settings relating to the site alarm such as the setting to validate or invalidate the original alarm from
cameras, the port number used for receiving the original alarm, and the event actions for each camera channel at an
original alarm occurrence.
Screenshot 1
Click the [Event] button in the setup menu (Advanced)
and then click Site Alarm Setup to display the Site
Alarm Setup window.
Step 1
Perform the settings for each item.
Site...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-50.png "Page 51
51
Perform the settings for site alarm [Site Alarm Setup]
Perform the settings relating to the site alarm such as the setting to validate or invalidate the original alarm from
cameras, the port number used for receiving the original alarm, and the event actions for each camera channel at an
original alarm occurrence.
Screenshot 1
Click the [Event] button in the setup menu (Advanced)
and then click Site Alarm Setup to display the Site
Alarm Setup window.
Step 1
Perform the settings for each item.
Site...")
51 Perform the settings for site alarm [Site Alarm Setup] Perform the settings relating to the site alarm such as the setting to validate or invalidate the original alarm from cameras, the port number used for receiving the original alarm, and the event actions for each camera channel at an original alarm occurrence. Screenshot 1 Click the [Event] button in the setup menu (Advanced) and then click Site Alarm Setup to display the Site Alarm Setup window. Step 1 Perform the settings for each item. Site...
Page 52
![Page 52
52
Perform the settings for command alarm [Command Alarm]
Set event actions at a command alarm occurrence for each camera channel.
Screenshot 1
Click the [Event] button in the setup menu (Advanced)
and then click Command Alarm to display the
Command Alarm window.
Step 1
Perform the settings for the following items for each
command alarm channel.
[REC CAM]
Performs the settings for a camera channel used for
recording.
[PRESET]
Enter a preset position (blank, 1-256) to which the cam-
era will move at an...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-51.png "Page 52
52
Perform the settings for command alarm [Command Alarm]
Set event actions at a command alarm occurrence for each camera channel.
Screenshot 1
Click the [Event] button in the setup menu (Advanced)
and then click Command Alarm to display the
Command Alarm window.
Step 1
Perform the settings for the following items for each
command alarm channel.
[REC CAM]
Performs the settings for a camera channel used for
recording.
[PRESET]
Enter a preset position (blank, 1-256) to which the cam-
era will move at an...")
52 Perform the settings for command alarm [Command Alarm] Set event actions at a command alarm occurrence for each camera channel. Screenshot 1 Click the [Event] button in the setup menu (Advanced) and then click Command Alarm to display the Command Alarm window. Step 1 Perform the settings for the following items for each command alarm channel. [REC CAM] Performs the settings for a camera channel used for recording. [PRESET] Enter a preset position (blank, 1-256) to which the cam- era will move at an...
Page 53
![Page 53
53
Settings for the Recording/Event Schedule [Schedule]
Perform the settings for the recording schedules by designating a day of the week and time.
It is possible to divide a day into 6 time zones and create a schedule by assigning programs to each time zone. Up
to 4 programs can be created. Perform the settings for programs such as recording rate, recording duration, etc.
It is possible to create special days apart from the normal schedule, and a recording program of another day of the
week can be...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-52.png "Page 53
53
Settings for the Recording/Event Schedule [Schedule]
Perform the settings for the recording schedules by designating a day of the week and time.
It is possible to divide a day into 6 time zones and create a schedule by assigning programs to each time zone. Up
to 4 programs can be created. Perform the settings for programs such as recording rate, recording duration, etc.
It is possible to create special days apart from the normal schedule, and a recording program of another day of the
week can be...")
53 Settings for the Recording/Event Schedule [Schedule] Perform the settings for the recording schedules by designating a day of the week and time. It is possible to divide a day into 6 time zones and create a schedule by assigning programs to each time zone. Up to 4 programs can be created. Perform the settings for programs such as recording rate, recording duration, etc. It is possible to create special days apart from the normal schedule, and a recording program of another day of the week can be...
Page 54
![Page 54
54
Screenshot 2
The Program Setup window will be displayed.
Step 2
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
When the [camera 17-32] button is clicked, the setting
window for camera 17-32 will be displayed.
Step 3
Click the [SET] button after completing the settings, and
close the window by clicking the [×] button at the top
right of the window.
Setup items
Copy the Other Program Setup
When it is necessary to copy the settings of...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-53.png "Page 54
54
Screenshot 2
The Program Setup window will be displayed.
Step 2
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
When the [camera 17-32] button is clicked, the setting
window for camera 17-32 will be displayed.
Step 3
Click the [SET] button after completing the settings, and
close the window by clicking the [×] button at the top
right of the window.
Setup items
Copy the Other Program Setup
When it is necessary to copy the settings of...")
54 Screenshot 2 The Program Setup window will be displayed. Step 2 Perform the settings for each item. Refer to the following for further information about the settings for each item. When the [camera 17-32] button is clicked, the setting window for camera 17-32 will be displayed. Step 3 Click the [SET] button after completing the settings, and close the window by clicking the [×] button at the top right of the window. Setup items Copy the Other Program Setup When it is necessary to copy the settings of...
Page 55
![Page 55
55
• Post-event recording (POST-EVENT)
1 - 10 s (in 1-second interval)/20 s/30 s/1 - 10 min
(in 1-minute interval)/20 - 60 min (in 10-minutes
interval)
MANUAL:Recording will be performed while alarm
signals (site alarm, terminal alarm, command
alarm) are being supplied.
CONTINUE:Recording will not stop until the
[ALARM RESET] button is clicked.
Note:
When MANUAL is selected for DURATION
(recording duration), recording will be performed for
at least 8 seconds at an event occurrence as long as
the alarm...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-54.png "Page 55
55
• Post-event recording (POST-EVENT)
1 - 10 s (in 1-second interval)/20 s/30 s/1 - 10 min
(in 1-minute interval)/20 - 60 min (in 10-minutes
interval)
MANUAL:Recording will be performed while alarm
signals (site alarm, terminal alarm, command
alarm) are being supplied.
CONTINUE:Recording will not stop until the
[ALARM RESET] button is clicked.
Note:
When MANUAL is selected for DURATION
(recording duration), recording will be performed for
at least 8 seconds at an event occurrence as long as
the alarm...")
55 • Post-event recording (POST-EVENT) 1 - 10 s (in 1-second interval)/20 s/30 s/1 - 10 min (in 1-minute interval)/20 - 60 min (in 10-minutes interval) MANUAL:Recording will be performed while alarm signals (site alarm, terminal alarm, command alarm) are being supplied. CONTINUE:Recording will not stop until the [ALARM RESET] button is clicked. Note: When MANUAL is selected for DURATION (recording duration), recording will be performed for at least 8 seconds at an event occurrence as long as the alarm...
Page 56
![Page 56
56
Notes:
•Click the [Measurement] button after setting the recording rate/transmission rate by clicking the [SET] button.
•Do not change the settings in the process of the measurement.
•In the process of the measurement, recording, playback, live image display and copying will stop. Other users
currently accessing the unit will forcibly be logged out. They need to log in the unit after the measurement.
•The result value is the reference value. Depending on the network traffic, different result value may...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-55.png "Page 56
56
Notes:
•Click the [Measurement] button after setting the recording rate/transmission rate by clicking the [SET] button.
•Do not change the settings in the process of the measurement.
•In the process of the measurement, recording, playback, live image display and copying will stop. Other users
currently accessing the unit will forcibly be logged out. They need to log in the unit after the measurement.
•The result value is the reference value. Depending on the network traffic, different result value may...")
56 Notes: •Click the [Measurement] button after setting the recording rate/transmission rate by clicking the [SET] button. •Do not change the settings in the process of the measurement. •In the process of the measurement, recording, playback, live image display and copying will stop. Other users currently accessing the unit will forcibly be logged out. They need to log in the unit after the measurement. •The result value is the reference value. Depending on the network traffic, different result value may...
Page 57
![Page 57
57
Set the time zone and assign programs [Time Table]
Create recording timetables for each day of the week, and assign a recording program to each timetable. Up to 6
recording programs can be created for each day of the week.
Screenshot 1
Click the [Schedule] button in the setup menu
(Advanced) and then click Time Table to display the
Time Table window.
Step 1
Click the button of the desired day of the week.
Note:
When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel (the...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-56.png "Page 57
57
Set the time zone and assign programs [Time Table]
Create recording timetables for each day of the week, and assign a recording program to each timetable. Up to 6
recording programs can be created for each day of the week.
Screenshot 1
Click the [Schedule] button in the setup menu
(Advanced) and then click Time Table to display the
Time Table window.
Step 1
Click the button of the desired day of the week.
Note:
When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel (the...")
57 Set the time zone and assign programs [Time Table] Create recording timetables for each day of the week, and assign a recording program to each timetable. Up to 6 recording programs can be created for each day of the week. Screenshot 1 Click the [Schedule] button in the setup menu (Advanced) and then click Time Table to display the Time Table window. Step 1 Click the button of the desired day of the week. Note: When a signal is supplied from the ALARM/CON- TROL connector on the rear panel (the...
Page 58
![Page 58
58
Setup items
Copy the other Time Table
When it is necessary to copy the timetable of another
day of the week, select the desired day of the week and
click the [Copy] button.
New Time Table Setup
Perform the settings of the following item for each time
zone.
[START]
Set the start time of the time zone.
[END]
Set the end time of the time zone.
[Program]
Select the desired Program.
[MODE]
Select the alarm mode to be activated at an alarm
occurrence from the following.
ADM (Activity Detection...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-57.png "Page 58
58
Setup items
Copy the other Time Table
When it is necessary to copy the timetable of another
day of the week, select the desired day of the week and
click the [Copy] button.
New Time Table Setup
Perform the settings of the following item for each time
zone.
[START]
Set the start time of the time zone.
[END]
Set the end time of the time zone.
[Program]
Select the desired Program.
[MODE]
Select the alarm mode to be activated at an alarm
occurrence from the following.
ADM (Activity Detection...")
58 Setup items Copy the other Time Table When it is necessary to copy the timetable of another day of the week, select the desired day of the week and click the [Copy] button. New Time Table Setup Perform the settings of the following item for each time zone. [START] Set the start time of the time zone. [END] Set the end time of the time zone. [Program] Select the desired Program. [MODE] Select the alarm mode to be activated at an alarm occurrence from the following. ADM (Activity Detection...
Page 59
![Page 59
59
Perform the settings of recording programs for special days [Special Days]
Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to
30 days.
Perform the settings to specify dates as special days and apply a recording schedule to the specified special days.
Screenshot 1
Click the [Schedule] button in the setup menu
(Advanced) and then click Special Days to display the
Special Days window.
Step 1
Click the [i] button and select date to be set...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-58.png "Page 59
59
Perform the settings of recording programs for special days [Special Days]
Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to
30 days.
Perform the settings to specify dates as special days and apply a recording schedule to the specified special days.
Screenshot 1
Click the [Schedule] button in the setup menu
(Advanced) and then click Special Days to display the
Special Days window.
Step 1
Click the [i] button and select date to be set...")
59 Perform the settings of recording programs for special days [Special Days] Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to 30 days. Perform the settings to specify dates as special days and apply a recording schedule to the specified special days. Screenshot 1 Click the [Schedule] button in the setup menu (Advanced) and then click Special Days to display the Special Days window. Step 1 Click the [i] button and select date to be set...
Page 60
![Page 60
60
Settings Relating to Cameras [Camera]
Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings of
the group and the settings of the sequential display.
Perform the settings for network connection [NW Camera Setup]
Perform the network camera settings such as the camera IP address and the port number. It is possible to make this
unit detectable when failed to detect by the IP Quick Setup Tool.
Screenshot 1
Click the [Camera] button in the setup...](http://img.usermanuals.tech/thumb/58/69425/w300_wjnd300a_setup_en_om_d-59.png "Page 60
60
Settings Relating to Cameras [Camera]
Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings of
the group and the settings of the sequential display.
Perform the settings for network connection [NW Camera Setup]
Perform the network camera settings such as the camera IP address and the port number. It is possible to make this
unit detectable when failed to detect by the IP Quick Setup Tool.
Screenshot 1
Click the [Camera] button in the setup...")
60 Settings Relating to Cameras [Camera] Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings of the group and the settings of the sequential display. Perform the settings for network connection [NW Camera Setup] Perform the network camera settings such as the camera IP address and the port number. It is possible to make this unit detectable when failed to detect by the IP Quick Setup Tool. Screenshot 1 Click the [Camera] button in the setup...