Home > Panasonic > Recording Equipment > Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

Here you can view all the pages of manual Panasonic Network Disk Recorder Wj Nd200 Setup Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.

Page 81

81
•The ActiveX control is not installed in the PC. Install
the ActiveX control by referring to the following
page.
•Are the connected network cameras configured cor-
rectly?
Check the settings of the setup menu (Camera -
NW Camera Setup).
•Are the settings of the setup menu (Schedule -
Program - LIVE VIDEO) configured correctly?
Check the settings.
•Are the network settings of the cameras and the unit
configured correctly?
Check the settings of IP address, subnet mask and
default gateway for them.
•When...

Page 82

•Change the port number for the camera, and then
click the [SETUP] button again.
82
•Are the settings of the network camera set correctly?
Check the model of the set camera on the setup
menu (Camera - NW Camera Setup).
•When the image compression method of all cameras
in use is not the same, performance may become
lower. (Refresh of images will be unstable.)
•The configured settings for transmission rate/record-
ing rate may be beyond the maximum network perfor-
mance.
Lower the value/rate of the...

Page 83

83
•Click the information bar and select Install ActiveX
Control….
The Security Warning window will be displayed.
Click the [Install] button on the displayed Security
Warning window. •Click the information bar and select Always Allow
Pop-ups from This Site…. The dialog window saying
Allow pop-ups from this site? will be displayed. Click
the [Yes] button.
Solutions
When using a PC on which Windows XP Service Pack2 (SP2) is installed
The following may occur during operation when using a PC on which Windows...

Page 84

84
•Click Internet Options on the Tools menu of Internet
Explorer, and then click the [Security] tab. Then, click
the [Custom Level…] button to open the Security
Setting window. Under Miscellaneous, select
Enable for Allow script-initiated windows without
size or position constraints. Click the [OK] button.
The Warning window will be displayed. Click the
[Yes] button.
Solutions
–
An unnecessary status bar
or scroll bar is displayed on
the pop-up window.
Reference
pagesSymptom 

Page 85

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be
mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be
accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local...
Start reading Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

Related Manuals for Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

All Panasonic manuals