Panasonic Network Camera Wv Sud638 Operating Instructions

							5   About the network security
5.1  Equipped security functions The following security functions are featured in this camera.
Access restrictions by the host authentication and the user authentication
It is possible to restrict users from accessing the camera by setting the host authentication and/or the user
authentication to “On”. ( ®page 121, page 122)
Access restrictions by changing the HTTP port
It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port number.
( ® page 128)
Access encryption by the HTTPS function
It is possible to enhance the network security by encrypting the access to cameras using the HTTPS
function. ( ®page 144)
IMPORTANT
•Design and enhance security countermeasures to prevent leakage of information such as image data,
authentication information (user name and password), alarm E-mail information, FTP server
information, DDNS server information, etc. Perform the countermeasure such as access restriction
(using the user authentication) or access encryption (using the HTTPS function).
• After the camera is accessed by the administrator, make sure to close the browser for added security.
• Change the administrator password periodically for added security.
Note
•When user authentication  (authentication error) has failed to pass 8 times within 30 seconds using the
same IP address (PC), access to the camera will be denied for a while.
Operating Instructions31
5 About the network security    
						

							6   Display the setup menu from a PCThe settings of the camera can be configured on the setup menu.
IMPORTANT•The setup menu is only operable by users whose access level is “1. Administrator”. Refer to
page 121 for how to configure the access level.
6.1  How to display the setup menu 1.Display the “Live” page. ( ®page 8)
2. Click the [Setup] button on the “Live” page.
→ The window with the user name and password entry fields will be displayed.
32Operating Instructions
6 Display the setup menu from a PC   
						

							3.Click the [OK] button after entering the user name and the password.
→ The setup menu will be displayed. Refer to page 36 for further information about this menu.Operating Instructions33
6 Display the setup menu from a PC              
						

							6.2  How to operate the setup menu
Menu buttons
Setup page
1. Click the desired button in the frame on the left of the window to display the respective setup menu.
When there are tabs at the top of the  “Setup” page displayed in the frame on the right of the window, click
the desired tab to display and configure the setting items relating to the name of the tab.
2. Complete each setting item displayed in the frame on the right of the window.
3. After completing each setting item, click the [Set] button to apply them.
IMPORTANT
•When there are two or more [ Set] and [ Execute ] buttons on the page, click the respective button to the
edited setting item.
34Operating Instructions
6 Display the setup menu from a PC„
ƒ                          
						

							
When completing the setting items in field A, click the [Set] button ( B) below field ( A).
The edited settings in field  A will not be applied unless the [ Set] button  (B ) below field  (A ) is clicked.
In the same manner as above, click the [Set] button ( D) below field  C when completing the setting
items in field  C.
Operating Instructions35
6 Display the setup menu from a PCD
C
B
A   
						

							6.3  About the setup menu window
[Setup] button
Display the “Setup” page.
[Live] button
Display the “Live” page.
[Basic] button
Displays the “Basic” page. The basic settings such as time and date and camera title, and the settings
required to connect the camera to the Internet can be configured on the “Basic” page. ( ®page 38)
[Image/Audio] button
Displays the  “Image/Audio”  page. The settings relating to image quality, image capture size, etc. of JPEG/
H.264 camera images can be configured on the “Image/Audio” page. ( ®page 46)
[Multi-screen] button
Displays the “Multi-screen” page. The cameras from which images are to be displayed on a multi-screen
can be registered on the “Multi-screen” page. ( ®page 97)
36Operating Instructions
6 Display the setup menu from a PC„
ƒ … ‡
† ˆ Š ‹ Œ
‰  Ž         
						

							[Alarm] button
Displays the  “Alarm” page. The settings relating to alarm occurrences such as settings for the alarm action
at an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configured
on the “Alarm” page. ( ®page 99)
[User mng.] button
Displays the “User mng.” page. The settings relating to the authentication such as users and PCs
restrictions for accessing the camera can be configured on the “User mng.” page. ( ®page 121)
[Network] button
Displays the “Network” page. The network settings and the settings relating to DDNS (Dynamic DNS),
SNMP  (Simple Network Management Protocol), FTP  (File Transfer Protocol), the NTP server, and Diffserv
can be configured on the “Network” page. ( ®page 126)
[Schedule] button
Displays the “Schedule” page. On the “Schedule” page, it is possible to designate time zones to allow to
activate the VMD detection function. ( ®page 174)
[Extension unit] button
Displays the “Extension unit” page. The settings can be configured when using the front unit.
( ® page 181)
[Maintenance] button
Displays the “Maintenance” page. System log check, firmware upgrade, status check and initialization of
the setup menu can be carried out on the “Maintenance” page. ( ®page 182)
Camera title
The title of the camera whose settings are currently being configured will be displayed.
Setup page
Pages of each setup menu will be displayed. There are tabs for some setup menus.
Operating Instructions37
6 Display the setup menu from a PC         
						

							7   Configure the basic settings of the camera
[Basic]
The basic settings such as camera title, time and date, and the logs can be configured on the “Basic” page.
The “Basic” page has the [Basic] tab, and the [Internet] tab.
7.1  Configure the basic settings [Basic] Click the [Basic] tab on the “Basic” page. ( ®page 32, page 34)
The settings such as the camera title, time and date, etc. can be configured on this page.
[Language]
Select the language to initially display when the camera is accessed from the following.
Auto/English/Japanese/Italian/French/German/Spanish/Chinese/Russian/Portuguese
• Auto:  The language used by the browser is automatically selected. If the language used by the browser
is not supported by the camera, English is selected.
• Default:  Auto
The language displayed on the “Live” page can also be changed. ( ®page 10)
[Camera title]
Enter the title of the camera. Click the [Set] button after entering the title of the camera. The entered title will
be displayed in the “Camera title” field.
38Operating Instructions
7 Configure the basic settings of the camera [Basic]   
						

							•Available number of characters:  0 - 20 characters
• Unavailable characters:  " &
• Default:  The model No. is displayed.
[Date/time]
Enter the current time and date. When  “12h” is selected for  “Time display format ”,  “AM”  or “PM”  can be selected.
• Available range:  Jan/01/2013 00:00:00 - Dec/31/2035 23:59:59
IMPORTANT
•Use an NTP server when the more accurate time & date setting is required for the system operation.
( ® page 137)
[Time display format]
Select the time display format from “24h”, “12h” and “Off”. Enter the current hour reflecting this setting when
entering the current time and date for “Date/time”. To hide time and date, select “Off”.
• Default:  24h
[Date/time display format]
Select a date/time display format. When “2016/04/01 13:10:00” is set for “Date/time” after selecting “24h” for
“Date/time display format”, time & date will be respectively displayed as follows.
• DD/MM/YYYY:  01/04/2016 13:10:00
• MM/DD/YYYY:  04/01/2016 13:10:00
• DD/Mmm/YYYY:  01/Apr/2016 13:10:00
• YYYY/MM/DD:  2016/04/01 13:10:00
• Mmm/DD/YYYY:  Apr/01/2016 13:10:00
• Default:  Mmm/DD/YYYY
[NTP]
When “NTP >>” is clicked, the [Advanced] tab of the “Network” page will be displayed. ( ®page 137)
[Time zone]
Select a time zone corresponding to the location where the camera is in use.
• Default:  (GMT +09:00) Osaka, Sapporo, Tokyo
[Summer time (daylight saving)]
Select “In”, “Out” or “Auto” to determine whether or not to apply daylight saving time. Configure this setting if
the summer time (daylight saving time) is applied in the location where the camera is in use.
• In: Applies summer time. An asterisk (*) will be displayed on the left side of the displayed time and date.
• Out:  Does not apply summer time.
• Auto:  Applies summer time in accordance with the settings for “Start time & date” and “End time & date”
(month, week, day of the week, time).
• Default:  Out
[Start time & date] [End time & date]
When “Auto” is selected for “Summer time (daylight saving)”, select the time & date for the start time and the
end time (month, week, day of the week, time).
[Camera title on screen]
Select  “On” or “Off”  to determine whether or not to display the camera title on the screen. When  “On” is selected,
the character string entered for “Camera title on screen (0-9, A-Z)” will be displayed at the position selected
for “OSD”.
• Default:  Off
Operating Instructions39
7 Configure the basic settings of the camera [Basic] 
						

							[Camera title on screen (0-9, A-Z)]
Enter a character string to be displayed on the image.
• Available number of characters:  0 - 20 characters
• Available characters:  0-9, A-Z and the following marks
! " # $ % & ' ( ) * + , - . / : ; = ?
• Default:  None (blank)
[OSD] - [Date/time position]
Select the position where the time and date is displayed in images on the “Live” page.
• Upper left:  The time and date will be displayed in the upper left part of the screen.
• Lower left:  The time and date will be displayed in the lower left part of the screen.
• Upper center:  The time and date will be displayed in the upper center part of the screen.
• Lower center:  The time and date will be displayed in the lower center part of the screen.
• Upper right:  The time and date will be displayed in the upper right part of the screen.
• Lower right:  The time and date will be displayed in the lower right part of the screen.
• Default:  Upper left
[OSD] - [Camera title position]
Select the position where the character string is displayed in images on the “Live” page.
• Upper left:  The character string will be displayed in the upper left part of the screen.
• Lower left:  The character string will be displayed in the lower left part of the screen.
• Upper center:  The character string will be displayed in the upper center part of the screen.
• Lower center:  The character string will be displayed in the lower center part of the screen.
• Upper right:  The character string will be displayed in the upper right part of the screen.
• Lower right:  The character string will be displayed in the lower right part of the screen.
• Default:  Upper left
[OSD] - [Character size]
Select the size of the entered character string to be displayed at the selected OSD position in the image on
the “Live” page.
• 100%:  Displays in the standard size.
• 150%:  Displays in 150% of the standard size.
• 200%:  Displays in 200% of the standard size.
• Default:  100%
IMPORTANT
•If the settings for [Date/time position] and [Camera title position] are different, the frame rate may be
lower than the specified value.
• If the settings for [Date/time position] and [Camera title position] are different, characters may be
displayed incorrectly or overlapped depending on the [Character size] setting and the number of
characters used. After completing the settings, confirm the result on the “Live” page.
• If “150%” or “200%” is selected for [Character size], the frame rate may be lower than the specified
value.
[Brightness status display]
Select  “On” or “Off”  to determine whether or not to display the status of brightness on images displayed on the
“Live” page when adjusting brightness.
• Default:  On
[Indicator]
Determine whether or not to use the following indicators.
– Link indicator
40Operating Instructions
7 Configure the basic settings of the camera [Basic]