Panasonic Network Camera Recorder With Viewer Software BB-HNP15A Operating Instructions

							Operating Instructions
61
3.Configure the settings in the [Timer Settings] page, and click [OK] or [Apply].   
 If you click [OK], timer settings page will close.  
If you want to register another timer, click [Apply].
 If you want to set the keyword for t he recorded images, enter a keyword on 
the keyword page (see 
page 64).
Timer Settings Page 
						

							Operating Instructions
62
Note
If you click , during timer recording, timer recording is not canceled. To 
cancel it, disable the timer. The timer recording start time/stop time can also 
be changed by right clicking on the camera image in the multi-monitoring 
page, and selecting [Start timer recording] or [Stop timer recording] from the 
menu.
 If you set time period over midnight,  the image is divided into 2 images at 
midnight.
SettingDescription
Enable/DisableEnable or disable timers.
 Timer recording is available only when a timer is enabled.  Disabled timers do not record.
Timer NameEnter a timer name. (Maximum 24 characters.) 
The timer name is displayed on the timer list page.
Timer ScheduleTo set a timer, set start time, end time and the day of the week.
 Checking [Daily] sets the daily timer recording during the specified time period.
 If you set the day of the week, check [Day of the Week Setting] and specify the day or multiple days of the week. 
 
If the day of the week is not checked, the timer recording is 
not set.
 To record images for a full day, set the same start and end time. If you specify the same time for both start and end, the 
end time will be considered to be the next day.
Recording MethodSelect timer recording, motion detection recording only or 
alarm detection recording only.
 A time period before and after detection can be set for motion and alarm recordings. If you do not set a time period, 
images are recorded only at th e motion is detected or an 
alarm is detected.
 To set [all Alarm and Sensor], [Alarm1/Sensor] or [Alarm2],  check [Set the Alarm1/Sensor Recording]/[Set the Alarm2 
Recording] on the [Alarm/Sensor] setting window of the 
individual cameras.
Executing 
Commands for 
DetectionIf motion detection recording or alarm detection recording is 
chosen for the recording method, you can specify the 
commands to execute when motion or an alarm is detected.
Sensor deactivation 
timeTo limit unnecessary continuous  detection, set the deactivation 
time between detections. 
						

							Operating Instructions
63
If you close the operation window, recording will not stop.  
When  is displayed in the notification area, the recording software is running 
(see page 9).
 If the network is disconnected during recording, recording will be paused, but the recording icon (see 
page 56) will still be displayed. Recording starts again 
when the network is reconnected.
 See page 127 for deleting timers. 
						

							Operating Instructions
64
Setting Keywords for Timer Recorded Images
You can set a keyword for the images recorded by individual timers. 
You can search recorded images by setting a keyword.
1.Click [Keyword] of the timer to set.
2.Enter a keyword and click [OK].
Keyword Page
Note
2 keywords can be set (max. 40 characters each). 
						

							Operating Instructions
65
Displaying Timer List (individual camera)
The timer schedules of the individual cameras is displayed in a chart.
1.Select the camera whose timers you want to display and click [Timer List].
Timer List Page
Note
Colors displayed in charts can be changed in [Recorded Images] page in 
[Preferences]. See 
page 80 for instructions on setting the color.When you 
change the color, the display on the timer list page, recorded images page and 
multi-display page is changed for all registered cameras.
  
						

							Operating Instructions
66
Displaying Timer List (All cameras)
The timer schedules of all the cameras are displayed in a chart.
1.Select [Window]  [Timer List] on the menu bar.
 Click [Add] to add a [New Timer] setting.
 Click [Change] to change the timer settings.
 Click [Delete] to remove the timer setting.
Timer List Page 
						

							Operating Instructions
67
2.5 Playing the Recorded Images
Playback operation is explained below.
Search for the images to playback (see pages 68, 70)
Display the days that have recorded images are displayed in boldface on 
the calendar.
Select the day that has the images to playback
Displays the recorded-image list on the Image Timelines Chart.
Drag the playback bar, and select the time to playback (see page 72)
The images in the selected time frame are displayed in the playback list.
Confirm the images on the playback screen (see page 73)
The images that are selected in t he playback list can be confirmed on the 
playback screen.
Playback the images on the multi-playback page (see page 74)
When you select images from the playback list and click the [Playback] 
button, the images will be played ba ck on the multi-playback page. 
						

							Operating Instructions
68
2.5.1 Display the Recorded Images 
The timelines are displayed in the chart on the recorded images page. 
1.Select [Window]  [Recorded Images] on the menu bar.
2.Click [Search].
 The days that have recorded images are displayed in boldface on the calendar.
 If you want to specify search criter ia, enter the criteria and then click 
[Search] (see 
page 70).
3.Click the day on the calendar.
Note
The image timelines chart displays the image timelines for one day (from 
00:00:00 to 00:00:00).
Displays the month that contains the most recent images that match the criteria.
Image Timelines  Chart
If you click on a day that is 
bold, the images recorded 
on that day are displayed 
in the chart (see page 69).
The day that has the most recent images that match the criteria is selected 
and displayed in the list. 
						

							Operating Instructions
69
Note
Colors displayed in charts can be changed in [Recorded Images] page in 
[Preferences].
 
See page 80 for instructions on setting the color. When you change the color, 
the display on the timer list page, recorded images page and multi-playback 
page is changed for all registered cameras.
The selected range is enlarged.Images are displayed with different colors for 
each recording method.
Display in 24-h mode.
Select the time unit to display.
playback barImages are displayed for each camera.
Cameras are displayed in the order that they 
were registered.
The timer-recorded images are displayed with 
the timer name. 
						

							Operating Instructions
70
2.5.2 Searching the Recorded Images
Search for recorded images and display them in the Image Timelines Chart.
1.Select [Window]  [Recorded Images] on the menu bar.
2.Enter search criteria and click [Search].
Search criteria
Searched Target Select the folder to search.
To search a folder other than the destination folder, select 
[Select Folder], click [Browse...] and select a folder.
Time Period SettingTo search by time period, select the [Time Period Setting] 
check box and enter a time frame.
Weekly SettingSelect the desired days of the week.
Recording ModeSelect the recording mode.
 Normal recording is images recorded by using  or by 
selecting full time recording as the timer recording method.
 Motion detection recording is images recorded by using  
or by selecting motion detection recording as the timer 
recording method.
 Alarm recording is images recorded by using  or 
selecting alarm/sensor recording as the timer recording 
method.
Recording TriggerSelect the recording trigger (timer or manual).
KeywordSelect this check box to enab le keyword search. Enter the 
keyword for the recorded image.