Panasonic Network Camera Recorder With Viewer Software BB-HNP15A Operating Instructions

							Operating Instructions
41
Recorded Images Page
The timelines are displayed in the chart on the recorded images page (see page 
68). The camera name, recording time and recording mode can be checked on this 
page. Image searching, playback and data conversion can be also operated on this 
page.
1.Select [Window]  [Recorded Images] on the menu bar.
2.Click [Search].
 The window displays a list for the most recent day with recorded images.
Search window(See page 70)
Search Button
Image Timelines 
Chart
(See page 68)
Playback list
If you select a camera name in the image 
timelines chart, the cameras recorded 
images list will be displayed in the 
playback list (see page 72).
Playback Screen
One selected 
recorded image is 
displayed/played-
back (see page 
73). 
The recorded 
images that are 
checked on the 
playback list will be 
played on the 
multi-playback page 
(see page 74).
The displayed data can be 
edited 
(see page 93).
The day on which the most recent images were recorded is selected and displayed in 
the list. 
						

							Operating Instructions
42
Note
 When you click the search button, days that have recorded images are displayed in boldface on the calendar. Clicking one of these days displays the 
list of images for that day (see 
page 68).
 If you press [Ctrl]-[Tab] key, the windo ws will cycle through [Single-Monitoring] 
- [Multi-Monitoring] - [Multi-Playbac k] - [Recorded Images] in that order.
 You can change the items that are displayed in the playback list (see page 91). 
						

							Operating Instructions
43
Multi-Playback Page
The recorded images that are selected in the recorded images page are 
simultaneously playback on the multi-playback page.
 
To display images in the multi-playback page, set the playback time and select the 
recorded images in the recorded images page (see 
page 72). 
You can change the screen layout to display, 1 screen or 4 screens (see page 88). 
In the 4-screen layout, you can simultaneously playback the recorded images of 4 
cameras. You can select the display form at: [Display timelines as chart] or 
[Standard] (see 
page 88).
1.Select the desired recorded image in th e [Playback list] in [Recorded Images] 
page, then click [Palyback] (see page 
41).
Display timelines as chart
Standard
Note
If you press [Ctrl]-[Tab] key, the windo ws will cycle through [Single-Monitoring] - 
[Multi-Monitoring] - [Multi-Playback]  - [Recorded Images] in that order.
If a selected camera has no 
recorded images at the set time, no 
image is displayed for that camera. 
						

							Operating Instructions
44
Settings Page 
From the settings page, you can configure the environment settings, register and 
delete cameras, configure camera settings, and add and delete timers.
1.Select [Window]  [Settings] on the menu bar.
Search Camera (See page 21)
Add Camera (See page 20)/Delete Camera (See page 125) 
Add Timer (See page 60)/Delete Timer (See page 127)
Importing/Exporting the Camera Information (See page 122)
Configure settings for individual cameras (see page 20). The configuration window of the item 
that is selected on the left is displayed.
Configure the 
environment 
settings for this 
software.
 Preferences 
(See 
page 13)
 Proxy Server 
Settings
 
(See page 18)
Multi-Monitoring
 
(See page 78)
 Multi-Playback 
(See page 87)
 Recorded Images
(See page 90)
 Navigation (See 
page 129)
 Operation Support  
(See page 131)
(See page 45) 
						

							Operating Instructions
45
[Settings List Display]
The settings list is displayed in tree form.
[OK Button, Cancel Button, Apply Button]
[Setting Change Icon Display]
When you change a setting, a mark is di splayed on the icon for the item that you 
changed.
 
The mark is deleted after the setting is applied by clicking [OK] or [Apply].  
If the settings window is closed (e.g., by clicking [Cancel]) while the mark is 
displayed, the setting change will not be applied.
Apply changes to the settings and close the window.
Close the window without applying changes.
Apply changes but leave the window open. 
Use [Apply] to save your changes while configuring several 
different settings.
 
If you have not made any changes, this button will be 
unavailable.
Expand an item by clicking       , and collapse an item by clicking       .       
ClickClickClick
Setting value changed: A green checkmark is displayed.
The mark is removed after the setting is applied 
by clicking [OK] or [Apply]. Setting value added: A blue plus-sign is displayed.
Setting value deleted: A red X-mark is displayed. 
						

							Operating Instructions
46
Camera Operation Bar
You can display the camera operation bar and operate the camera (see page 53).
1.Click the camera screen that you want to operate.
2.Select [Window]  [Camera Operation] on the menu bar.
 The camera operation bar of the selected camera is displayed.
Note
The display of the operation bar will differ depending on the camera type.
You can move the location of the operation bar by dragging 
(moving the mouse while holding down the left button) on the title. 
						

							Operating Instructions
47
Menu Bar
To Next Image
To Previous ImageDisplay the next image. 
(previous image in reverse playback)
Display the previous image. 
 (next image in reverse playback)
File
Layout
Recording
Exit
Next Page
Start Recording
Start Motion Detection
Recording
Stop Recording Alarm/Sensor Recording
Start All
Start Alarm 1/Sensor
Start Alarm 2
All Camera
Enable 
Disable 
Enable 
Disable 
Selected Camera Next Camera
Previous Camera
Previous Page
Select All
Clear All
Close Operation Window
Display the next multi-monitoring page. 
(Enable if there is a next page, and 
disable if there is not a next page.)
Start manual recording.
Start manual motion detection
recording.
Stop all manual recordings.
Start manual alarm/sensor recording of all. 
Start 
manual alarm1/sensor recording.
Start 
manual alarm2 recording.
Enable all registered cameras.
Disable all registered cameras.
Enable the selected cameras.
Disable the selected cameras. Move control to the next camera. 
(Enable if there is a next camera, 
disable if there is not a next camera.)
Move control to the previous camera. 
(Enable 
if there is a previous camera and 
disable if there is not a previous camera.)
Display the previous multi-monitoring page. 
(Enable if there is a previous page, and 
disable if there is not a previous page.)Select all displayed cameras. (When you 
change pages, the selected will be cleared.)
Clear the selection from all cameras.
Playback
Start Playback
Reverse Playback
Pause
StopStart playback.
Reverse playback.
Pause playback.
Stop playback. 
						

							Operating Instructions
48
Note
When a cameras address is an IPv6 address (see page 23), the camera’s top 
page cannot be opened from the Camera Portal Site on the menu bar. 
To open the cameras top page, enter the URL registered with the IPv6 Domain 
Name Service for the camera address.
Display Mode
Window
Multi-MonitoringFull Screen Mode
Change the display to full screen mode.
ShrinkShrink the size of the display of the selected 
camera’s image.
ExpandExpand the size of the display of the selected 
camera’s image
Clear Expand/ShrinkRestore the expand/shrink display.
Window ModeChange the display to window mode.
Display the multi-monitoring page. 
Single-MonitoringDisplay the single-monitoring page. 
Multi-PlaybackDisplay the multi-playback page. 
Recorded Images Display the recorded images page. 
Camera Operation Display/Hide the camera operation bar.
Timer ListDisplay the timer list for all cameras.
SettingsDisplay the set environment page.
Remote Access
SettingsDisplay the remote access settings page. 
New ConnectConnect to a remote server.
Client ControlDisplay the control page for clients that 
use the remote access function.
Language
Japanese 
EnglishDisplay the page in English.
Display the page in Japanese.
Help
License Registration
Open Operating Instructions
About Network Camera 
Recorder with Viewer Software
Product Information
Open license registration page.
Open operating instructions pdf file.
Camera Portal SiteOpen camera top page.
Open version information page of 
this software. Open the network camera information 
website.
Support InformationOpen support information website 
for this software. 
						

							Operating Instructions
49
Icon of Toolbar and Slide Window
Note
If you drag the toolbar right or left, icons displayed on the toolbar will be changed.
Move the focus to the previous 
camera. (Enable if there is a 
previous camera and disable if 
there is not a previous camera). Close the operation window.
Set the volume of the selected 
camera (see page 86) .
Operate remote acce ss 
(see page 108).
Reconnect to t he server 
(see page 113).
Change the display to full 
screen mode.
Change the display to 
window mode.
Display/Hide the camera 
operation bar. 
Take snapshots from the 
focus camera.
Transmit audio t o cameras 
that support audio f eatures 
(see page 121 ).
Move the focus to the next camera. 
(Enable if there is a next camera 
and disable if there is not a next 
camera).
Start manual recording of the 
selected camera.
Start manual motion detection 
recording of the selected camera.
Start manual alarm recording 
(alarm recording of all, alarm 1  
/sensor, alarm 2) of the selected 
camera.
Stop manual recording.
Displays the number of the current 
page, and the total number of 
pages. Move to a specific page by 
entering the page number.
Display the previous page. 
(Enable if there is a previous 
page, disable if there is not 
a previous page.)
Display the next page. (Enable if there is a next 
page, disable if there is not 
a next page.)
Display the multi-monitoring 
page. Display the multi-playback 
page.
Display the recorded images 
page. 
Display the timer list for all 
cameras.
Display the settings page.
Select all displayed cameras. 
(When you change pages, 
the selected will be cleared.)
Clear the selection from all 
cameras.
Shrink the size of the display of 
the selected camera’s image.
Display the single-monitoring 
page.
Expand the size of the display of
the selected camera’s image
Drag to right. 
						

							Operating Instructions
50
2.3 Monitoring the Camera
2.3.1 Multi-Monitoring Page
After registering a camera, the camera’s images are displayed on the multi-
monitoring page.
Note
 The camera that is selected on the multi-monitoring page is the focus camera.
 The camera images are displayed in 4-screen layout (2 rows x 2 columns) in the order that they  are registered (see 
page 79).
 If the number of registered cameras e xceeds the limit of screens in a window, 
extra pages are automatically created to accommodate the number of 
cameras.
 To display the camera name and the frame rate, check [Display the frame  rate] and [Display the camera  name] from [Preferences] 
→ [Multi-Monitoring] 
(see 
page 80).
 Sometimes audio may be interrupted, or image may be paused.
 Audio is played back for the focus camera and the selected camera. 
You can adjust volume with  on the toolbar (see page 86).
Display the camera name (see page 22). 
Frame rate (image refreshing frequency)
(see page 80). 
         is displayed when monitoring 
is paused 
(see page 84).   
         is displayed when 
recording is paused.
   Focus camera (See page 77)  
Zoom rate (See page 52)