Home
>
Panasonic
>
Camera
>
Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions
Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
Operating Instructions
[For assistance, please call: 1-800-272-7033] 141
Specification and
Troubleshooting
About Setup Page
Problem Cause and Remedy
The Camera Portal page and
Setup Page do not appear. Make sure the LAN 1—4 indicators and WIRELESS
indicator light green. Make sure the indicators on
the Ethernet card and wireless card is on. If any
indicator is off, check the Ethernet cable on the
LAN.
The PC on the LAN side may not be assigned an IP
address by the KX-HGW600. Make sureObtain an
IP...](http://img.usermanuals.tech/thumb/58/66645/w300_kx-hgw600_en_om_d-140.png "Page 141
Operating Instructions
[For assistance, please call: 1-800-272-7033] 141
Specification and
Troubleshooting
About Setup Page
Problem Cause and Remedy
The Camera Portal page and
Setup Page do not appear. Make sure the LAN 1—4 indicators and WIRELESS
indicator light green. Make sure the indicators on
the Ethernet card and wireless card is on. If any
indicator is off, check the Ethernet cable on the
LAN.
The PC on the LAN side may not be assigned an IP
address by the KX-HGW600. Make sureObtain an
IP...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 141 Specification and Troubleshooting About Setup Page Problem Cause and Remedy The Camera Portal page and Setup Page do not appear. Make sure the LAN 1—4 indicators and WIRELESS indicator light green. Make sure the indicators on the Ethernet card and wireless card is on. If any indicator is off, check the Ethernet cable on the LAN. The PC on the LAN side may not be assigned an IP address by the KX-HGW600. Make sureObtain an IP...
Page 142
![Page 142
Operating Instructions
142
About Network Camera Setup
Problem Cause and Remedy
The Automatic Setup function
does not work. Make sure the connection between the device and
the KX-HGW600 have been successfully made.
The Automatic Setup function is only available for
20 minutes after the Network Camera is turned on.
Restart the Network Camera.
Make sureEnableis checked on the Network
window of Network Camera ([Network] 1.
Network Configuration from the Setup
Program).
If you connect the KX-HGW600 to...](http://img.usermanuals.tech/thumb/58/66645/w300_kx-hgw600_en_om_d-141.png "Page 142
Operating Instructions
142
About Network Camera Setup
Problem Cause and Remedy
The Automatic Setup function
does not work. Make sure the connection between the device and
the KX-HGW600 have been successfully made.
The Automatic Setup function is only available for
20 minutes after the Network Camera is turned on.
Restart the Network Camera.
Make sureEnableis checked on the Network
window of Network Camera ([Network] 1.
Network Configuration from the Setup
Program).
If you connect the KX-HGW600 to...")
Operating Instructions 142 About Network Camera Setup Problem Cause and Remedy The Automatic Setup function does not work. Make sure the connection between the device and the KX-HGW600 have been successfully made. The Automatic Setup function is only available for 20 minutes after the Network Camera is turned on. Restart the Network Camera. Make sureEnableis checked on the Network window of Network Camera ([Network] 1. Network Configuration from the Setup Program). If you connect the KX-HGW600 to...
Page 143
![Page 143
Operating Instructions
[For assistance, please call: 1-800-272-7033] 143
Specification and
Troubleshooting
About Network Camera Setup
Problem Cause and Remedy
You cannot view the manually
registered Network Camera. To set up your Network Camera manually, please
set up the Screen Assignment ( Page 77) window
and Por t Forwarding ( Page 94)/NAT (IP
unnumbered) ( Page 96) window for the IP
address of the Network Camera.
If you restart the manually registered Network
Camera, the setting may be changed by...](http://img.usermanuals.tech/thumb/58/66645/w300_kx-hgw600_en_om_d-142.png "Page 143
Operating Instructions
[For assistance, please call: 1-800-272-7033] 143
Specification and
Troubleshooting
About Network Camera Setup
Problem Cause and Remedy
You cannot view the manually
registered Network Camera. To set up your Network Camera manually, please
set up the Screen Assignment ( Page 77) window
and Por t Forwarding ( Page 94)/NAT (IP
unnumbered) ( Page 96) window for the IP
address of the Network Camera.
If you restart the manually registered Network
Camera, the setting may be changed by...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 143 Specification and Troubleshooting About Network Camera Setup Problem Cause and Remedy You cannot view the manually registered Network Camera. To set up your Network Camera manually, please set up the Screen Assignment ( Page 77) window and Por t Forwarding ( Page 94)/NAT (IP unnumbered) ( Page 96) window for the IP address of the Network Camera. If you restart the manually registered Network Camera, the setting may be changed by...
Page 144
![Page 144
Operating Instructions
144
About Recording/Playback function
Problem Cause and Remedy
You cannot record the
Network Camera screen. Make sure the connection between the Network
Camera and the KX-HGW600 have been
successfully made.
Make sure the SD memory card has been inserted
firmly into the SD memory card slot.
Administrator OnlyischeckedontheSecurity:
Administrator window of Network Camera
([Security: Administrator] 1. Authentication
Enable). In this case, enter the ID (user name) and
password of...](http://img.usermanuals.tech/thumb/58/66645/w300_kx-hgw600_en_om_d-143.png "Page 144
Operating Instructions
144
About Recording/Playback function
Problem Cause and Remedy
You cannot record the
Network Camera screen. Make sure the connection between the Network
Camera and the KX-HGW600 have been
successfully made.
Make sure the SD memory card has been inserted
firmly into the SD memory card slot.
Administrator OnlyischeckedontheSecurity:
Administrator window of Network Camera
([Security: Administrator] 1. Authentication
Enable). In this case, enter the ID (user name) and
password of...")
Operating Instructions 144 About Recording/Playback function Problem Cause and Remedy You cannot record the Network Camera screen. Make sure the connection between the Network Camera and the KX-HGW600 have been successfully made. Make sure the SD memory card has been inserted firmly into the SD memory card slot. Administrator OnlyischeckedontheSecurity: Administrator window of Network Camera ([Security: Administrator] 1. Authentication Enable). In this case, enter the ID (user name) and password of...
Page 145
![Page 145
Operating Instructions
[For assistance, please call: 1-800-272-7033] 145
Specification and
Troubleshooting
About Other Troubles
Problem Cause and Remedy
The system has detected a
conflict for IP address with
the system having hardware
address
XX:XX:XX:XX:XX:XX or
Another device on your TCP/
IP Internet, which has the
physical address
XX:XX:XX:XX:XX:XX, is
currently using the same IP
address
(XXX.XXX.XXX.XXX). Your
TCP/IP network interface has
been shut down. is displayed
in the dialog box. Turn off all...](http://img.usermanuals.tech/thumb/58/66645/w300_kx-hgw600_en_om_d-144.png "Page 145
Operating Instructions
[For assistance, please call: 1-800-272-7033] 145
Specification and
Troubleshooting
About Other Troubles
Problem Cause and Remedy
The system has detected a
conflict for IP address with
the system having hardware
address
XX:XX:XX:XX:XX:XX or
Another device on your TCP/
IP Internet, which has the
physical address
XX:XX:XX:XX:XX:XX, is
currently using the same IP
address
(XXX.XXX.XXX.XXX). Your
TCP/IP network interface has
been shut down. is displayed
in the dialog box. Turn off all...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 145 Specification and Troubleshooting About Other Troubles Problem Cause and Remedy The system has detected a conflict for IP address with the system having hardware address XX:XX:XX:XX:XX:XX or Another device on your TCP/ IP Internet, which has the physical address XX:XX:XX:XX:XX:XX, is currently using the same IP address (XXX.XXX.XXX.XXX). Your TCP/IP network interface has been shut down. is displayed in the dialog box. Turn off all...
Page 146
Operating Instructions 146 6.5 FCC and Other Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications....
Page 147
![Page 147
Operating Instructions
[For assistance, please call: 1-800-272-7033] 147
Specification and
Troubleshooting
CAUTION
To comply with FCC RF exposure requirements in uncontrolled environment:
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm (8″) spacing must be provided between
antenna and all persons body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
This transmitter must not be co-located or operated in...](http://img.usermanuals.tech/thumb/58/66645/w300_kx-hgw600_en_om_d-146.png "Page 147
Operating Instructions
[For assistance, please call: 1-800-272-7033] 147
Specification and
Troubleshooting
CAUTION
To comply with FCC RF exposure requirements in uncontrolled environment:
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm (8″) spacing must be provided between
antenna and all persons body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
This transmitter must not be co-located or operated in...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 147 Specification and Troubleshooting CAUTION To comply with FCC RF exposure requirements in uncontrolled environment: This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm (8″) spacing must be provided between antenna and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This transmitter must not be co-located or operated in...
Page 148
Operating Instructions 148
Page 149
Operating Instructions 149 Index
Page 150
Operating Instructions 150 A AC adaptor 11, 21, 41, 146 Access Control 78 Address Translation 93 Automatic Setup 34, 48 B Basic Setup 25, 27, 29, 31, 45, 72 C Cable clamper 11, 21, 41 Camera Portal 36, 50, 70 Camera Setup 73, 77, 78 Category 5 cross cable 19, 39 Category 5 straight cable 11, 19, 39 Change Password 110 Channel 84, 138 Configuration Types 16 Continued Services Technical Support Line 145 CRC 113 Cross cable 20, 34, 40, 48 D DC IN jack 12, 21, 41 DC plug 21, 41 Default setting list 134 DHCP...