Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 101
System
Features
4.4.2 Packet Filtering
Packet Filtering windowallows you to control the access to a network by letting the
incoming and outgoing packets pass or not based on the information (Source IP
Address, Destination IP Address, Source Port, Destination Port, Protocol, etc.).
Used properly, Packet Filtering is a tool for improving network security. It is processed
from the lower entry number to the higher entry number. For more...

Operating Instructions
102
2.Click[Add]in theCurrent Statustable.
3.Enter the appropriate data fields and click[Add].
Note
Do not enter the space in each data field.
4.When you have finished, click[Save]. The settings will be saved.
5.Click[Restart Now!]. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 103
System
Features
Instructions for the data fields
No.Set the entry number (1-64). Packet Filtering is processed from
the lower entry number to the higher entry number. A newly
assigned entry number overwrites the previous one.
Typ eSelectPermitorDo Not Permit. When a packet meets all the
conditions specified, whether to pass (Permit) or not (Do Not
Permit) the packet is carried out.
DirectionSelectWLorLW. Specify whether the packet...

Operating Instructions
104
To change or delete entries
1.Click[Packet Filtering]on the Setup Page.
2.Click the entry number you want to change or delete in theCurrent Statustable.
3.Change the settings and click[Change]. To delete, click[Delete].
 To clear the current settings, click[Clear].
Note
Do not enter the space in each data field.
4.When you have finished, click[Save]. The settings will be saved.
5.Click[Restart Now!].
To change the priority
Packet Filtering is processed from the lower entry...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 105
System
Features
4.4.3 Optional Setup
Optional Setup windowallows you to set the optional settings for the access to the
LAN or WAN (Internet). Change the setup only when necessary. To change the optional
settings, follow the steps below.
1.Click[Optional Setup]on the Setup Page.
2.Click the setting window and enter the appropriate data fields.
Please refer to Page 106—Page 109 for instructions about each data field.
 To clear the...

Operating Instructions
106
3.When you have finished, click[Save]. The settings will be saved.
4.Click[Restart Now!].

IP Address (LAN)
DHCP
When you use the DHCP server function, the KX-HGW600 can assign an IP address
automatically to each device on the LAN side. IP Address (LAN)Enter the IP address on the LAN.
(The default setting is 192.168.0.254.)
The IP address must be entered out of theAvailable Address
Rangein theDHCPsetting.
Subnet MaskEnter the Subnet Mask on the LAN.
(The default setting is...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 107
System
Features
Static DHCP
When you use the DHCP server function, the KX-HGW600 can assign static IP address
to each device by registering its MAC address.
1.Click[Add]in theStatic DHCPtable.
PPPoE
When PPPoE Connection is used to connect to the ISP, you can select how to initiate/
stop the PPPoE Connection. First, select how to connect from theConnection.Ifyour
payment plan with your ISP is not the unlimited Internet access and...

Operating Instructions
108
Note
When you access the Camera Portal page from the WAN side, PPPoE Connection
cannot be disconnected.
DNS Relay
DNS Relay function frees you from setting up the DNS server address in each device
on the LAN side, even though it is set up with static IP address. This function distributes
the DNS server address to the Network Camera and the PC on the LAN side.
Note
When the DNS server is connected to the LAN side, do not use this function. Connection
Always
Automatic
...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 109
System
Features
MTU size
MTU (Maximum Transmission Unit) specifies the maximum size of a packet that can be
transferred in one frame over a network. Any messages larger than the MTU are divided
into smaller packets before being sent, which slows down transmission speed.
Normally, the KX-HGW600 optimizes the MTU size automatically. Change the MTU size
only when necessary.
Note
Depending on the MTU setting, the communication speed may...

Operating Instructions
110
4.5 System Commands
4.5.1 Change Password
Change Password windowallows you to change the common password to access
from the Camera Portal page to the Setup Page or Recording/Playback page.
For security, specify a unique password for the Setup Page and avoid KX-HGW
(default setting). It will prevent any unauthorized user from changing any settings from
the WAN (Internet) side.
1.Click[Change Password]on the Setup Page.
2.Enter a new user name in theUser Name(up to 15...