Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 71
System
Features
4.2.2 Recording/Playback
Recording/Playbackallows you to access the Recording window on the Recording/
Playback page.
1.Click[Recording/Playback]on the Setup Page. The Recording window appears.
Note
For more information about the Recording window, please refer to Page 56. 

Operating Instructions
72
4.3 Configuration
4.3.1 Basic Setup
Basic Setup windowallows you to set the basic network parameters for the WAN
(Internet) access. To set the network parameters, follow the steps below.
1.Click[Basic Setup]on the Setup Page.
2.Check the information for network connection and select the appropriate
configuration type.
3.Enter each network parameter in the appropriate data fields.
 To clear the current settings, click[Clear].
4.When you have finished, click[Save]. The settings...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 73
System
Features
4.3.2 Camera Setup
Camera Setup windowallows you to set up the Network Cameras connected to the
KX-HGW600. Since the network settings such as camera name, port no., and IP
address are automatically configured by the Automatic Setup function, normally you do
not need to set up any further. To change the camera name, follow the steps below.
To configure the network settings of Network Camera manually, follow the steps...

Operating Instructions
74
3.EnterCamera Nameand click[Change].
 To delete the registered Network Camera, click[Delete].
Note
If the ID and password are set on the Security: Administrator window of Network
Camera, you have to enter the same ID (user name) and password. For more
information, please refer to Network Camera’s manual.
4.When you have finished, click[Save]. The settings will be saved.
5.Click[Restart Now!].
Instructions for the data fields
Camera NameIt is displayed on the Camera Portal page....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
System
Features
To set up your Network Camera manually
To set up your Network Camera manually, follow the steps below.
1.CheckDo Not Usein theAutomatic Setup.
2.Click[Add]in theRegistration/Modificationtable.
3.EnterCamera Name,Por t No.andIP Addressand click[Add].
Note
If the ID and password are set on the Security: Administrator window of Network
Camera, you have to enter the same ID (user name) and password. For more
information,...

Operating Instructions
76
Notes
 When you set up your Network Camera manually, the Network Camera also
needs the setting of the static IP address on the Network window. Please
refer to the Network Cameras manual for more information.
 When you set up your Network Camera manually, the KX-HGW600 needs
the settings on the Screen Assignment window ( Page 77) and Port
Forwarding window ( Page 94).
 The IP addresses and port numbers used by the Automatic Setup function
are not available when you add Network...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 77
System
Features
Screen Assignment
Screen Assignment windowallows you to set the screen format and the location of
the image fields on the Camera Portal page.
1.Click[Screen Assignment]on the Camera Setup window.
2.CheckCamera Name and Still Image (refreshing), Camera Name and Still
ImageorCamera Name Onlyin theScreen Format.
3.Click the screen frame in theScreen Assignment.
4.Select the desired camera name from the drop-down menu and...

Operating Instructions
78
Access Control
Access Control windowallows you to control the access to the Camera Portal page
from the WAN side of the KX-HGW600.
This setting is not for the access control to the Setup Page or Recording/Playback page.
1.Click[Access Control]on the Camera Setup window.
2.CheckNone,Administrator OnlyorRestricted Access.
 When you checkAdministrator Only, the following window appears.
Enter the user name and password to access the Camera Portal page.
3.When you have finished,...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 79
System
Features
Instructions for the data fields
To access the Camera Portal page from the WAN side
1.FromthePContheLANside,click[Access Control]on the Camera Setup
window.
2.CheckAdministrator Only. NoneAnyone can access the Camera Portal page from the WAN
side. To access the Setup Page, the password for Setup
Page ( Page 110) is required.
Administrator OnlyOnly administrator can access the Camera Portal page from
the WAN side by...

Operating Instructions
80
3.Enter the user name and password (e.g., Panasonic) to access the Camera
Portal page.
4.When you have finished, click[Save].
5.Click[Restart Now!].
The authentication window appears.
6.Enter the user name and password registered on the authentication window and
then click[OK].
7.From the PC on the WAN side, enter the IP address on the WAN in the address
field of your web browser.
The authentication window appears.
8.Enter the user name and password registered on the Access...