Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 121
System
Features
4.6.5 Support
Support windowallows you to jump to the Panasonic web site and to transmit the KX-
HGW600’s hardware and software information to the support team for assistance. You
do not have to register the information of a particular item if you do not want to.
1.Click[Support]on the Setup Page.
 If you do not want to register the information of an item, selectDo not send
from the drop-down menu.
 To clear the...

Operating Instructions
122
4.6.6 Help
Help windowprovides you with instructions for each function of the Setup Page.
1.Click[Help]on the Setup Page.
2.Select the text you want to explore.
Note
You can also link to Help window by clicking each text on the Setup Page. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 123
Technical
Guides
Section 5
Technical Guides 

Operating Instructions
124
5.1 Reset procedure—default settings
The KX-HGW600 has two buttons on the rear side of the unit. These two buttons are
used to initialize or restart the KX-HGW600.
To initialize the KX-HGW600
When you forget the KX-HGW600 password ( Page 110) or when you need to clear
all the settings of the KX-HGW600, push and hold the FACTORY DEFAULT RESET
button for a few seconds.
The settings are cleared and initialized to the default settings ( Page 134).
To restart the KX-HGW600
When the...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 125
18.6 cm(7.3)
18.6 cm
(7.3) Wall template
5.2 Wall mounting
The KX-HGW600 can be mounted on a wall.
1.Install the two-paired screws and washers (included accessories) into the wall
using the wall template.
2.Mount the unit on the screws, then slide it down.
Technical
Guides 

Operating Instructions
126
5.3 Proxy Server Setting
Some ISP’s WWW sites are connected to the web browser via a proxy server.
The Setup Page cannot be connected to the web browser via the proxy server.
In this case, change the web browser setting as follows.
1.Start up the Internet Explorer. (The window is for Internet Explorer 6.)
2.Click[Tools] [Internet Options...] [Connections tab]. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 127
Technical
Guides
3.Click[LAN Settings...].
Confirm theUse a proxy server for your LANcheck box.
When checked, clear the check box, and click[OK].
When not checked, click[Cancel]. Your proxy server settings are causing
no problems.
Note
When you connect the KX-HGW600 to the LAN (Intranet), please ask your
network administrator and change your setting.
Confirm if
the check box
is not checked. 

Operating Instructions
128
5.4 Security on the Wireless Network
In a wireless network, data security is maintained using the following three functions.
According to your security needs, use any combination of these security options and
strengthen your security.
SSID
( Page 83)SSID (Service Set IDentifier) is a wireless network name.
SSID setting must be same among the wireless devices.
For security, specify a unique SSID that others
cannot guess for a wireless network. Avoid an obvious
SSID (your name,...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 129
Technical
Guides
5.5 TCP/IP Properties Setup
To access the Camera Portal page using a web browser, you must set the TCP/IP
network protocol in each PC and enable the DHCP server function. Follow the steps
below and set up the PC.
For Windows 95, 98 and Me
1.Click[Start] [Settings] [Control Panel] [Network]
Select[TCP/IP]associated with your network card[Properties]
[Obtain an IP address automatically] [DNS Configuration tab]...

Operating Instructions
130
5.6 Confirmation of private IP address
Private IP address is the network ID which is not used on the Internet. It is classified into
Class A, Class B and Class C shown in the following table. Please set the IP address in
the range of the number specified in the class meeting to your local network scale.
Confirming IP addresses of the PC on the network using the MS-DOS
®Prompt
(Command Prompt)
1.Click[Start] [Program] [MS-DOS Prompt] MS-DOS Prompt window
opens (Windows 98)....