Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 131
Technical
Guides
5.7 PPPoE Connection (IP unnumbered)
When PPPoE Connection (IP unnumbered) using multiple global IP addresses is used
to connect to the Internet , the KX-HGW600 assigns each private IP address to the
Network Camera and PC on the LAN side. NAT (IP unnumbered) function translates the
global IP address to the private IP address.
To translate the global IP addresses xxx.yyy.zzz.100/29 (xxx.yyy.zzz.100-
xxx.yyy.zzz.107)...

Operating Instructions
132
 Address Translation NAT (IP unnumbered)Setting items Description
Basic Setup
IP address of
KX-HGW600
Address Translation
NAT (IP unnumbered)xxx.yyy.zzz.101
Use
Translate the global IP address to the private IP address
according to the network condition.
Optional Setup
IP Address (LAN)
DHCP192.168.0.1
When you build a web server on the LAN side, set the IP
address of the corresponding server manually or checkUse
check box of the DHCP Server and then enter the static IP
address...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 133
Specification and
Troubleshooting
Section 6
Specification and Troubleshooting 

Operating Instructions
134
6.1 Default setting list
Authentication window (Password for Setup Page and Recording/Playback page)
Basic setup
Camera Setup
Wireless Setup
Address TranslationUser Name
PasswordNone
KX-HGW
Internet ConfigurationDHCP Connection
Other setting items[Blank]
Camera Entry
Automatic SetupUse
Screen Assignment
Screen FormatCamera Name and Still Image
(refreshing)
Access ControlRestricted Access
Basic
SSID
Blanked SSID connection
ChannelHGW600
Per mit
1
EncryptionDisabled
MAC Address...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 135
Specification and
Troubleshooting
Packet Filtering
No.
Type DirectionSource Destination
ProtocolLog
Output
IP Address Port IP Address Port
1
Permit W L KX-HGW600 80 TCP Y
53
Pe r m i t W L10.0.0.0 -
10.255.255.255TCP&UDP Y
54
Pe r m i t W L172.16.0.0 -
172.31.255.255TCP&UDP Y
55
Pe r m i t W L192.168.0.0 -
192.168.255.255TCP&UDP Y
56
Pe r m i t L W10.0.0.0 -
10.255.255.255TCP&UDP Y
57
Pe r m i t L W172.16.0.0 -
172.31.255.255TCP&UDP...

Operating Instructions
136
* You cannot change, delete and move the entry number 1 because it is used on
the Access Control Window.
Optional Setup
Recording/Playback 59 Prevents the invalid access from the WAN side to the KX-HGW600.
(When TCP packet from the WAN side cannot communicate with the
KX-HGW600)
60 Prevents the invalid access from the WAN side to the LAN side.
(When TCP packet from the WAN side cannot communicate with the
device on the LAN side)
61-64 Prevents the intrusion and leak of NBT...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 137
Specification and
Troubleshooting
6.2 Recording Duration Information
For the Frame rate setup ( Page 58), please refer to the table below.
Recording Duration of Motion Images (5 frames/second, Image Quality: Standard)
Recording Duration of Still ImagesCard TypeImage Resolution
Approx. time
640 X 480
26KB/frameApprox. time
320 X 240
13KB/frameApprox. time
160 X 120
4KB/frame
512MB67 min 134 min 436 min
256MB33 min 67 min 218 min...

Operating Instructions
138
6.3 Specification
KX-HGW600 Specification
Item Description
Ethernet Interface
(WAN)Port: 10Base-T Ethernet RJ-45 connector x 1
Protocol: IEEE 802.3 (10Base-T)
Speed: 10 Mbps
Data communications mode: Half duplex/Full duplex (automatic
identification)
Ethernet Interface
(LAN)Ports: 10Base-T/100Base-TX Ethernet RJ-45 connector x 4
Protocol: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX)
Speed: 10/100 Mbps (automatic negotiation)
Data communications mode: Half duplex/Full duplex...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 139
Specification and
Troubleshooting
Other Specifications
* These settings change with the condition of a network.Item Description
RouterProtocol: PPPoE/DHCP/Static/PPPoE (IP unnumbered)
PPP Authentication: Automatic
PPPoE Connection: Manual/Automatic/Always
RIP: RIPv1
DHCP Server: Up to 128 clients
DNS Relay
Packet Filtering: Up to 64 entries
Address Translation: IP Masquerade, Port Forwarding, Static
NAT
Wireless NetworkSecurity:...

Operating Instructions
140
6.4 Troubleshooting
About KX-HGW600 Connection
About WWW Site Problem Cause and Remedy
The POWER indicator lights
red. The KX-HGW600 hardware is in a bad status. Push
the RESTART button ( Page 124) or contact our
customer call center.
The CATV/xDSL/optical cable
modem network does not
work and the WAN indicator
does not light.
 Make sure the connection between the KX-HGW600
and the modem has been successfully made.
 Make sure the KX-HGW600 and the modem have
been turned on....