Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
System
Features
MAC Address Filtering
MAC Address Filtering windowallows you to limit the wireless devices including the
Network Camera and PCs connected to the KX-HGW600. Each network card has MAC
address which is assigned as a unique physical address in the world. Only the wireless
devices that have MAC addresses entered in theMAC Addresscan communicate.
1.Click[MAC Address Filtering]on the Wireless Setup window.
2.CheckUsein...

Operating Instructions
92
3.Click[Add]in theCurrent Statustable.
4.EnterMAC Addressand click[Add].
Separate each two-digit group (0—9, A—F or a—f) by entering a colon :
between them.
5.When you have finished, click[Save]. The settings will be saved.
6.Click[Restart Now!].
Note
To confirm the MAC address of your Network Camera, please refer to the
Network Camera’s manual. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 93
System
Features
4.4 Advanced Features
4.4.1 Address Translation
Address Translation windowtranslates the global IP address on the WAN to the
private IP address that is sent out to the LAN.
1.Click[Address Translation]on the Setup Page.
2.CheckUseorDo Not Usein theAddress Translation.
(The default setting is Use.)
 When you set Port Forwarding function using a single global IP address on
the WAN (Internet), click[Port Forwarding].
...

Operating Instructions
94
Port Forwarding
Port ForwardingallowsyoutoviewtheNetworkCamerascreenontheLANsidefrom
the PC on the WAN (Internet) side. Enter the port number and the IP address of the
corresponding Network Camera in theForwarding Port No.andForwarding IP
Addressrespectively.
 To set up Network Cameras manually
To change the priority
When you add two or more entries,Change of priorityappears. Port Forwarding is
processed from the lower entry number to the higher entry number. To change the...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
System
Features
Instructions for the data fields
Note
WhenAutois displayed in theCurrent Statustable, you cannot change the
settings because the KX-HGW600 has set up Network Camera automatically. EntryCheckEnabledorDisabled. When you checkEnabled,the
entry works as specified. When you checkDisabled,the
entry does not work but will work when you checkEnabled
later.
ProtocolSelect the protocol(s) to send or receive data to/from the
WAN...

Operating Instructions
96
NAT (IP unnumbered)
When your ISP assigns multiple global IP addresses to the WAN (Internet) side of the
KX-HGW600, NAT (IP unnumbered) function translates the global IP address to the
private IP address.
NAT (IP unnumbered) consists of Static NAT, Port Forwarding and IP Masquerade in this
manual.
Static NAT
This function translates a single global IP address on the WAN (Internet) to a private IP
address on the LAN statically.

To translate a single global IP address...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 97
System
Features
Port Forwarding
This function connects each Network Camera with a single global IP address and its
port number. This way, you can view the Network Camera screen from the PC on the
WA N ( I n te r n et ) si d e.

To assign a single global IP address vvv.xxx.yyy.zzz to multiple private IP addresses
192.168.0.1 and 192.168.0.2, enter as follows:
To change the priority
When you add two or more entries,Change of...

Operating Instructions
98
IP Masquerade
This function shares a single global IP address with multiple private IP addresses.
This way you can access the WAN (Internet) from multiple PCs on the LAN side using
a single global address.

xxx.yyy.zzz.103
Global IP address
for IP Masquerade function
192.168.0.1
Address Translation
192.168.0.2WAN (Internet)Address Translation 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 99
System
Features
Instructions for the data fields
EntryCheckEnabledorDisabled. When you checkEnabled,the
entry works as specified. When you checkDisabled,the
entry does not work but will work when you checkEnabled
later.
IP Address (WAN)Enter the global IP address to send or receive data to/from
the WAN side.
ProtocolSelect the protocol(s) to send or receive data to/from the
WAN side.TCP,UDP,TCP&UDP,ICMP,PPTPor are
available....

Operating Instructions
100
Notes for NAT (IP unnumbered) Setup
 When each IP address on the WAN is different in theIP Address (WAN), each IP
address on the LAN cannot overlap in theIP Address (LAN).
 Setting   in the bothProtocolandForwarding Port No.overrides the previous
settings. For example, when the data from a specific port number (10, 20, 30) is sent
to the IP addresses (192.168.0.1-3) and the other is sent to the IP address
(192.168.0.4), the fourth IP addresses (192.168.0.4) is given priority...