Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 31
Setup
PPPoE Connection (IP unnumbered)(using multiple global IP addresses)
When the ISP provides you with PPPoE Connection (IP unnumbered), follow the steps
below.
1.Click[Basic Setup]on the Setup Page.
SELECTEDis displayed next to the configuration type which is currently
selected.
2.Click[PPPoE Connection (IP unnumbered)].
Modem
PPPoE Connection
(IP unnumbered)
Global IP address
xxx.yyy.zzz.100
Global IP address
xxx.yyy.zzz.101...

Operating Instructions
32
3.EnterUser NameandPassword.
If requested by your ISP, enterService Name,Access Concentrator Name
(sometimes specified as AC Name),DNS Server 1,DNS Server 2and
Domain Name.EnterIP AddressandSubnet Maskin theIP address of
KX-HGW600.
For each input value, please refer to the account information on Page 17.

You need to enter one of the global IP addresses provided by the ISP as the IP
address of the KX-HGW600.
 To clear the current settings, click[Clear].
Note
Do not enter the...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 33
Setup
Confirming the Internet Configuration
If you can access the WWW site from your PC, the connection between the Internet and
the KX-HGW600 has been successfully made.
1.Start up your web browser.
2.Enter the address of a WWW site (e.g., http://www.panasonic.com) in the
address field of your web browser.
A WWW site appears.
If a WWW site does not appear (Page 140)
 Make sure the address of a WWW site has been correctly entered in...

Operating Instructions
34
2.2.3 Connecting your Network Camera
Setting up your Network Camera automatically
Once you connect your Panasonic Network Cameras (KX-HCM series) to the
KX-HGW600 and turn them on, the network settings such as IP address, port no. are
configured automatically by the Automatic Setup function. After completing the Internet
configuration, make sure the target Network Camera is turned off and follow the steps
below.
1.a) To connect the KX-HGW600 and Network Camera with an Ethernet...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 35
Setup
2.Turn on the Network Camera.
3.PushCLEAR SETTINGbutton on the Network Camera.
The Network Camera starts to communicate with the KX-HGW600 that control
transmission paths on the network. After that, the Network Camera screen is
registered on the Camera Portal page.
 The Automatic Setup function automatically configures the following network
settings.
 The Automatic Setup function assigns each port number and IP address in
the...

Operating Instructions
36
2.2.4 Viewing the Network Camera screen
You can view the Network Camera screen on the Camera Portal page.
1.a) Enter http://192.168.0.254(:Port No.) in the address field of your web
browser. The Camera Portal page appears.
 When port no. is 80 (default setting), you do not need to enter port no.
b) Enter the IP address(:Port No.) on the WAN in the address field of your web
browser. The Camera Portal page appears.
 When port no. is 80 (default setting), you do not need to enter...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 37
Setup
2.Click the desired image field.
The Network Camera screen appears on another web page.
If the image field on the Camera Portal page does not appear
 Make sure the indicators light green.
 The proxy server setting of your web browser may be needed to access the
Camera Portal page ( Page 126).
 Make sure the modem is turned on first, next the KX-HGW600, then the PC. 

Operating Instructions
38
2.3 LAN (Intranet) Configuration
2.3.1 Connecting to the LAN (Intranet)
Preparation
Before starting to install the KX-HGW600, make sure you have everything below.
 A Windows PC with a network card (Ethernet card or IEEE 802.11b wireless card)
installed
 An Ethernet hub on the LAN (Intranet)
 Network information for LAN (Intranet) configuration
To make note of network information for your future reference
When the network administrator requires you to use static IP address,...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 39
Setup
Connecting the KX-HGW600 to an Ethernet hub
To connect the KX-HGW600 to an Ethernet hub on the LAN (Intranet), follow the steps
below.
1.Connect the Ethernet cable to the WAN jack of the KX-HGW600.
2.Connect the other end of the Ethernet cable to one of the jacks of the Ethernet
hub.
Note
Some Ethernet hubs may have a polarity switch or need category 5 cross cable
instead of category 5 straight cable. Please refer to the...

Operating Instructions
40
Connecting a PC to the KX-HGW600
Before connecting a PC to the KX-HGW600, make sureObtain an IP address
automaticallyis checked in the TCP/IP Properties window on the PC
( Page 129) and follow the steps below.
1.Turn off the PC.
2.Connect the Ethernet cable (customer provided) to one of the LAN 1—4 jacks of
the KX-HGW600.
3.Connect the other end of the Ethernet cable to the Ethernet jack of the PC.
Note
All Ethernet jacks have an automatic MDI/MDIX feature, which means either a...