Panasonic Network Camera Kx Hcm270 Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 11
1.1.3 Authentication—System Security Feature
Authentication windowrequires you to enter the administrator/general user ID
and password for security. Password security can prevent unregistered users/
intruders from accessing your image from their web browsers. Authentication
windows are not displayed in the default. Refer to page 64 for setting up
Authentication window, the administrator ID and the password. Refer to page 66
for setting up the general user ID and the password.
Authentication window 
						

							Operating Instructions
12
1.2 Included Accessories
The following items are provided with Network Camera. Additional pieces can be
ordered by calling1-800-332-5368.
Notes
 If any items are missing, contact the dealer immediately.
 The order numbers listed above are subject to change without notice.
 Save the original carton and packing materials for future shipping and
transportation of the unit.
 Refer to page 98 and page 101 for Outdoor Cabling and Mounting.
AC Adaptor— 1 pc.
Order No. PSLP1233ZFlexible Stand— 1 pc.
Order No. PSKL1020YSunshade— 1 pc.
Order No.
PSYC1HCM230M
Setup CD-ROM— 1 pc.
Order No.
PSQX2904ZCD
Connector Cover
— 1 pc.
Order No.
PSYC2HCM230M
Putties— 1 set (4 pcs.)
Order No. PSHG1238Z
Self Bonding tape
— 1 pc.
Order No. PSHG1235ZRubber Cap— 1 pc.
Order No. PSHG1236Z
Screws— 5 pcs.
Order No. XTW3+12PVW
Screws for Flexible
Stand— 3 pcs.
Order No. PQHE5004Z 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 13
Setup CD-ROM
The setup program simplifies Network Camera installation. Adobe
®Acrobat®
Reader 4.05 or later enables you to see the Operating Instructions on the Setup
CD-ROM. If Adobe Acrobat Reader is not installed on the PC, double-click
ar405eng.exe. Refer to ReadmeEng.txt for the directory and file structure of
the Setup CD-ROM.
Notes
 Do not scratch, smudge, write or label either surfaces of the Setup CD-
ROM.SetupCD-ROMmayhaveascratchonthesurface.
 Do not leave the Setup CD-ROM in direct sunlight, near a heat source or
in a hot automobile as the Setup CD-ROM may become unreadable.
 Do not use chemicals or cleanser to clean the Setup CD-ROM as the Setup
CD-ROM may become unreadable. 
						

							Operating Instructions
14
1.3 Camera Feature Locations
1.3.1 Front View
Indicator
Indicator can be controlled onIndicator Control windowon page 88. Color
indications are shown below.
*
1Orange indicator will continue blinking in the DHCP setting.
*2Refer to page 123 for the red blinking.
Fixed Focus Lens and Pan/Tilt operation
Fixed Focus Lens can move in the Pan/Tilt operation. Operation Bar on the Single
Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens 120°
horizontally and 45° vertically. Refer to page 46 for the operation bar.
Note
Do not touch the Lens Cover. Touching it may leave a fingerprint and can
cause the image to be out of focus.Indicator
(Refer to page 88 for the setup.)
Fixed Focus Lens
1m(40inches)—Infinity
Pan:- 60° to + 60°
Tilt:0° to - 45°
The field of view in Pan/Tilt ranges horizontally
about 165° and vertically about 78°.
Antenna
Lens Cover
Power
on
Normal Operation
Updating FirmwareGetting IP address
Finish getting IP addressNot on the LAN
Orange OrangeOrange blinking*
1
Orange blinking
Pushing CLEAR SETTING button Orange blinking twice
Internal Failure of Network Camera Red blinking*2
On the LAN
Using
DHCPOrange Green
Green
Green Green blinking
Green blinking 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 15
1.3.2 Rear View
Grounding (Earth) Terminal
Lightning may cause serious damage to Network Camera. It is recommended to
connect the Ground for the protection from the lightning.
1.3.3Bottom View
External I/O
(Refer to
page 106.)
DC INjack
(Refer to
page 20.)
Ethernet port
(RJ-45)
(Refer to
page 20.)
Grounding
(Earth)
Te r m i n a l
Hook for AC
adaptor cord
(Refer to
page 99.)Antenna
(Refer to page 97.)
CLEAR SETTING button
(Refer to page 112.)
Mounting Holefor the
various mounting.
(Refer to page 103.)
Serial NumberandMAC
address
Record the serial number and
MAC address on Network
Camera Memo on page 3.
They are indispensable for
setting network parameters
after mounting Network
Camera and for future
customer servicing.
(Refer to page 29.)
Tripod Mounting Hole
(Refer to page 101.) 
						

							Operating Instructions
16
Section2
NetworkCameraSetup 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 17
2.1 Installation Procedure
Select the Network Camera configuration type. (Page 18—Page 19)
Connect Network Camera for installation. (Page 20)
Prepare the network parameters for Network Camera. (Page 21—Page 22)
Check the proxy server setting. (Page 26—Page 27)
Set up Network Camera with Setup CD-ROM. (Page 28—Page 31)
Setting up wireless network parameters. (Page 32 — Page 36)
Confirm the Network Camera Access from the Internet. (Page 37—Page 38)
Install Network Camera outdoors. (Page 96—Page 105) 
						

							Operating Instructions
18
2.2 Network Camera Configuration Type
Network Camera can be connected over the LAN/Intranet and the Internet. Select
from the four Network Camera configuration types. Network parameters differ
depending on the Network Camera configuration type.
[Ty p e 1]—LAN/Intranet Connection with an Ethernet
Switching Hub
Network Camera can be installed on the LAN/Intranet.
*
1Network traffic can be improved by using the Ethernet switching hub.
[Ty p e 2]—Internet Connection with aBroadband Router
Network Camera can be accessed from the Internet. The broadband router needs
Port Forwarding (IP Masquerade) feature on page 37.
LAN/Intranet
Ethernet switching hub*1
or wireless access point
Modem
CATV
xDSL
Optical cable
InternetWAN LANWireless
Router 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 19
[Ty p e 3 ]—Internet Direct Connection with a Modem
Network Camera can be installed alone without PC on the network. When you set 
up Network Camera in [Typ e 3 ], connect Network Camera temporarily in [Ty p e
1 ], [Ty p e 2 ]or [Ty p e 4 ].
Note 
Some xDSL services use PPPoE. Network Camera does not support PPPoE. 
If the Internet connection requires PPPoE, connect with the broadband router 
supporting PPPoE like [Ty p e 2 ].
[Ty p e 4 ]—Direct Connection with a PC
N et work  C am era  c a n  b e  c on ne cted  t o  a  P C  dir ectly .
Notes  Use a category 5 cross cable when connecting directly with the cableto the PC.
 Direct Connection with PC requires IEEE 802.11b wireless devices such as wireless LAN card and wireless USB adaptor.
 Change to AdHoc mode. (Default is Infrastructure mode.) Refer to page 32 for Infrastructure and AdHoc mode.
Modem
Internet 
						

							Operating Instructions
20
2.3 How to turn on Network Camera for
Installation
Network Camera is powered up when connecting AC plug to the power outlet.
1.Connect Category 5 straight/cross cable to the Ethernet port of Network
Camera to the hub or PC.
 Connect Ethernet cable first to make Network Camera recognize the wired
communication.
2.Connect the DC plug of the AC adaptor to the DC IN jack and the AC plug of
the AC adaptor to the power outlet to turn on Network Camera. Indicator blinks
and the Pan/Tilt moves to the center position.
Notes
 AC adaptor is used as the main disconnect device, so ensure that the
power outlet is located/installed near the equipment and is easily
accessible.
 Use only the specified Panasonic AC adaptor PSLP1233 (Order No.
PSLP1233Z).
 When you set up Network Camera in[Typ e 3], connect it temporarily in
[Ty p e 1],[Ty p e 2]or[Ty p e 4].
 When Indicator is orange, confirm that the Ethernet cable is properly
connected, or PC, Ethernet hub or broadband router is properly working.
DC IN
jack
AC adaptor
Power
Outlet
Ethernet
portDC Plug
1.2.
Category 5 straight/cross cableTo Network