Panasonic Network Camera Kx Hcm270 Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 111
Section5
Specifications and Troubleshooting 
						

							Operating Instructions
112
5.1 Network Camera Reset Procedure—Default
Settings
If the user forgets settings or passwords, Network Camera can be easily reset to
the default settings. The CLEAR SETTING button initializes all the parameters
except Date and Time setting.
With power on
,presstheCLEAR SETTING buttonfor about one second.
Indicator changes such asOrange blinking twice–>Turning off about 15
seconds. Initializing takes about one minutes. Pan/Tilt motors will set to the home
position.
Notes
 Wireless network parameters, IP address and Subnet Mask will be also
set to factory default. Wireless network parameters must be
reconfigured.
 WhenpressingtheCLEAR SETTING button, all buffered images are
cleared.
 Rubber Cap must be installed in the CLEAR SETTING button hole. It
protects the Network Cameras internal components from moisture
damage.
7) 6)
5)
CLEAR SETTING button
(Press the button with a
pointed object.)Put the Rubber
Cap back tightly
to prevent the
water from
getting in.
1) 2)
3)4)
Carefully insert the Rubber Cap into the
hole, gently pressing it into place using
the end of the long tool. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 113
5.2 Default Settings List
No ItemsFactory Default
valueIndispensable setting Note1 Network1. Network Configuration Checked - -
3. Port No. 80 - 1–65535
Static : IP Address 192.168.0.253 If necessary
If necessary
If necessary(*1)
(*1)
(*1)
(*1)Static : Subnet Mask 255.255.255.0DHCP : Host Name [Blank] (*3) 0 to 63 Characters
4. Default Gateway [Blank] Required when using Gateway
5. DNS Server1 & DNS server 2 [Blank] Required when using DNS6. DDNS No check -
Required when using DDNS-
Your e-mail address [Blank] (*4) 5 to 255 Characters
7. Max Bandwidth usage (Mbps) Unlimited -
0.1, 0.2, 0.3, 0.5, 1.0, Unlimited
2 Name/Time1. Camera Name NetworkCamera - (*3) and (*7) 1 to 15 Characters
2. Date and Time
(AM/PM, 24H)AM/PM - -2. Date and Time
(Year/Month/Day/Hour/Minute)No changing - -3.
Auto Adjustment
No check - -
3
NTP Server Address or Host Name
[Blank] - (*1) or (*3) 1 to 255 Characters
Time Zone GMT-05:00 - -
1. Authentication Enable None - -
Security:
Administrator
2. ID   [Blank] Required when setting Authentication
Required when setting Authentication
Required when setting Authentication(*3) 4 to 15 Characters
Password [Blank] (*3) 4 to 15 CharactersRetype Password [Blank] (*3) 4 to 15 Characters
2. Wireless Mode Infrastructure
Required when using wireless mode
Infrastructure, AdHoc
Channel 6
Required when using Ad-hoc mode
1–11
SSID [Blank] -
-
--
Auto, 1, 2, 5.5, 11 Mbps Speed AutoEncryption None None, 40, 128 bitAuthentication Shared  Key - Shared Key, Open System
Default Key 1 - 1, 2, 3, 4 
						

							Operating Instructions
114
No ItemsFactory Default
valueIndispensable setting Note
320 x 240 - 160 x 120, 320 x 240, 640 x 480
Image Quality Standard -Favor Clarity, Standard,
Favor MotionRefresh Interval
30 s-10, 15, 20, 25, 30,45 s,
1, 2, 3, 5 min
320 x 240 - 160 x 120,320 x 240
Image Quality Standard -Favor Clarity, Standard,
Favor Motion
5. Limit time of Continuous Motion JPEG
Unlimited - 10 s—Unlimited
6. Always/Operational betweenAlways - -
0h 0min — 0h 0min - -
All checked - -
Time1—4
Day-of-the-week setting Refresh Interval
30 s-10, 15, 20, 25, 30,45 s,
1, 2, 3, 5 min
3. Single Camera Image Resolution
4. Multi-Camera Image Resolution
6 Image Transfer
1. Trigger SettingNon transfer - -
1. Non transferEnable - -
Always - -
1. Alarm
Start time 00:00:00 - -
Stop time 23:59:59 - -Day-of-the-week setting All checked - -Alarm enable condition Rising - -(2)Secondary Time No check - -Alarm enable condition, Rising - -
2. Capture Control
2. (1) Always/Operational between
5
Top View Image
Setting
1. Language English (US) -French, German, Italian,
Spanish, Japanese, etc.
2. Top Page title [Blank] -
-
-
(*6) and (*7) 0 to 63 Characters
Image URL [Blank] (*8) 0 to 127 Characters
Link URL [Blank] (*8) 0 to 127 Characters
4(1.) User ID List No entry - -
Security:
General User
(2.) New User: ID [Blank] Required when setting General User
Required when setting General User
Required when setting General User(*3) 4 to 15 Characters
New User: Password [Blank] (*3) 4 to 15 CharactersNew User: Retype Password [Blank] (*3) 4 to 15 Characters 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 115
No ItemsFactory Default
valueIndispensable setting Note6 1. Alarm
5.
Non Transfer without Memory Over Write
Non Transfer with Memory Over Write
Selected - -Not-selected - -
FTP Not-selected - -
Server Address or
Host Name[Blank] Required when using FTP
Required when using FTP
Required when using FTP(*1) or (*3) 1 to 255 CharactersPort No. (Usually Use 21) 21Login ID [Blank] If necessary
If necessary(*3) 0 to 63 CharactersPassword [Blank] (*3) 0 to 63 CharactersUpload File Name [Blank] (*3) 1 to 234 Characters- Login timing Every Time Every Time, One TimeOver write settingOver Write to Fixed
Upload File Name-Mail Not-selected - - Data transfer method Passive Mode Passive Mode, Active Mode--SMTP Server Address or Host Name [Blank] Required when using Mail
Required when using POP authentication
Required when using POP authentication
POP3 Server Address or Host Name [Blank] (*1) or (*3) 1 to 255 CharactersLogin ID [Blank] (*3) 0 to 63 CharactersPassword [Blank] (*3) 0 to 63 Characters
Required when using POP authentication
(*1) or (*3) 1 to 255 Characters
Required when using Mail
Required when using Mail From (Reply) [Blank] (*4) 5 to 63 Characters
To [Blank] (*4) 5 to 63 CharactersSubject [Blank] (*2) and (*7) 0 to 44 CharactersText [Blank] (*2) and (*7) 0 to 63 Characters
-
-
1  65535
4. (1)Pre-alarm Image Buffer No check - -
Image Frequency 1 Image/Hour -
-1—15
Maximum number of image per
each trigger11—3000(2)Post-alarm Image Buffer Checked - -Image Frequency 1 Image/Hour -
-1—15Maximum number of image per
each trigger1
1—3000
320 x 240 - 160 x 120, 320 x 240, 640 x 480
(2) Image Quality Standard -Favor Clarity, Standard,
Favor Motion
3. (1) Image Resolution 
						

							Operating Instructions
116
No ItemsFactory Default
valueIndispensable setting Note
1. TimerAlways - -
Start time 00:00:00 - -Stop time 23:59:59 - -Day-of-the-week setting All checked - -(2) Secondary Time No check - -
320 x 240 - 160 x 120, 320 x 240, 640 x 480
(2) Image Quality Standard -Favor Clarity, Standard,
Favor MotionFrequency1 Image/Hour -
1—15
(2) Secondary Image Buffer 
Frequency1 Image/Hour -
1—15
2. (1) Always/Operational between
3.   (1) Image Resolution
4.   (1) Primary Image Buffer 
5.
Non Transfer without Memory Over Write
Non Transfer with Memory Over Write
Selected - -Not-selected - -
FTP Not-selected - -
Server Address or Host Name [Blank] Required when using FTP
Required when using FTP(*1) or (*3) 1 to 255 CharactersPort No. (Usually Use 21) 21Login ID [Blank] (*3) 0 to 63 CharactersPassword [Blank] (*3) 0 to 63 Characters
Every Time, One TimeUpload File Name [Blank] Required when using FTP (*3) 1 to 234 CharactersData transfer method
- -
Over write settingOver Write to Fixed 
Upload File Name--
1  65535
If necessary
If necessary
Login timingEvery Time
Required when using POP authentication
Required when using POP authentication
POP3 Server Address or Host Name [Blank] (*1) or (*3) 1 to 255 Characters
Login ID [Blank] (*3) 0 to 63 CharactersPassword [Blank] (*3) 0 to 63 Characters
Required when using POP authentication
Required when using Mail 6. No Message Selected - -
Mail Not-selected - -
SMTP Server Address or Host Name [Blank] (*1) or (*3) 1 to 255 Characters
Required when using Mail
Required when using Mail
-
- From (Reply) [Blank] (*4) 5 to 63 Characters
To [Blank] (*4) 5 to 63 CharactersSubject [Blank] (*2) and (*7) 0 to 63 CharactersText [Blank] (*2) and (*7) 0 to 63 Characters
6 1. Alarm
Passive Mode Passive Mode, Active Mode 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 117
No ItemsFactory Default
valueIndispensable setting Note7
1. White Balance AutoAuto, Fixed (Indoor/Fluorescent_1/
Fluorescent_2/Outdoor), Hold
Camera
Setup
2. Power Line Frequency 60 Hz 60 Hz, 50 Hz
3. Brightness Control
4. Pan/Tilt/Preset ControlEnable
Enable-
- - -
-
-5. Preset Program Control Enable - -
-
- 6. Pan Range (Minimum)
7. Tilt Range (Minimum)-60 degree -60 — +60 degree, current 
-60 — +60 degree, current 
(Home Position) 0 degree -(Maximum) +60 degree
-
- -45 degree - -45 — 0 degree, current 
(Home Position) -3 degree -45 — 0 degree, current (Maximum) 0 degree -45 — 0 degree, current 
-60 — +60 degree, current 
Mail Not-selected--
SMTP Server Address or Host Name [Blank]
Required when using Mail(*1) or (*3) 1 to 255 Characters
-
- Required when using Mail
Required when using Mail From (Reply) [Blank] (*4) 5 to 63 Characters
To [Blank] (*4) 5 to 63 Characters
Subject [Blank] (*2) 
and (*7) 
0 to 44 Characters
Text [Blank] (*2) 
and (*7) 
0 to 63 Characters
Required when using POP authentication
Required when using POP authentication
POP3 Server Address or Host Name [Blank] (*1) or (*3) 1 to 255 Characters
Login ID [Blank] (*3) 0 to 63 CharactersPassword [Blank] (*3) 0 to 63 Characters
Required when using POP authentication
1. Timer 
						

							Operating Instructions
118
No ItemsFactory Default
valueIndispensable setting Note
-
10 Indicator Control
1. Turn on the Indicator during Power ON
Selected
1. Turn on the Indicator during Camera access
Not-selected - --
1. Turn off the Indicator always Not-selected - -
(*1): Address must be composed of four numeral characters (0 to 255) and divided with 3 dots, such as 192.168.0.253. (Cannot use 0.0.0.0 and 255.255.255.255)
(*2): Only [] is unavailable in the ASCII characters.
(*3): [Space], [], [], [#], [&], [%], [=], [+], [?], [] and [:] are not available in the ASCII characters.
(*4): [Space], [], [], [#], [&], [%], [=], [+], [?], [] and [:] are not available in the ASCII characters and the character set is like [text] + [@] + [text] + [.] + [text]
(*5): [Space], [], [], [#], [&], [%], [=], [+], [?], [] are not available in the ASCII characters.
(*6): [], [], [#], [&], [%], [=], [+], [?], [] and [:] are not available in the ASCII characters.
(*7): ISO-8859-1 character set for West European language and Shift-JIS character set for Japanese are available.
(*8): Only [space] and [] are unavailable in the ASCII characters.11 Update FirmwareFile Name [Blank]Required when using Update Firmware -8 Multi-Camera
Required when using Multi-Camera--
- No check
IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 Characters 1. 2nd Network Camera
Required when using Multi-Camera
Required when using Multi-Camera
Required when using Multi-Camera
Required when using Multi-Camera
Required when using Multi-Camera Camera Name [Blank] (*3) 
and (*7)
 1 to 15 Characters
2. 3rd Network Camera No check - -
IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 Characters
Camera Name [Blank] (*3) 
and (*7)
 1 to 15 Characters
3. 4th Network Camera No check - -
IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 Characters
Camera Name [Blank] (*3) 
and (*7) 
1 to 15 Characters
9
External Output
Control1. Open/Short to GND Open
-
Preset Button
Preset Button
Preset Button
Preset Button-
Preset Buttons1
Upper Left
Upper Right
Lower RightLower Left
2
- (*3) 
and (*7) 
1 to 15 Characters (*3) 
and (*7) 
1 to 15 Characters
3-
-(*3) 
and (*7) 
1 to 15 Characters
4(*3) 
and (*7) 
1 to 15 Characters 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 119
5.3 Specifications
Network Camera Specifications
Other SpecificationItem Description
Pan/Tilt Angle Pan: -60° to +60°, Tilt: 0° to -45°
Sensor Type 1/3 inch CMOS
Number of Pixels 320,000 pixels (Effective Pixels)
Illumination 10—10,000 lx
White Balance Auto/Manual/Hold
Adjustment Brightness, White balance
Focus Fixed 1 m (40 inches)—Infinity
Caliber Ratio (F No.) F1.8
Horizontal Angle 45°
Exposure Auto
Item Description
Splash Resistant Standard IPX4
Video Compression JPEG/3 Levels
Video Resolution 640 x 480, 320 x 240 (default), 160 x 120
Buffered Image*
1About 560 frames (320 x 240) with time display
Magnification 100% or 150%
Frame rate (in 60 Hz)*
2Max. 7.5 frames/second (640 x 480)
Max. 15 frames/second (320 x 240)
Max. 15 frames/second (160 x 120)
Supported Protocols TCP, UDP, IP, HTTP, FTP, SMTP, POP3, DHCP,
DNS,DDNS,ARP,ICMP,NTP
Message Transferring Condition When detecting the alarm 
						

							Operating Instructions
120
Message Transferring Method SMTP
Image Transferring Condition Timer: Day of the Week/Hour/Minute/Second
Alarm: External Sensor Input
Image Transferring Method SMTP, FTP
LAN Interface 10Base-T Ethernet RJ-45 connector x 1
Wireless LAN Interface Protocol: IEEE 802.11b
Antenna: Diversity Antenna
Frequency: 2400—2483.5 MHz (11 channels)
Modulation: Direct Sequence Spread Spectrum
Media Access Protocol: CSMA/CA+ACK
External I/O*
3External Sensor Input x 1
External Device Control Output x 1
Indicator Display Power/Network Communication/
Network Camera operation
Dimension (HWD) 116 mm (4.57 inches) x 116 mm (4.57 inches) x 88
mm (3.46 inches)
Excluding the antenna and protruding objects
Weight
570 (1.26 lb.) (Only the unit)
Power AC adaptor: Input 120 V AC, 60 Hz
Output 12 V DC, 780 mA
Consumption: 6.5 W (8 W in Pan/Tilt Scan)
Condition Operation temperature: -20 °C to +50 °C
(-4°Fto+122°F)
Storage temperature: -25 °C to +60 °C
(-13°Fto+140°F)
Humidity: 20% to 90% (No Condensation)
*
1The maximum number of frames depends on the image quality and the object
situationinBufferedImage.
*
2Frame rate varies with the network condition, the PC performance, the image
quality and the object situation.
*
3A sensor must be attached to Network Camera in order to utilize the alarm
trigger.Item Description