Home > Panasonic > Camera > Panasonic Network Camera Kx Hcm230 Operating Instructions

Panasonic Network Camera Kx Hcm230 Operating Instructions

Here you can view all the pages of manual Panasonic Network Camera Kx Hcm230 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 61

Operating Instructions
[For assistance, please call: 1-800-272-7033] 61
Instructions for the data fields
Authentication
EnableAuthentication window can be set in the three patterns.
None: No authentication window appears. Anyone can
access all screens (Single Camera/Multi-Camera screen)
and pages (Top Page and Setup Page).
Administrator only: Authentication window appears when
accessing Setup Page. Authentication window does not
appear when accessing Top Page.
Administrator and General User:...

Page 62

Operating Instructions
62
3.5.5 Security: General User
Security: General User windowallows the administrator to create the general
user ID and password for the security level defined as general user. Up to 30
individual user names can be defined. The various security levels are explained
on page 61.
1.Click[Security: General User]on Setup Page.
2.Enter each parameter in the proper data field. Click[Save]when finished.
Click[Cancel]to leave the current settings unchanged. The window
returns to Setup Page...

Page 63

Operating Instructions
[For assistance, please call: 1-800-272-7033] 63
Instructions for the data fields
General User
AuthenticationTheGeneralUsercanbeupto30.Eachofthemcan
have their own ID and password.
(1) User ID List User ID List displays the registered user name.
[Delete]and[Modify]deletes/modifies the general
user in the list. Select the desired user and click
[Delete]or[Modify].
(2) New UserEnter the general user ID, password and reenter the
password to confirm. The password should be difficult...

Page 64

Operating Instructions
64
3.5.6 Top View Image
Top View Image Setting windowcan change settings for Top Page, Single
Camera and Multi-Camera screen such as the initial language, the image
resolution, image quality, refresh interval as the initial setting,Limit time of
Continuous Motion JPEGandOn the Air time.
1.Click[To p V i e w I m a g e]on Setup Page.
2.Select the each parameter. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the...

Page 65

Operating Instructions
[For assistance, please call: 1-800-272-7033] 65
Instructions for the data fields
To p P a g e Top Page title can be changed. Enter the new title.
 Refer to unavailable character set 1 on page 103 but [space]
is available.
 Refer to displayable character set on page 104.
 Network Camera picture on Top Page can be changed.
Enter the URL (http://) to display the picture on the specified
web site.
 Only [space] and [] are unavailable in the ASCII character
tableonpage103.
...

Page 66

Operating Instructions
66
3.5.7 Image Transfer
Image Transfer windowcan set the Image Transfer feature. Network Camera can
buffer images and send the images via e-mail or FTP. The request to send the
image is initiated by a contact closure from the external sensors/devices
connected to the External I/O using the Alarm mode. The external sensors/
devices are customer provided. The images can also be sent in the interval of time
using the Timer mode. Make sure Date and Time has been configured. Refer to...

Page 67

Operating Instructions
[For assistance, please call: 1-800-272-7033] 67
Non Transfer mode
Non Transfer mode enables[Start Capture]on the operation bar to buffer the
image on the Single Camera screen. Refer to page 46. Capture Control can lock
[Start Capture]on the operation bar to prevent the user from capturing the
Buffered Image. Click[ClearBuffered images]to clear the buffered image.
[ClearBuffered images]does not save the parameters.
1.Click[Image Transfer]on Setup Page.
2.Select the each parameter....

Page 68

Operating Instructions
68
Transfer in the Alarm Mode
TheAlarmmodecantransferanimageviae-mailorFTPwhenthealarmtrigger
is active. To activate the alarm trigger, the External Sensor Input of External I/O
must be connected with the external sensors/devices. The Alarm mode can send
the e-mail without transferring the image. The Alarm mode uses the Network
Camera internal clock. Make sure Date and Time has been configured. Refer to
page 58 about Date and Time.
1.Click[Alarm]on theImage Transfer window.
c. b....

Page 69

Operating Instructions
[For assistance, please call: 1-800-272-7033] 69
Instructions for the data fields
a.External Sensor Input of External I/O activates the alarm trigger. Refer
to page 101.
b.Active Time of Trigger
The active trigger time can be set in the primary time and the
secondary time. The secondary time is the supplement of the primary
time.
Always: always activates the alarm trigger.
Operational between: Sets the start and stop time of the primary time.
The day of the week can be set by...

Page 70

Operating Instructions
70
a.SelectsTransfer Method.
Non Transfer without Memory Over Write:
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write:
Buffered image will overwrite the older image data when the internal
memory is full.
FTP: Enters the server address*
1or Host Name*2, Port Number (1—
65535), Login ID*2and password*2to access the FTP server and
upload file name*2including full path. Time in 24 h mode is attached on
theuploadfilename.
Login timing:...
Start reading Panasonic Network Camera Kx Hcm230 Operating Instructions

Related Manuals for Panasonic Network Camera Kx Hcm230 Operating Instructions

All Panasonic manuals