Panasonic Network Camera Kx Hcm230 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 71
Over write setting:
Selects [Over Write...] to overwrite the transferred image or [Add
time...] to save each transferred image.
Data transfer method:
Use [Passive Mode] normally. If FTP does not work properly, ask your
ISP or network administrator about the transferring mode of FTP
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1or Host Name*2,
Login ID*2and Password*2.
From...

Operating Instructions
72
Setting Example
b.a.
c.
d.
e.
f. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 73
Setting explanation
a.The active time of trigger is set between 9:00 AM to 6:00 PM from
Monday to Friday.
When the alarm occurs in the setting time, the images are transferred
to FTP server, and the notification is sent to the specified user via e-
mail.
The alarm trigger is on when the sensor signal is changed to the
[Rising] (GND to Open High) of External Sensor Input of External I/O.
b.The secondary time is set inactive.
c.The...

Operating Instructions
74
Transfer in the Timer Mode
The timer mode can be activated by entering the active time, the image setting,
frequency setting and the transfer method onImage Transfer window.Buffered
Image can also be transferred via e-mail or FTP. The timer mode uses the Network
Camera internal clock. Make sure Date and Time has been configured. Refer to
page 58 about Date and Time.
1.Click[Timer]on the Image Transfer window.
b.
c.
d.
e. a. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
Instructions for the data fields
a.Buffers or transfers by the timer trigger.
b.Active Time of Trigger
Always: always activates the timer trigger. The timer trigger interval
can be set ine. ImageBuffer Frequency Setting.
Operational between: Sets the start and stop time of the primary time.
The day of the week can be set by checking. If the setting time passes
over midnight, check the check box of only the day of start time. Start...

Operating Instructions
76
a.SelectsTransfer Method.
Non Transfer without Memory Over Write:
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write:
Buffered image will overwrite the older image data when the internal
memory is full.
[Primary]or[Secondary]on the operation bar can be displayed to
view the Buffered Image screen in Non Transfer setting.
FTP: Enters the server address*
1or Host Name*2, Port Number (1—
65535), Login ID*2and password*2to access the FTP...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 77
Over write setting:
Selects [Over Write...] to overwrite the transferred image or [Add
time...] to save each transferred image.
Data transfer method:
Use [Passive Mode] normally. If FTP does not work properly, ask your
ISP or network administrator about the transferring mode of FTP
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1or Host Name*2,
Login ID*2and Password*2.
From...

Operating Instructions
78
3.5.8 Camera Setup
Camera Setup windowsets White Balance and Power Line Frequency. You can
lock the Brightness, Pan/Tilt/Preset, Preset Program, Control features. You can
also select the Pan Range and Tilt Range.
1.Click[Camera Setup]on Setup Page.
2.Select the each parameter in the proper data field. Click[Save]when finished.
 The lens moves to the home position you have registered.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 79
Instructions for the data fields
WhiteBalance Notes
 The wrong White Balance setting will cause Network
Camera to display colors improperly. In most casesAutois
suggested.
 WhiteBalanceisalsoregisteredinpresetprogramming.
Power Line
FrequencyIt can select Flicker Correction by power line frequency.
 60 Hz (default)  50 Hz
Select 60 Hz in the United States.
Brightness
ControlBrightness Control can be locked....

Operating Instructions
80
Specifying the Pan/Tilt range
1.Start up the web browser and access the Single Camera screen.
2.Start up another web browser and access Camera Setup window.
3.Align the Single Camera screen and Camera Setup window from side to side.
4.Adjust the Pan operation on the Single Camera screen and select[Current]in
the minimum value data field of the Pan range on Camera Setup window. The
data field refreshes to read the current value of the Pan range.
5.Specify the each home...