Panasonic Network Camera Kx Hcm230 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Kx Hcm230 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
3.5.9 Multi-Camera
Multi-Camera windowenables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the image. First Network Camera is named...](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-80.png "Page 81
Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
3.5.9 Multi-Camera
Multi-Camera windowenables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the image. First Network Camera is named...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 81 3.5.9 Multi-Camera Multi-Camera windowenables the setting of Multi-Camera screen. Camera Name and IP address of each Network Camera must be entered to view the Multi- Camera screen. Registering IP addresses of the other Network Camera enables you to view on the Multi-Camera screen. Clicking Camera Name of Network Camera on the Multi-Camera screen accesses the Single Camera screen to control the image. First Network Camera is named...
Page 82
![Page 82
Operating Instructions
82
2.Select/Enter the each parameter. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters.
*
1RefertoIPaddressingonpage103.
*
2Refer to unavailable character set 1 on page 103 but [:] is available.
*
3Refer to unavailable character set 1 on page 103 and refer to displayable
character set on page 104.Instructions for the data fields
Enable check boxThecheckedcameraimagecanbeseenontheMulti-
Camera...](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-81.png "Page 82
Operating Instructions
82
2.Select/Enter the each parameter. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters.
*
1RefertoIPaddressingonpage103.
*
2Refer to unavailable character set 1 on page 103 but [:] is available.
*
3Refer to unavailable character set 1 on page 103 and refer to displayable
character set on page 104.Instructions for the data fields
Enable check boxThecheckedcameraimagecanbeseenontheMulti-
Camera...")
Operating Instructions 82 2.Select/Enter the each parameter. Click[Save]when finished. Click[Cancel]to quit the current settings. The window returns to Setup Page without saving the parameters. * 1RefertoIPaddressingonpage103. * 2Refer to unavailable character set 1 on page 103 but [:] is available. * 3Refer to unavailable character set 1 on page 103 and refer to displayable character set on page 104.Instructions for the data fields Enable check boxThecheckedcameraimagecanbeseenontheMulti- Camera...
Page 83
![Page 83
Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
3.5.10 External Output Control
External Output Control windowenables the External Device Control Output
signal to activate the external sensors/devices. (Open or Short to GND) The
network administrator should set up this setting.
Note
Refer to page 101 for Interfacing to the External I/O.
1.Click[External Output Control]on Setup Page.
2.Check[Open]means the External Device Control Output becomes high
impedance (open collector)....](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-82.png "Page 83
Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
3.5.10 External Output Control
External Output Control windowenables the External Device Control Output
signal to activate the external sensors/devices. (Open or Short to GND) The
network administrator should set up this setting.
Note
Refer to page 101 for Interfacing to the External I/O.
1.Click[External Output Control]on Setup Page.
2.Check[Open]means the External Device Control Output becomes high
impedance (open collector)....")
Operating Instructions [For assistance, please call: 1-800-272-7033] 83 3.5.10 External Output Control External Output Control windowenables the External Device Control Output signal to activate the external sensors/devices. (Open or Short to GND) The network administrator should set up this setting. Note Refer to page 101 for Interfacing to the External I/O. 1.Click[External Output Control]on Setup Page. 2.Check[Open]means the External Device Control Output becomes high impedance (open collector)....
Page 84
![Page 84
Operating Instructions
84
3.5.11 Indicator Control
Indicator Control windowallows you to select Indicator operation. Indicator
operation has three patterns.
Alwayson
Turns on when accessing Network Camera
Alwaysoff
Notes
Indicator can be controlled in case the administrator does not want to
draw attention to Network Camera. This may be desirable when used
for security applications.
Refer to page 14 for the Indicator color indication.
1.Click[Indicator Control]on Setup Page.
2.Select the Indicator...](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-83.png "Page 84
Operating Instructions
84
3.5.11 Indicator Control
Indicator Control windowallows you to select Indicator operation. Indicator
operation has three patterns.
Alwayson
Turns on when accessing Network Camera
Alwaysoff
Notes
Indicator can be controlled in case the administrator does not want to
draw attention to Network Camera. This may be desirable when used
for security applications.
Refer to page 14 for the Indicator color indication.
1.Click[Indicator Control]on Setup Page.
2.Select the Indicator...")
Operating Instructions 84 3.5.11 Indicator Control Indicator Control windowallows you to select Indicator operation. Indicator operation has three patterns. Alwayson Turns on when accessing Network Camera Alwaysoff Notes Indicator can be controlled in case the administrator does not want to draw attention to Network Camera. This may be desirable when used for security applications. Refer to page 14 for the Indicator color indication. 1.Click[Indicator Control]on Setup Page. 2.Select the Indicator...
Page 85
![Page 85
Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
3.5.12 Status
Status windowdisplays general information about Network Camera.
Note
When some trouble occurs, the information is useful.](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-84.png "Page 85
Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
3.5.12 Status
Status windowdisplays general information about Network Camera.
Note
When some trouble occurs, the information is useful.")
Operating Instructions [For assistance, please call: 1-800-272-7033] 85 3.5.12 Status Status windowdisplays general information about Network Camera. Note When some trouble occurs, the information is useful.
Page 86
![Page 86
Operating Instructions
86
3.5.13 Restart
Restart windowrestarts Network Camera with the parameters saved. Restarting
is required when the network parameters are changed.
1.Click[Restart]on Setup Page.
2.Click[Restart Now!].
Click[Cancel]to quit. The window returns to the Setup Page.](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-85.png "Page 86
Operating Instructions
86
3.5.13 Restart
Restart windowrestarts Network Camera with the parameters saved. Restarting
is required when the network parameters are changed.
1.Click[Restart]on Setup Page.
2.Click[Restart Now!].
Click[Cancel]to quit. The window returns to the Setup Page.")
Operating Instructions 86 3.5.13 Restart Restart windowrestarts Network Camera with the parameters saved. Restarting is required when the network parameters are changed. 1.Click[Restart]on Setup Page. 2.Click[Restart Now!]. Click[Cancel]to quit. The window returns to the Setup Page.
Page 87
![Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
3.5.14 Update Firmware
Update Firmware windowallows the user to install the latest version of the
Network Camera internal operating system. In most cases, this will never be
necessary. Changes may be necessary to accommodate new operating systems
or new web browsers that are not shown on page 10. In those cases, Update
Firmware would be available from the Network Camera Technical Support Site at
http://panasonic.co.jp/pcc/en/. Check...](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-86.png "Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
3.5.14 Update Firmware
Update Firmware windowallows the user to install the latest version of the
Network Camera internal operating system. In most cases, this will never be
necessary. Changes may be necessary to accommodate new operating systems
or new web browsers that are not shown on page 10. In those cases, Update
Firmware would be available from the Network Camera Technical Support Site at
http://panasonic.co.jp/pcc/en/. Check...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 87 3.5.14 Update Firmware Update Firmware windowallows the user to install the latest version of the Network Camera internal operating system. In most cases, this will never be necessary. Changes may be necessary to accommodate new operating systems or new web browsers that are not shown on page 10. In those cases, Update Firmware would be available from the Network Camera Technical Support Site at http://panasonic.co.jp/pcc/en/. Check...
Page 88
![Page 88
Operating Instructions
88
4.Click[Update Firmware]on Setup Page.
5.Click[Update Firmware].
Wait about one minute.
Note
If you click[Update Firmware], operation cannot be canceled. If canceled,
refertopage119.](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-87.png "Page 88
Operating Instructions
88
4.Click[Update Firmware]on Setup Page.
5.Click[Update Firmware].
Wait about one minute.
Note
If you click[Update Firmware], operation cannot be canceled. If canceled,
refertopage119.")
Operating Instructions 88 4.Click[Update Firmware]on Setup Page. 5.Click[Update Firmware]. Wait about one minute. Note If you click[Update Firmware], operation cannot be canceled. If canceled, refertopage119.
Page 89
![Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
6.Click[Browse...]to select the firmware from the file selector.
A dialog box appears to choose the file.
7.Select a desired Firmware file (including the path information) and click
[Open].
8.Make sure the desired firmware file name is selected correctly, and click
[Update Firmware].
Restarting window is displayed, and Network Camera restarts
automatically.
Restart operation takes about one minute.
Confirm that the Update Firmware...](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-88.png "Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
6.Click[Browse...]to select the firmware from the file selector.
A dialog box appears to choose the file.
7.Select a desired Firmware file (including the path information) and click
[Open].
8.Make sure the desired firmware file name is selected correctly, and click
[Update Firmware].
Restarting window is displayed, and Network Camera restarts
automatically.
Restart operation takes about one minute.
Confirm that the Update Firmware...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 89 6.Click[Browse...]to select the firmware from the file selector. A dialog box appears to choose the file. 7.Select a desired Firmware file (including the path information) and click [Open]. 8.Make sure the desired firmware file name is selected correctly, and click [Update Firmware]. Restarting window is displayed, and Network Camera restarts automatically. Restart operation takes about one minute. Confirm that the Update Firmware...
Page 90
![Page 90
Operating Instructions
90
3.5.15 Reset to Factory Default
Reset to Factory Default windowinitializes all the parameters including the ID,
Password, IP address and Subnet Mask except Date and Time setting to the
factory default. Reconfirm the settings before doing the Reset to Factory Default
operation.
1.Click[Reset to Factory Default]on Setup Page.
2.Click[Execute].
Indicator changes such asOrange blinking twice–>Tu r n i n g o f f
about 15 seconds. Initializing takes about one minute....](http://img.usermanuals.tech/thumb/58/66637/w300_kx-hcm230_en_om_d-89.png "Page 90
Operating Instructions
90
3.5.15 Reset to Factory Default
Reset to Factory Default windowinitializes all the parameters including the ID,
Password, IP address and Subnet Mask except Date and Time setting to the
factory default. Reconfirm the settings before doing the Reset to Factory Default
operation.
1.Click[Reset to Factory Default]on Setup Page.
2.Click[Execute].
Indicator changes such asOrange blinking twice–>Tu r n i n g o f f
about 15 seconds. Initializing takes about one minute....")
Operating Instructions 90 3.5.15 Reset to Factory Default Reset to Factory Default windowinitializes all the parameters including the ID, Password, IP address and Subnet Mask except Date and Time setting to the factory default. Reconfirm the settings before doing the Reset to Factory Default operation. 1.Click[Reset to Factory Default]on Setup Page. 2.Click[Execute]. Indicator changes such asOrange blinking twice–>Tu r n i n g o f f about 15 seconds. Initializing takes about one minute....