Panasonic Network Camera Kx Hcm230 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 111
No ItemsFactory Default
valueIndispensable setting Note
1. TimerAlways - -
Start time 00:00:00 - -Stop time 23:59:59 - -Day-of-the-week setting All checked - -(2) Secondary Time No check - -
320 x 240 - 160 x 120, 320 x 240, 640 x 480
(2) Image Quality Standard -Favor Clarity, Standard,
Favor MotionFrequency1 Image/Hour -
1—15
(2) Secondary Image Buffer 
Frequency1 Image/Hour -
1—15
2. (1) Always/Operational between
3. (1) Image...

Operating Instructions
112
No ItemsFactory Default
valueIndispensable setting Note71. White Balance AutoAuto, Fixed (Indoor/Fluorescent_1/
Fluorescent_2/Outdoor), Hold
Camera
Setup
2. Power Line Frequency 60 Hz 60 Hz, 50 Hz
3. Brightness Control
4. Pan/Tilt/Preset ControlEnable
Enable-
- - -
-
-5. Preset Program Control Enable - -
8 Multi-Camera
-
-
Required when using Multi-Camera
6. Pan Range (Minimum)
7. Tilt Range (Minimum)-60 degree -60 — +60 degree, current 
-60 — +60 degree, current (Home...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 113
No ItemsFactory Default
valueIndispensable setting Note
-
10 Indicator Control
1. Turn on the Indicator during Power ON
Selected
1. Turn on the Indicator during Camera access
Not-selected - --
1. Turn off the Indicator always Not-selected - -
(*1): Address must be composed of four numeral characters (0 to 255) and divided with 3 dots, such as 192.168.0.253. (Cannot use 0.0.0.0 and 255.255.255.255)
(*2): Only [] is unavailable in the...

Operating Instructions
114
5.3 Specifications
Network Camera Specifications
Other SpecificationItem Description
Pan/Tilt Angle Pan: -60° to +60°, Tilt: 0° to -45°
Sensor Type 1/3 inch CMOS
Number of Pixels 320,000 pixels (Effective Pixels)
Illumination 10—10,000 lx
White Balance Auto/Manual/Hold
Adjustment Brightness, White balance
Focus Fixed 1 m (40 inches)—Infinity
Caliber Ratio (F No.) F1.8
Horizontal Angle 45°
Exposure Auto
Item Description
Splash Resistant Standard IPX4
Video Compression JPEG/3...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 115
Message Transferring Method SMTP
Image Transferring Condition Timer: Day of the Week/Hour/Minute/Second
Alarm: External Sensor Input
Image Transferring Method SMTP, FTP
Trigger Timer: Day of the Week/Hour/Minute/Second
Alarm: External Sensor Input
Interface 10Base-T Ethernet RJ-45 connector x 1
External I/O*
3External Sensor Input x 1
External Device Control Output x 1
Indicator Display Power/Network Communication/
Network Camera...

Operating Instructions
116
5.4 Troubleshooting
About Network Camera Setup
Problem Cause and Remedy
When Setup
CD-ROM
cannot find
Network
Camera. Reconnect the AC adaptor if installation is not completed within
20 minutes.
 Do not connect Network Camera over a broadband router.
Setup program cannot detect Network Camera.
 If IP address is not assigned to the PC, setup program cannot
find Network Camera. Confirm that IP address is assigned to
the PC in the way shown on page 23. IP address of the PC can...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 117
When Top Page
does not
appear. Enter the correct IP address in the web browser.
 IP address and Subnet Mask of the PC and the Network
Camera must be in the same class of the private IP address on
the LAN. Refer to page 25.
 The network congestion prevents Top Page from appearing
quickly. Wait for a while.
 A proxy server may prevent you from connecting directly to
Network Camera, set up not to use the proxy server. Refer to
page...

Operating Instructions
118
When forgetting
the password to
access the
Setup Page.Follow the steps below.
1.Initialize Network Camera by pressing the CLEAR SETTING
button.
2.Reconfigure Network Camera.
Indicator does
not light up. Confirm that the standard AC adaptor PSLP1233 (Order No.
PSLP1233Z) is used.
 Confirm that the Indicator Control is disabled. Refer to page 84
forIndicator Control window.
Indicator is
orange. Ethernet cable is not connected properly.
 PC, Ethernet hub or broadband router is...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 119
Update
Firmware has
not finished.When Update Firmware is interrupted by power off, or for network
troubles and other problems, follow the procedure below.
*
1Refer to page 87 for the Update Firmware. About Network Camera Setup
Problem Cause and Remedy
No Top PageUpdate
Firmware
window
Yes Turn on Network Camera and the PC.
Enter the IP address on the web browser to access
Network Camera.
Top Page or Update
Firmware window?
Is the...

Operating Instructions
120
About Top View Image screen
Problem Cause and Remedy
The Top View
Image screen
(Single Camera/
Multi-Camera) does
not appear. If you are using Internet Explorer, the first time the PC
connects to Network Camera, a pop-upSecurity Warning
windowwill appear to download ActiveX Controls. When
using Windows NT, Windows 2000 or Windows XP, log on
with an appropriate account that is authorized to install
applications. Refer to page 39 for ActiveX Controls.
 On the Air time setting...