Panasonic Network Camera Kx Hcm230 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
Click to Center
When you click the certain point on the Single Camera screen, the point is
centered on the image.
1.Put the cursor on the point which should be centered and click it.
2.The clicked point is centered.
Note
Click to Centerdoes not move over the end of corner when the Pan/Tilt range
reaches the end. The Pan/Tilt operation can be locked by Pan/Tilt control on
page 78.
Cursor 

Operating Instructions
42
3.3.1 Using OperationBar
Operation bar controls the general use of Network Camera. The following sections
describe the general way of using it.
(1) End Display:When Pan/Tilt operation has reached the
end of corner,Left End,Right End,Up EndorDown
Endappears.
Locked Display:Pan/Tilt/Preset, Brightness Control and
Preset program can be locked.Lockedappears when the
operation bar is clicked.
Preset Display:Preset name appears when clicking
Preset Button.
(2) Pan/Tilt Scan,Pan/Tilt...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
3.3.2 Using Pan/Tilt Operation
Pan/Tilt scan buttons automatically move the lens horizontally from -60° to +60°
and vertically from 0° to -45°, and the lens returns to the current position. Use Click
to Center feature to stop scanning. Each surrounding arrow of Pan/Tilt moves the
lens Up, Down, Right, Left, and the home position button moves it to Home
Position.
Note
Pan/Tilt operation can be locked on Camera Setup window on page...

Operating Instructions
44
3.3.3 Setting Preset Positioning and Home Positioning
Preset positioning and Home Positioningallow you to fix the lens on a specific
point. This feature can memorize Brightness and White Balance settings. The
preset buttons (1—4) are registered in the factory default.
(1: Upper Left,2: Upper Right,3: Lower Left,4: Lower Right)
All eight preset buttons and home position button can be overridden. Lens moves
to the preset/home position when clicking each registered button....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
Deleting the preset buttons
1) Click[Program]. Red cancel button appears.
[Cancel]links to the Single Camera
screen without deleting.
2) Select the preset number to delete.
3) Click[Delete].
[Cancel]links to the Single Camera
screen without deleting.
4) Deleted preset button turns white.
 Go back to step 2 to delete other preset
buttons.
5) Click[Cancel]when finished.
3)
4)
5)
2)
1) 

Operating Instructions
46
3.3.4 ViewingBuffered Image Screen
Buffered Image screen can be viewed by clicking[Viewer]on the operation bar.
Buffered Image is saved in the internal memory of Network Camera by clicking
[Start Capture]. Alarm/Timer mode in the Image Transfer on page 66 can also
buffer the image. Buffered Image is erased by power off, restarting, Update
Firmware, resetting to Factory Default and when Image Transfer or Name/Time
window is saved and clicking[Start Capture].
Operation bar of the...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
Notes
 The refresh interval becomes longer as more clients access Network
Camera.
 The image resolution, image quality and object situation affect the
number of frames in the Buffered Image.
 If internal memory is filled after clicking[Start Capture], the image
buffering will stop automatically.
To save still images on your PC
The PC can save still images taken by JPEG - Regularly Refresh and Buffered
Image. The refresh interval...

Operating Instructions
48
3.4 Multi-Camera Screen
Four separate Network Camera images can be displayed in both Motion JPEG
and JPEG - Regularly Refresh. The Pan/Tilt operation cannot be operated on the
Multi-Camera screen. You can jump to each individual Network Camera by
clicking Camera Name. The Single Camera screen has the Pan/Tilt operation,
which can reflect on the Multi-Camera screen.
Refer to page 81 for how to configure each Network Camera.
Notes
 On the Multi-Camera screen the maximum image...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 49
3.5 Setup Page
Setup Pagecontrols all features of Network Camera. Authentication window
protects the Network Camera security. It enables only administrator to access
Setup Page by entering ID and Password.
Enter http://IP Address (or URL)
:Port No./config.html on the web browser
and press[Enter]. When port number is 80 (default), you do not need to enter port
number. Then Setup Page appears.
Example
 Accessing Setup Page using port...

Operating Instructions
50
Setup Page
Note
Firmware Version number indicated on Setup Page is important for your future
supportofNetworkCamera.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
Version
number