Panasonic Network Camera Kx Hcm230 Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 61
Instructions for the data fields
Authentication
EnableAuthentication window can be set in the three patterns.
None: No authentication window appears. Anyone can
access all screens (Single Camera/Multi-Camera screen)
and pages (Top Page and Setup Page).
Administrator only: Authentication window appears when
accessing Setup Page. Authentication window does not
appear when accessing Top Page.
Administrator and General User: Authentication window
appears when accessing Setup Page for the administrator
and Top Page for the general user.
Administrator
Authentication
for Setup PageID: Enter the administrator ID.
ID and Password are case sensitive.
Password:
Enter the administrator password. The password should be
difficult to guess and confidential.
Refer to unavailable character set 1 on page 103.
Note
Assign the ID and password to meet your specific
security requirements. To maximize its effectiveness,
keep the following contents.
 Be sure the ID and password are different.
 Make the ID and password as long and random
as possible.
 Periodically change the password.
Retype:
Reenter the password to confirm. Do not copy the text.
Top PageAdministrator General User Unregistered User
Setup Page
: Accessible—: Not accessible—
—
Top PageAdministrator General User Unregistered User
Setup Page
: Accessible : Not accessible—
—— — 
						

							Operating Instructions
62
3.5.5 Security: General User
Security: General User windowallows the administrator to create the general
user ID and password for the security level defined as general user. Up to 30
individual user names can be defined. The various security levels are explained
on page 61.
1.Click[Security: General User]on Setup Page.
2.Enter each parameter in the proper data field. Click[Save]when finished.
Click[Cancel]to leave the current settings unchanged. The window
returns to Setup Page without saving the parameters.
 Restart to makeSecurity: General User windowsettings effective to
all Motion JPEG viewers. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 63
Instructions for the data fields
General User
AuthenticationTheGeneralUsercanbeupto30.Eachofthemcan
have their own ID and password.
(1) User ID List User ID List displays the registered user name.
[Delete]and[Modify]deletes/modifies the general
user in the list. Select the desired user and click
[Delete]or[Modify].
(2) New UserEnter the general user ID, password and reenter the
password to confirm. The password should be difficult
to guess and confidential.[Save]registers the new user
in the User ID List. ID and Password are case sensitive.
Refer to unavailable character set 1 on page 103.
Note
Assign the ID and password to meet your specific
security requirements. To maximize its
effectiveness, keep the following contents.
 Be sure the ID and password are different.
 Make the ID and password as long and
random as possible.
 Periodically change the password. 
						

							Operating Instructions
64
3.5.6 Top View Image
Top View Image Setting windowcan change settings for Top Page, Single
Camera and Multi-Camera screen such as the initial language, the image
resolution, image quality, refresh interval as the initial setting,Limit time of
Continuous Motion JPEGandOn the Air time.
1.Click[To p V i e w I m a g e]on Setup Page.
2.Select the each parameter. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters.
 Restart to makeLimit Time of Continuous Motion JPEGsettings
effective to all Motion JPEG viewers.
Instructions for the data fields
LanguageSelect the initial language from the list: English (US), English (UK),
French, German, Italian, Spanish or Japanese. The selected
language is displayed as the initial language on Top Page, Single
Camera screen and Multi-Camera screen. All Setup windows are
also changed when selecting English (US), English (UK) or
Japanese. English (UK) is displayed on Setup windows when
selecting French, German, Italian or Spanish. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 65
Instructions for the data fields
To p P a g e Top Page title can be changed. Enter the new title.
 Refer to unavailable character set 1 on page 103 but [space]
is available.
 Refer to displayable character set on page 104.
 Network Camera picture on Top Page can be changed.
Enter the URL (http://) to display the picture on the specified
web site.
 Only [space] and [] are unavailable in the ASCII character
tableonpage103.
 NetworkCamerapictureonTopPagecanbesetthelinktothe
specified web site. Enter the URL (http://).
 Only [space] and [] are unavailable in the ASCII character
tableonpage103.
Image
Resolution640 x 480(cannot set on the Multi-Camera screen.)
320 x 240(default)
160 x 120
ImageQualityFavor Clarity: Image is optimized for good clarity.
Standard: Image quality is standard. (default)
Favor Motion:
Image is optimized for enhanced motion display.
Refresh
IntervalThe refresh interval of JPEG - Regularly Refresh can be selected.
Select the desired interval.
 10 seconds to 5 minutes
Limit time of
Continuous
Motion JPEGTo make the network traffic smooth, select the duration time to
display Motion JPEG. When the timer expires, the image changes
to JPEG - Regularly Refresh.
 10 seconds to Unlimited
On the Air timeSpecifies the timetable to allow users to access Top View Image
screen. When you access the image except the specified time, blue
screen appears.
Always:Always allows users to access.
Operational between:
Specifies the date and time to access the image. 
						

							Operating Instructions
66
3.5.7 Image Transfer
Image Transfer windowcan set the Image Transfer feature. Network Camera can
buffer images and send the images via e-mail or FTP. The request to send the
image is initiated by a contact closure from the external sensors/devices
connected to the External I/O using the Alarm mode. The external sensors/
devices are customer provided. The images can also be sent in the interval of time
using the Timer mode. Make sure Date and Time has been configured. Refer to
page 58 about Date and Time.
Note
WhenyouuseFTPore-mailintransferringtheimage,youneedtosetDefault
Gateway and DNS Server address.
Note
The Alarm and Timer mode cannot be set at the same time. Non Transfer: Image Transfer feature is not in use.
Alarm mode: The alarm trigger activates transferring the image. Refer to
page 68.
Timer mode: The timer trigger activates transferring the image. Refer to page
74. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 67
Non Transfer mode
Non Transfer mode enables[Start Capture]on the operation bar to buffer the
image on the Single Camera screen. Refer to page 46. Capture Control can lock
[Start Capture]on the operation bar to prevent the user from capturing the
Buffered Image. Click[ClearBuffered images]to clear the buffered image.
[ClearBuffered images]does not save the parameters.
1.Click[Image Transfer]on Setup Page.
2.Select the each parameter. Click[Save]when finished.
 Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters. 
						

							Operating Instructions
68
Transfer in the Alarm Mode
TheAlarmmodecantransferanimageviae-mailorFTPwhenthealarmtrigger
is active. To activate the alarm trigger, the External Sensor Input of External I/O
must be connected with the external sensors/devices. The Alarm mode can send
the e-mail without transferring the image. The Alarm mode uses the Network
Camera internal clock. Make sure Date and Time has been configured. Refer to
page 58 about Date and Time.
1.Click[Alarm]on theImage Transfer window.
c. b. a.
d.
e.
f. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 69
Instructions for the data fields
a.External Sensor Input of External I/O activates the alarm trigger. Refer
to page 101.
b.Active Time of Trigger
The active trigger time can be set in the primary time and the
secondary time. The secondary time is the supplement of the primary
time.
Always: always activates the alarm trigger.
Operational between: Sets the start and stop time of the primary time.
The day of the week can be set by checking. Start and stop time is set
only in 24 h time mode.
Alarm enable condition:
Select the [Rising] (GND to Open High) or [Falling] (Open High to GND)
of External Sensor Input of the External I/O.
c.Secondary timeis active trigger time except the primary time.
Alarm enable condition:
Select the [Rising] (GND to Open High) or [Falling] (Open High to GND)
of External Sensor Input of the External I/O.
d.Sets theimage resolutionandimage quality.
Image resolution: 640 x 480/320 x 240/160 x 120
Image quality: Favor Clarity/Standard/Favor Motion
e.The Pre or Post trigger or both can be set on the Buffered Image. Check
the box.
f.Image Frequency: Sets the interval to send the image.
Maximum number of images per each trigger:
Selects the number of buffering frames from numbers 1 to 3000. 
						

							Operating Instructions
70
a.SelectsTransfer Method.
Non Transfer without Memory Over Write:
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write:
Buffered image will overwrite the older image data when the internal
memory is full.
FTP: Enters the server address*
1or Host Name*2, Port Number (1—
65535), Login ID*2and password*2to access the FTP server and
upload file name*2including full path. Time in 24 h mode is attached on
theuploadfilename.
Login timing:
[Every Time] or [One Time] can be selected. When selecting [Every
Time], Network Camera repeats logging in and out with each transfer
of one image. When selecting [One Time], Network Camera stays
logged in until the transfer of all images is completed. Select [One
Time] when transferring many images in short duration time.
a.
b.
c.