Panasonic Network Camera Bl C30a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 51
4.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.Setting Description
User ID List  Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15...

Operating Instructions
52
2.11 Changing Initial Settings on the Single 
Camera page or the Multi-Camera page
The Image Display page allows you to change initial settings (display settings when 
a user accesses the camera) of image resolution, image quality and refresh 
interval. Motion JPEG display time can be set here.
1.Click [Image Display] at the top of the page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 53
3.Click [Save] when finished.
 New settings are saved.Setting Description
Image Resolution  Select the image resolution.
640 x 480 pixels (Only for the Single Camera page)
320 x 240 pixels (default)
160 x 120 pixels (Only for the Multi-Camera page)
Image Quality  Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality.
[Favor Motion] optimizes for...

Operating Instructions
54
 When finished, Success! is displayed.
4.Click [Go to Image Display page].
 The Image Display page is displayed. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 55
2.12 Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure the camera IP addresses 
and camera names to view multiple images on the Multi-Camera page (maximum 
12 cameras). These configurations are required to use the Multi-Camera page.
1.Click [Multi-Camera] on the Setup page.
2.Click [Add].
Notes
 If you click the camera number, the modification page is displayed. The...

Operating Instructions
56
Notes
 If your camera will only be accessed on your local network, use each 
cameras local IP address and port number.
 If you intend to access your camera from the Internet, you must use each 
cameras global IP address and respective port number.
4.Click [Save] when finished.
 New settings are saved.
 The Multi-Camera Setup page is displayed.Setting Description
Display  Check the box to enable the camera.
IP Address
*1 or 
Host Name*2 Set the IP address or the host name...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 57
2.13 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete this buffered images.
 Click [Save] to save the...

Operating Instructions
58
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 40).
 Clicking [].
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 59
6.Set the image buffer frequencies, and click [Next>].
 Clicking [

Operating Instructions
60
7.Select the transfer method, and click [Next>].
 Clicking [